Engineering Menu > Proxxon 12v & 240v Precision Workshop Tools > 240v Hand Held Proxxon Tools
Multiple uses; cuts, sands, polishes and grinds, etc. 0.3-3.2mm keyless chuck Variable speed Two inset rubber body grips Permanent magnet motor Maximum motor power 100W Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories This 100W multi tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories. Specification for Proxxon FBS 240/E Precision Drill/Grinder Multi -Tool: Chuck: Cap/Type 0.3 to 3.2mm keyless Model: FBS 240/E Nett Weight: 450g Power: 100W Speed: 5,000-20,000rpm
SPECIAL OFFER Multiple uses; cuts, sands, polishes and grinds, etc. 0.3-3.2mm keyless chuck Variable speed Two inset rubber body grips Permanent magnet motor Maximum motor power 100W Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories Dura-Grit are powerful, long lasting cutting and shaping tools that finish as they cut! This starter set gives you everything you need for carving and shaping! They are unique, strong, carbide coated steel shapes, mounted on 3.2mm(1/8") heavy duty mandrels. Made with tungsten-carbide grit, braze welded to steel, Dura-Grit tools are extremely strong and aggressive. This 100W multi tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories. Specification for Proxxon FBS 240/E Precision Drill/Grinder Multi -Tool: Chuck: Cap/Type 0.3 to 3.2mm keyless Model: FBS 240/E Nett Weight: 450g Power: 100W Speed: 5,000-20,000rpm
Very precise and accurate Aluminium motor casing Variable speed (5,000-20,000rpm) Supplied in carrying case with 30 accessories Six collets from 0.8mm to 3.2mm A very precise and accurate mini-tool drill with an aluminium motor casing and variable speed (5,000-20,000rpm) suited to professional use in the workshop. The aluminium casing dramatically reduces any potential bearing problems resulting in an exceptionally smooth and vibration free tool to use. Supplied in a carrying case with 30 accessories and full set of six collets from 0.8mm to 3.2mm Please note that this unit will not accept a keyless chuck.
Ideal for use in inaccessible areas. Die-cast aluminium head 100mm neck and 20mm MICROMOT collar Mill, drill, grind, polish Allows use in slots and channels High-revving, special motor, full-wave electronic speed control Ground steel spindle runs in a ball bearing, minimising play Six triple slit, hardened steel collets 1.0 to 3.2mm and closure nut included Ideal for use in inaccessible areas, for milling, drilling, grinding and polishing operations. The head is die-cast aluminium with a 100mm neck and 20mm MICROMOT collar. The design allows the LB/E to be used in slots and channels and makes it ideal for internal cuts. The high-revving, special motor has full-wave electronic speed control and is usable for extended periods. The ground steel spindle runs in a ball bearing, minimising play. Six triple slit, hardened steel collets 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm and closure nut are included. With lock button for rapid cutter changing.Technical Data: 220 - 240V. 50/60Hz. 5,000 to 20,000rpm. Stable head of die-cast alu and fibreglass reinforced POLYAMIDE main housing. Length 300mm. Weight 630 g. Insulated to class 2. The 20mm collar allows fitting of optional drill stands, horizontal stands, etc.
Ideal for milling, drilling and more in hard to reach places, e.g. in model ships' hulls, as well as the cutting of small timber pieces. Special, balanced motor with maximum power output of 100W, full wave electronic speed control. Variable speed 3,000 - 15,000rpm Head of die-cast: aluminium Housing made of fibreglass reinforced POLYAMIDE Power: 100W Supplied with 6 collets, 1.0 to 3.2mm
Small, handy and powerful Powerful and durable permanent magnet motor for high loads Smooth running planetary gear in die-cast aluminium housing Handy switch with integral speed control & lock. Varible speed 0 - 3,000rpm ROHM chuck capcaity: 0.5 - 6.0mm Packed in a sturdy plastic carrying case Drilling capacity in steel 5.0mm Powerful and durable permanent magnet motor for high loads. Smooth running planetary gear in die-cast aluminium housing. Handy switch with integral speed control and lock. With ROHM chuck. Packed in a sturdy plastic carrying case.
MICROMOT steel collets fit all handheld MICROMOT machines, excluding the engraver GG 12. One each 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm, clamping nut and holder for storage are included. MICROMOT steel collets are hardened and thus have a high, consistent flexibility. They also maintain prolonged accuracy, even after regular use (these collets should not be compared with unhardened, four-slit collets of brass and aluminium). The triple slit collet is substantially more difficult to manufacture than the four-slit type, but offers a better load-bearing surface. This is especially important for cutters with small shaft diameters.
A three jaw keyless chuck for use on all MICROMOT machines, excluding GG12, IB/E, LB/E and COLT2. The capacity is from 0.3mm to 3.2mm.
For steel, non-ferrous metals, glass, ceramics, wood and plastic Supplied with grinding disc, fan sander and cutting disc in neat plastic case Quiet and long lasting DC motor For working with steel, non-ferrous metals, glass, ceramics, wood and plastic. For cutting, rough-machining, grinding, precision polishing, fine polishing and carving wood. It features a specially balanced, 100W powerful, quiet and long lasting DC motor. Supplied with a grinding disc (60 grit), fan sander (100 grit) and cutting disc in neat plastic case. This grinder will accept the blades for the arbortech mini carver which further increases its potential for texturing and carving. Disc Diameter: 50mm Length:: 250mm Model LWS Nett Weight 550g Power: 100W Speed: 13,000rpm
This is a high quality industrial power tool albeit much reduced in size from the norm, therefore perfectly suited to smaller more intricate tasks or delicate finishing or refining. It is designed for shape finishing and fine polishing (flat surfaces). Also extremely useful for de-burring metal, paint removal and fine finishing. The powerful 100W motor features full wave electronic speed control. The head is die-cast aluminium with the main housing made of fibreglass reinforced polyamide. The head can be angled at 0°, 45° and 90° to the body at the press of a button. The sanding belt can be changed in a matter of seconds. Packed in durable plastic case, including 4 sanding belts (2 of each 80 and 180 grit). 100W powerful motor Variable speed 300 - 700 m/min Sanding belt only 10mm wide Die-cast aluminium head; fibreglass reinforced POLYAMIDE body Total length only 350mm, weight: 650g Perfect for intricate jobs, delicate finishing or refining The head can be angled at 0°, 45° and 90° to the body Supplied in case, including 4 sanding belts (2 of each 80 and 180 grit)
MICROMOT tool holder, for stationary use of MICROMOT electrical precision tools with metal head in combination with a vice. Especially suited for industrial drill/grinder IB/E, belt sander BSL 220/E, longneck angle grinder LWS, super jig saw SS 230/E and delta sander OZI 220/E. Made of glass-fibre reinforced POLYAMIDE NOTE POWER TOOL & VICE ARE NOT INCLUDED
80 Grit Corundum on tear-resistant, woven backing with burrs made from silicon carbide for grinding and de-burring of glass and ceramics. Also suitable for grinding brass, steel and cast iron. . Sands metal, non-ferrous metals, wood and plastics efficiently. 10 x 330mm.
180 Grit Corundum on tear-resistant, woven backing. Sands metal, non-ferrous metals, wood and plastics efficiently. 10 x 330mm.
120 Grit Corundum on tear-resistant, woven backing. Sands metal, non-ferrous metals, wood and plastics efficiently. 10 x 330mm.
80 Grit Corundum on tear-resistant, woven backing. Sands metal, non-ferrous metals, wood and plastics efficiently. 10 x 330mm.
Precision equipment for cutting. Small & comfortable. Die-cast aluminium head Excellent cutting capacity for smaller work Housing head is die-cast aluminium for longevity Foot is adjustable up to 45° for mitre cuts Stroke speed is variable by a full wave electronic speed control 2,000 - 4,500 per min Ideal for very tight curves in wood, PC cards to 5mm & non-ferrous metals to 3mm Complete with storage case & 4 Super-Cut blades for wood, plastic & metal This is a precision jigsaw for cutting smaller and more intricate work. The main housing is die-cast aluminium for longevity. The base tilts up to 45° for mitre/angled cuts. The stroke speed is variable between 2,000 and 4,500 strokes per minute, with full wave electronic speed control. An ideal tool for cutting very tight curves in wood, PC cards (up to 5mm thick) and non-ferrous metals (up to 3mm thick). It is supplied in tough moulded case with 4 Super-Cut blades for wood, plastic & metal. Maximum power consumption 100W, 220 - 240V. Stable head of die-cast aluminium; main housing made of fibreglass reinforced polyamide. Length 230mm. Weight 700g. Insulated to class 2.
Jig saw blades made of HSS. Tooth pitch of 1.06mm, with teeth set and ground. Usable on metals, non-ferrous metals, aluminium and softer alloys, fibreglass, Plexiglass and insulating materials. Fits SS 230/E and STS 12/E. Pack of 2
Jig saw blades made of special steel. Pitch of 1.5mm, teeth ground and set. Usable on hard and soft woods, plywood, fibreglass reinforced sheets as well as soft plastics. Fits SS 230/E and STS 12/E. Pack of 2
Oscillating motion ensures lack of vibration & kickback Head of die-cast zinc, ensuring exact & stable housing for the working parts For very tight spots, e.g. corners, sides & inaccessible areas Variable speed facility ensures the correct speed for every material 3,000 - 10,000 orbits per minute Self adhesive sanding pads ensure quick changing & optimum usage Simply remove & rotate through 120° for a fresh corner. Sanding area 65 x 65 x 65mm Supplied with 4 sanding sheets (2 x 80grit, 1 each 150 and 240grit) This multi use tool will sand, cut and rasp with the various accessories available. Using an oscillating motion the triangular head allows sanding in very tight spots, e.g. corners, sides and inaccessible areas, as well as the fitting of sawblades, scraper heads and files. The variable speed facility ensures the correct speed for every material, between 3,000 and 10,000 per minute. The head is die-cast zinc, ensuring exact and stable housing for the working parts, the main housing made of fibreglass reinforced POLYAMIDE. The oscillating motion ensures lack of vibration and kickback. Length 230mm, weight 630g, insulated to class II. The OZI is supplied with 4 sanding pads of different grits.(2 x 80grit, 1 each 150 and 240grit). Option: Additional sanders/blades: Flexible Scraper Blade - 50 x 70mm , HSS Cutting Blade - 65mm, Delta Sanding Sheets 80grit (Pkt 5), Delta Sanding Sheets 150grit (Pkt 5), Delta Sanding Sheets 240grit (Pkt 5), Delta Sanding Sheets 80grit (Pkt 25), Delta Sanding Sheets 150grit (Pkt 25), Delta Sanding Sheets 240grit (Pkt 25), Diamond File for OZI - 120 grit, Diamond File for OZI - 150 grit, HSS Plunge Saw Blade - 8mm wide, HSS Plunge Saw Blade - 14mm wide, Diamond Cutting Blade - 65mm
8mm for exact square excavations & other forms. For making hatchways & windows in ship & aircraft models. Cuts wood, plywood, plastics & aluminium. Max plunge depth 16mm
16mm for exact square excavations & other forms. For making hatchways & windows in ship & aircraft models. Cuts wood, plywood, plastics & aluminium. Max plunge depth 16mm
Cuts marble, brick, plaster and many other materials in the sanitary and electrical fields. The segment cut facilitates cutting right into corners.
Small compact sander for modelling Fine adjustment for the rollers prevents belt run off 40mm wide Spring clamping system for easy tool-less replacement of belts Supplied in a sturdy plastic carrying case with 5 each 120g and 240g sanding belts and screw clamp Compact, light and well balanced, (only 175mm long) with super driving power for maximum sanding performance! The 40mm wide sanding belt is located flush on the left side to allow surfaces to be sanded "right down to the corner". A fine adjustment for the rollers prevents run off on the side. Spring clamping system for easy replacement of belts without tool. Supplied with a sturdy plastic carrying case together with 5 each 120 grit and 240 grit sanding belts and a clamp for stationary, inverted use.
SPECIAL OFFER For joiners, model makers and woodcarvers Special balanced, low noise DC motor Includes 3 Japanese bi-metal blades Supplied in storage case The Proxxon MOS carver features a low noise 50W DC motor with extremely high life expectancy, the gear head is made of die-cast aluminium and the main housing, glass-fibre reinforced polyamide. It is excellent for the carving of all types of wood and plaster. Very popular for woodcarving, antique restoration and lino cuts, the MOS is supplied in a carry case along with three high-grade Bi-metal Japanese blades (Gouge, vee tool and Chisel). This great value package includes the Proxxon MOS carver, the Flexcut Slipstrop c/w compound and a set of four Flexcut RG detail gouges. Length: 230mm Model: MOS Nett Weight: 680g Power: 50W
Super-quality bimetal (made in Japan). One each V-form, large and small rounding-off, flat with a straight and a rounded end.
Designed for small work and modelling projects Equipped with an adjustable side fence and dust extraction hose Supplied c/w a collet set in sizes 1, 1.5, 2, 2.4, 3, and 3.2mm Compact but fully equipped miniature plunge router for small work and modelling projects. The 130 watt single speed motor runs at 27,500 rpm for a smooth finished cut on a variety of materials. Small but sturdily built with a base plate measuring 70 x 100mm, equipped with an adjustable side fence and dust extraction hose. Supplied complete with a collet set in sizes 1, 1.5, 2, 2.4, 3, and 3.2mm covering most likely cutter and accessory sizes.
Light, small and quiet Supplied with AB 100 airbrush and two paint containers The set is light, small and quiet. With adaptor and 200cm hose to connect to the Proxxon AB 100 air brush, it is also supplied with two paint containers. The single action airbrush AB 100 is ideal for the beginner. Plastic hand piece with adjustable nozzle. N.B. This compressor is suitable for airbrush purposes only. Capacity 12 litres / minute Max Pressure 29psi Model MK240 Nett Weight 1.3kg Noise Level 70dB Overall L x W x H 140 x 120 x 95mm Power 85W
Glues quickly & efficiently Metal, wood, plastic, Ceramics, glass, Cardboard & leather Depending on the material and on the adhesive quantity applied, the adhesive sets after about 30 seconds, allowing positional corrections within this period of time (impossible with instant glues). The 7mm glue sticks are perfect for delicate work such as model build-ing, toy and jewellery making, dried flower arrangements, etc. Sensitive mechanical feed ensures correct glue quantity delivery. Integral stand positions gun on worktop when not in use. Short heating time. Technical data: 220 - 240V. PTC controlled element for exact temperature of 200ºC. Four glue sticks 7 x 100mm and 3 interchangeable metal nozzles are included in the set. The three Nozzles areRound - 1.84 mm IDRound - 1.93 mm IDFlat - 5.61mm wide x 1.05 Opening
For metal, wood, plastic, ceramics, cardboard, leather, polystyrene foams and textiles. Length 100mm. Colourless. Pack of 12
Compact heat gun for smaller jobs Two heat settings, 350° and 550° Strong case with soft grip and feet for stationary use Stainless steel nozzle and three additional push fit nozzles Perfect for small modelling or electronic tasks A nice compact heat gun for small jobs where a normal unit would be far too big or aggresive. The housing is made from glass fibre reinforced polyamide with soft grip and feet for stationary use. A powerful 500W element produces an even temperature in two stages, 350° and 550°, with a protection thermostat to prevent overheating. The nozzle is made from stainless steel, three push fit extra nozzles are provided, spot, fan and reflector. Perfect for shaping plastics, soldering and de-soldering electrical components or removing paint and varnish from small items. Specification for Proxxon MH 550 Micro Heat Gun: Air Flow: 180l/min Model: MH 550 Nett Weight:: 500g Power 500W Temperature: 350 & 550°
T-nut set for PRIMUS vices. 2 T-nuts, screws and the necessary accessories. For fixing to the drill tables of: BFB 2000, KT 150 and drill press TBH.
* Multipurpose Vices feature exact feed * For industry and demanding hobbists * Interchangeable hardened jaws, slotted vertically and horizontally * Both jaws are slotted at the top for gripping flat work pieces * Solid, cast iron base with CNC machined ways * Feed screw features a rolled thread for ease of movement * PRIMUS 100: 100mm jaw width, 75mm opening * PRIMUS 75: 75mm jaw width, 65mm opening Multipurpose Vices "PRIMUS" feature exact feed, ease of operation and accuracy. These vices are suitable for industry or the demanding home users. Fitted with interchangeable hardened jaws, slotted both vertically and horizontally, so either round or odd shaped objects may be clamped. Both jaws are slotted at the top, facilitating gripping of flat work pieces. The solid, cast iron base has CNC machined ways. The relatively high weight may allow use of the vice without fastening it down. The feed screw features a rolled thread which ensures ease of movement even with high axial loads. Option: Size option: 75mm (20392), 100mm (20402)
Quickly and securely clamps to work benches and tabletops up to 60 mm thick. Stands freely or can be fixed down. Rotates in all directions, including flush to the surface. 75 mm jaws with removable rubber covers. Zinc die-cast vice with ball and socket. Jaws also with vertical and horizontal V-slots. Max. clamping width 70mm. Weight 1.6 kg
