Indexable Endmills & Sets



Little Hogger Set  (Ref: LHS)

Little Hogger Set

LITTLE HOGGER INDEXABLE ENDMILL SET NEW!!
· 1" diameter x 3/4 " shank- 2 flutes
· Mill at 5 times the speed of HSS tools plus feed at an average rate of 12" per minute
· Standard 3/4" Weldon Shanks
· Uses standard carbide inserts
· Easy insert replacement
· Uses: TNMA 322: 90deg SNMA 322 RNMA 32: 3/16R






£27.27 £32.72


Quantity:  


People who bought this item also bought:
1. Spare Tips for Little Hogger Set (Ref: LH)
2. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills (Ref: IMH5)
3. 3/8 MILD STEEL ROUND (Ref: MS38)





Spare Tips for Little Hogger Set  (Ref: LH)

Spare Tips for Little Hogger Set



Choose Tip


Quantity:  


People who bought this item also bought:
1. Little Hogger Set (Ref: LHS)
2. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills (Ref: IMH5)
3. Square Toolsteel - cobalt HSS square Tool steel - 3/8 sq x 2 1/2 long (Ref: HS382)





Small Straight Shank Indexable Endmills  (Ref: TCE)

Small Straight Shank Indexable Endmills

These endmills have a 1/2" parallel shank with a flat for grubscrew location and a single carbide tip. Overall length 3"



Size


Quantity:  


People who bought this item also bought:
1. Wire Gauge Drill Number 42 (Ref: ND42)
2. Set of 5 Spare Inserts 1/2 Tool Set (Ref: XC76A)
3. Wire Gauge Drill Number 40 (Ref: ND40)





Glanze 2MT Indexable Endmill 16mm Head XC282  (Ref: 761416)

Glanze 2MT Indexable Endmill 16mm Head XC282

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
2MT Shank - Tapped 10mm for a drawbar
16mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
1 High Quality Carbide Insert






£28.04 £33.65


Quantity:  


People who bought this item also bought:
1. Spare insert for 2Mt indexable Endmills (Ref: IMH52)
2. Silicone O Rings (Ref: SR...)
3. 1/4 X 1/2" MILD STEEL FLAT (Ref: MS1412)





Glanze 2MT Indexable Endmill 20mm Head xc283  (Ref: 761420)

Glanze 2MT Indexable Endmill 20mm Head xc283

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
2MT Shank - Tapped 10mm for a drawbar
20mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
High Quality Carbide Inserts






£30.86 £37.03


Quantity:  


People who bought this item also bought:
1. Spare insert for 2Mt indexable Endmills (Ref: IMH52)
2. CCMT INSERT FOR A SUPERIOR FINISH ON ALUMINIUM ETC (Ref: CGGT)
3. 25 MM NYLON ROUND (Ref: NYR25)





Glanze 2MT Indexable Endmill 25 mm Head  (Ref: 761425.)

Glanze 2MT Indexable Endmill 25 mm Head

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
2MT Shank - Tapped 10mm for a drawbar
25mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
2 High Quality Carbide Inserts






£31.90 £38.28


Quantity:  


People who bought this item also bought:
1. Spare insert for 2Mt indexable Endmills (Ref: IMH52)
2. ISO 9 Boring Tool (Ref: 13096..)
3. 60 Degree Metric Internal Threading (Ref: 1311...)





Glanze 3MT Indexable Endmill 32mm Head  (Ref: 761532)

Glanze 3MT Indexable Endmill 32mm Head

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
32mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts






£32.88 £39.46


Quantity:  


People who bought this item also bought:
1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills (Ref: IMH5)
2. 1 Litre of Multispec Slideway Oil (Ref: SL1)
3. Small Inserted Blade Parting Tools (Ref: PTO....)





Glanze 3MT Indexable Endmill 40mm Head XC286  (Ref: 761440)

Glanze 3MT Indexable Endmill 40mm Head XC286

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
32mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
2 High Quality Carbide Inserts






£35.53 £42.64


Quantity:  


People who bought this item also bought:
1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills (Ref: IMH5)
2. Engineers Squares (Ref: ES2/4/6)
3. Glanze 3MT Indexable Endmill 50mm Head (Ref: 761450)





Glanze 3MT Indexable Endmill 50mm Head  (Ref: 761450)

Glanze 3MT Indexable Endmill 50mm Head

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
50mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts






£37.40 £44.88


Quantity:  


People who bought this item also bought:
1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills (Ref: IMH5)
2. 4BA HSS Taps (Ref: 4BA..)
3. New Combined Wiggler and Edge Finder Set SORRY OUT OF STOCK (Ref: GX73.)





Glanze R8 Indexable Endmill 32mm Head XC288  (Ref: 761632)

Glanze R8 Indexable Endmill 32mm Head XC288

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
32mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
2 High Quality Carbide Inserts






£42.01 £50.41


Quantity:  


People who bought this item also bought:
1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills (Ref: IMH5)
2. R8 Collet 16 MM (Ref: R816)
3. Dividing Set for HV8 Rotary Table- (Ref: 110265)





Glanze R8 Indexable Endmill 40mm Head XC289  (Ref: 761640)

Glanze R8 Indexable Endmill 40mm Head XC289

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
40mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
2 High Quality Carbide Inserts






£43.96 £52.75


Quantity:  


People who bought this item also bought:
1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills (Ref: IMH5)
2. Spare Insert (Ref: APTK)
3. Glanze R8 Indexable Endmill 50mm Head (Ref: 762650)





Glanze R8 Indexable Endmill 50mm Head  (Ref: 762650)

Glanze R8 Indexable Endmill 50mm Head

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
50mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts






£45.83 £55.00


Quantity:  


People who bought this item also bought:
1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills (Ref: IMH5)
2. Set 3 Spare HSS Cutters for Above (Ref: FC38B)
3. Tailstock for HV8 Rotary Tables (Ref: 110247)





Standard 25mm Head Straight Shank Indexable Endmills  (Ref: IMH1)

Standard 25mm Head Straight Shank Indexable Endmills

These endmills have a 20 mm parallel shank with a flat for grubscrew location. Complete with tips.






£15.32 £18.38


Quantity:  


People who bought this item also bought:
1. Standard 32mm Head Straight Shank Indexable Endmills (Ref: IMH2)





Standard 32mm Head Straight Shank Indexable Endmills  (Ref: IMH2)

Standard 32mm Head Straight Shank Indexable Endmills

These endmills have a 20 mm parallel shank with a flat for grubscrew location. Complete with tips.






£19.57 £23.48


Quantity:  


People who bought this item also bought:
1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills (Ref: IMH5)
2. Spare Torx Screw for CCMT/TX (Ref: TXS01)
3. 12 PC Set of HSS Metric Centre Drills (Ref: CDWS)





Standard 40mm Head Straight Shank Indexable Endmill  (Ref: IMH3)

Standard 40mm Head Straight Shank Indexable Endmill

These endmills have a 20 mm parallel shank with a flat for grubscrew location. Complete with tips.






£24.68 £29.62


Quantity:  


People who bought this item also bought:
1. Spare Tips for Little Hogger Set (Ref: LH)
2. Set of 7 Soba Precision Parallels 150mm Long SORRY OUT OF STOCK (Ref: 111670)
3. Soba Fully Adjustable Magnetic Stand for Dial Gauges with Push Button (Ref: 111940)





Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills  (Ref: IMH5)

Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills






£2.98 £3.58


Quantity:  


People who bought this item also bought:
1. Glanze 3MT Indexable Endmill 32mm Head (Ref: 761532)
2. Glanze 3MT Indexable Endmill 40mm Head XC286 (Ref: 761440)
3. Glanze 3MT Indexable Endmill 50mm Head (Ref: 761450)





Spare insert for 2Mt indexable Endmills  (Ref: IMH52)

Spare insert for 2Mt indexable Endmills






£2.98 £3.58


Quantity:  


People who bought this item also bought:
1. Glanze 2MT Indexable Endmill 25mm Head (Ref: 761425)
2. Glanze 2MT Indexable Endmill 16mm Head XC282 (Ref: 761416)
3. Glanze 2MT Indexable Endmill 25 mm Head (Ref: 761425.)





NEW GLANZE 7PC TURNING, BORING & MILLING SET  (Ref: GPT..)

NEW GLANZE 7PC TURNING, BORING & MILLING SET

NEW - PROFESIONAL QUALITY SET. INCLUDES 3 TURNING TOOLS LH - RH & STRAIGHT , 1 X BORING BAR - PLUS 3 INDEXABLE ENDMILLS. 10 mm shanks






£47.83 £57.40


Quantity:  


People who bought this item also bought:
1. Metric DTi and small Base (Ref: smt221met)
2. Optical Centrepunch (Ref: OP270SPEC,)
3. 3MT Dead Centre (Ref: GX7)





SET OF 3 INDEXABLE ENDMILLS  (Ref: SCT137S)

SET OF 3 INDEXABLE ENDMILLS

SET OF 3 WITH A 1/2" SHANK - SHANK - 1" LONG - OVERALL LENGTH 3"
INCLUDES THE FOLLOWING HEAD DIAMETES
1/2 - 9/16 & 5/8


Click for a bigger picture of: SET OF 3 INDEXABLE ENDMILLS





£27.27 £32.72


Quantity:  


People who bought this item also bought:
1. Spare insert (Ref: SCT137SS)
2. M10 x 1 Carbon Taps (Ref: M101C..)
3. New- Set T Studs Clamps & T Strip to Suit Myford (Ref: MTS8)





Spare insert  (Ref: SCT137SS)

Spare insert






£4.26 £5.11


Quantity:  


People who bought this item also bought:
1. SET OF 3 INDEXABLE ENDMILLS (Ref: SCT137S)
2. New- Set T Studs Clamps & T Strip to Suit Myford (Ref: MTS8)





Engineering Menu > Boring Heads , Boring Bars , Indexable Endmills & Flycutters  >  Indexable Endmills & Sets



Indexable Endmills & Sets - Buy online at Chronos (call us or click live chat for help with Indexable Endmills & Sets)


Visit our engineering blog