Woodworking Tools

Soba Miniature Woodworking Kit  (Ref: 290125)

A superb minauture woodworkers kit. Excellent to use for small precise jobs.
Three Different Types of Plane- These planes are very useful where a standard plane would be too large . Manufactured from selected brass Steel blades are fully hardened and tempered
Bull Nose , Scraper and Block Planes are included
A small 3 Try Square - with a rosewood stock and brass sideplate
Adjustable 3 3/4 " Bevel - made of a Rosewood stock and with forged brass wing nuts & endcaps. Hardened steel blade
Range 0- 180 degrees
All supplied in a nice wooden case.

£22.73

£27.28

Auger Drill Set 6PC  (Ref: SDY011)

Unbeatable quality drills. Combination fitting suitable for traditional brace or electric drill. Precision ground to bore fast with clean results. Sizes 6 -8 -10- 12 -16 & 20 mm

£13.38

£16.06

Auger Drill Set 8 PC  (Ref: SDY012)

Unbeatable quality drills. Combination fitting suitable for traditional brace or electric drill. Precision ground to bore fast with clean results. Sizes 10- 12 -14-16-18- 20-22 & 24 mm

£22.73

£27.28

Counterbore Sets  (Ref: SDY028..)

Set of seven pcs HSS Available in metric or HSS .

£7.24

£8.69

Forstener Bit Set  (Ref: SDY019)

Effortlessly drills much larger holes than conventional flat or auger bits. Contains 5 Pits plus spanners etc
15mm 20mm 25mm 30mm & 35mm

£11.80

£14.16

Hold Down Feather Board  (Ref: SDY235)

This product comes in handy when ripping long pieces of narrow stock . Great for ripping or moulding. Fits into 3/4" mitre gauge slot , then locks easily into position with a twist of a thumb screw. Puts pressure on the top and against stock , preventing kickback , ride up and inacuracy.

£6.33

£7.60

Magnetic Tool Holder  (Ref: SDY247.)

Very useful addition to any workshop.Secure to the wall with screws Strong permanent magnet will secure all heavy tools with no slipping. These holders are 20" long and have a universal adaptor each end to allow them to be joined into much longer lengths
SPANNERS NOT INCLUDED!!

£11.80

£14.16

Adjustable Circle Hole Cutter  (Ref: ADKl)

Capacity 30-120mm. Complete with M2 cutter blades & centre drill Bit. Shank Dia 10mm. Fuly graduated in metric & Imperial.

£9.06

£10.87

Drill/Countersink Set  (Ref: SDY029)

Set of 4. Drills a clearance hole & countersinks in one operation. Ready fitted to a high performance wood drill with centre point. Dpth is adjustable. Sizes 3,4,5 & 6mm

£9.06

£10.87

Carpenters Try Square 3"  (Ref: SI105)

A good quality try square with brass faces polished shesham wood stock. Chemically blackened fixed steel blade secured with 3 brass rivets.

£4.10

£4.92

Carpenters Try Square 6"  (Ref: SI106)

A good quality try square with brass faces polished shesham wood stock. Chemically blackened fixed steel blade secured with 3 brass rivets.

£6.33

£7.60

Carpenters Try Square 9"  (Ref: SI109)

A good quality try square with brass faces polished shesham wood stock. Chemically blackened fixed steel blade secured with 3 brass rivets.

£9.06

£10.87

Adjustable Bevel 95mm  (Ref: ADB1)

Adjustable Bevel 180mm  (Ref: ADB2)

Adjustable Bevel 250mm  (Ref: ADB3)

Marking Gauge  (Ref: SI110)

made from polished Shesham wood with a single hardened marking spur and a plastic turn screw

£3.61

£4.33

Hobby Brass Planes  (Ref: SI..)

Beautiful Mini planes available in twos styles
72MM LONG
12MM BLADE

£7.24

£8.69

Emir 24 Mitre Block 300mm  (Ref: EMI22412)

This mitre block is of solid beech construction with accurate straight and mitre slots for guiding tenon or back saw.
The internal corner is recessed to accommodate dust.
Length 12in/300mm. Capacity 45mm - 1.3/4in High.

£9.06

£10.87

Emir 24 Mitre Block 225mm  (Ref: EMI2249)

This mitre block is of solid beech construction with accurate straight and mitre slots for guiding tenon or back saw.
The internal corner is recessed to accommodate dust.
Length 9in/225mm. Capacity 35mm - 1.3/8in High.

£3.78

£4.54

HSS Miniature Chisel Set  (Ref: SI120)

Set of five assorted Chisels in a wooden box
SORRY- OUT OF STOCK

£22.73

£27.28

Stainless Steel Gouges  (Ref: SI121)

A set of 3 assorted stainless stell gauges. Hardened & Ground supplied in storage wallet.

£11.26

£13.51

Faithfull 3 Piece Turning Set  (Ref: FAIWTTSET3)

3 Piece Carbon Steel Woodturning Set. This Ideal Starter Set contains 1 of each;
1/2in x 1/4in Parting Tool. - 1/2in Skew End. - 1/2in Turning Gouge.

£41.84

£50.21

Quick Release Dividers  (Ref: SI....)

Square Legs. Points are hardened. Available in a choice of lengths

6" Wing Divider with carbide scriber  (Ref: SI126)

Specially designed to hold a carbide scriber (included) or a pencil. Points are made of hardened steel

£6.33

£7.60

8" Wing Divider with carbide scriber  (Ref: SI127)

Specially designed to hold a carbide scriber (included) or a pencil. Points are made of hardened steel

£7.24

£8.69

10" Wing Divider with carbide scriber  (Ref: SI128)

Specially designed to hold a carbide scriber (included) or a pencil. Points are made of hardened steel

£9.97

£11.96

12" Wing Divider with carbide scriber  (Ref: SI129)

Specially designed to hold a carbide scriber (included) or a pencil. Points are made of hardened steel

£12.71

£15.25

MT Prong Drive SORRY OUT OF STOCK  (Ref: SI130)

Prong Drive available in 1 or 2 morse taper

Live Centres  (Ref: LC...w)

Double bearing mechanism with hardened centre shaft and special steel housing. Run out within 0.002". Available 1MT , 2MT or 3MT

Double Ended Outside Calipers 6"  (Ref: CD005)

Double Ended Outside Calipers 7"  (Ref: CD001)

Double Ended Inside/Outside Calipers 9"  (Ref: CD002)

Double Ended Inside/Outside Calipers 7"  (Ref: CD003)

Double Ended Inside/Outside Calipers 4"  (Ref: CD004)

Narrow Double Ended Outside Calipers 6"  (Ref: CD006)

3/4 x 2" Diamond Pad on handle  (Ref: L1)

Very effective in hard to get places, carbide table saw blades, router bits, deburring. many uses include - hunting and fishing knives, axes, woodworking tools,lathe tools and carbides.

Set of 3 Hones SORRY OUT OF STOCK  (Ref: LPAKH1)

Set, 1 each 3/4" x 2", Super Fine Grit (1200), Fine Grit (600), Medium Grit (400) diamond pads. Color coded handles.

£18.17

£21.80

Foldaway Diamond Hone Fine  (Ref: 5011)

EZE-FOLD models have a carring case that unfolds into a handle. When closed the case protects the diamond surface. When open the case becomes a functional handle.

£13.61

£16.33

1 x 3 Fine Diamond Pad on a Walnut Pedestal  (Ref: 22F1)

These diamond stones are perfect forlathe tools, woodworking tools, exacto blades, axes and industrial use. No oil or water is necessary, the surface will remain true and flat.

£11.38

£13.66

6 x 2 Fine Diamond Stone on a Walnut Pedestal  (Ref: 62F1)

These diamond stones are perfect forlathe tools, woodworking tools, exacto blades, axes and industrial use. No oil or water is necessary, the surface will remain true and flat.

£27.27

£32.72

Set of 6 Diamond Needle Files  (Ref: 600F1)

Gunsmiths, tool and die makers , jewelers, stockmakers, rely on EZE-LAP needle files to get the job done. Do not confuse these with cheap Chinese imports!!

£22.73

£27.28

Universal Work Holder  (Ref: UV11)

Originally designed as an engravers vice, this extremely useful tool is comfortable to hold and easy to use. The pin arrangement can easily be modified to suit the shape of the work - then you simply tighten the vice.Can be used in another vice or hand held. Capacity 60 mm.

£9.97

£11.96

Woodworkers Squares  (Ref: ES2/4/6w)

Made of finest steel. Hardened blade. Accuracy
BS929.These squares are accurate both inside and outside.
Abvailable in a choice of blade length

Woodworking Dividers  (Ref: DW)

Spring is hardened and tempered. Legs are machined to rigid length and balance. Adjusting washer and nut allow fast and positive adjustment. Polished finish. Available in 4 sizes

Woodworking Outside Calipers  (Ref: O...W)

Spring is hardened and tempered. Legs are machined to rigid length and balance. Adjusting washer and nut allow fast and positive adjustment. Polished finish. Available in 4 sizes

Fretsaw  (Ref: FS1w)

This frame is exceptionally rigid and well balanced with a comfortable hardwood handle. The design of the bow allows the blade to be tensioned as it is clamped in the frame. A firm grip is maintained on the blade by hardened & serrated clamps operated by screws & wingnuts. The fretsaw is used to cut thin sheet materials with the saw teeth set to face the handle and working on the pull stroke. A pack of thirty popular blades is available.

£9.43

£11.32

Woodworking Inside Calipers  (Ref: I...W)

Spring is hardened and tempered. Legs are machined to rigid length and balance. Adjusting washer and nut allow fast and positive adjustment. Polished finish. Available in 4 sizes

Coping Saw  (Ref: CS100w)

The coping saw is designed to make curved cuts in wood and plastic. Coping saw blades are very narrow with pinned ends and fine teeth set at 14tpi. The high quality steel blade is accurately heat treated to give the correct combination of hardness & toughness. A pack of ten blades is available.

£7.24

£8.69

Brass Pocket Vernier 4"/100mm  (Ref: BV7w)

These brass pocket verniers are extremely popular.
Reading both metric & imperial 4"/100 mm

£4.50

£5.40

Protractor  (Ref: MP965w)

Made of stainless steel complete with locknut. Measures angles from 0 - 180 '.

£5.01

£6.01

Combined Depth Gauge Protractor  (Ref: DGP1w)

This has permanantly etched graduations from 0-180 degrees in opposite directions . The depth gauge rule is 6" (150mm) long with a 1/4 (6mm) width. It has graduations to 32nds and 64ths. It is a useful tool for setting bevels and transferring angles. It can be locked with the help of a spring tension nut.

£5.01

£6.01