Transformers Accessories for Hand Held Proxon Tools

Engineering Menu > Proxxon 12v & 240v Precision Workshop Tools > Transformers Accessories for Hand Held Proxon Tools

Proxxon KT70 Micro Compound Table

ade of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm). Adjustable ruler eases workpiece positioning. Both handwheels have zero-resettable dials with graduations indicating 1 revolution = 1.0mm and 1 division = 0.05mm. X travel 134mm and Y travel 46mm having a maximum height of 43mm and table size of 200 x 70mm. Supplied with two step clamps and the clamps and securing bolts for the TBM bench drill.

Proxxon MICROMOT NG 5/E Mains Adaptor (Ref: 28704)

Variable speed control with feedback effect for optimum tool speed and high torque at low speeds. Three polarised sockets for Micromot machines. A pair of sockets for standard banana plugs (4mm diameter) is also supplied. Master switch for turning off the transformer without needing to unplug. Red LED indicates 'ready'. PTC (Positive-Temperature-Coefficient) elementprevents overload (and plugged-in tool will not restart automatically). After cooling down, the mains plug should briefly be unplugged to reset the adaptor. With storage holes for tools with 2.35mm and 3mm shafts. Foldable tool rest for the Micromot tool. Input Voltage: 240V Model: NG 5/E Output Voltage: 12V

£44.17 £53.00

Quantity:

People who bought this item also bought:

1. New Soba BA Tap & Die Set (Ref: EBAS2,)

2. Soba Miniature Woodworking Kit (Ref: 290125)

3. Proxxon 10 Piece HSS Twist Drill Set (Ref: 28874)

Proxxon MICROMOT NG 2/E Mains Adaptor (Ref: 28707)

MICROMOT mains adapter NG 2/E. NORYL casing (heat resistant - a necessity for transformer enclosures). Polarised socket for MICROMOT plug. Red LCD indicates readiness for use. PTC (Positive Temperature Coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter. With holes for storing bits. Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready. Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.

Technical data:
220 - 240V.
Supplies 2.0A at 16V open circuit and 12V under load.
Weight 1,000g.
Insulated to class 2 requirements.

£21.92 £26.30

Quantity:

People who bought this item also bought:

1. Proxxon Sanding Discs 28982 (Ref: 28982)

2. Proxxon Round Sanding Drums 28980 (Ref: 28980)

3. Proxxon 13 Piece Modeller's Set (Ref: 28910)

MICROMOT flexishaft 110/P (Ref: 28620)

Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine. Highly flexible core (does not run hot when working with tight radii). Length 100cm. For a maximum of 25,000rpm. Includes 6 steel collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm).

A truly flexible shaft some 1 metre long with delicate hand piece complete with six steel collets (ranging from 1mm to 3.2mm) for accurate holding of rotary tools and collet nut. Suitable for use with any of the Proxxon range of tools or indeed any type of power source that can grip the 3mm male shaft of the unit.

£25.90 £31.08

Quantity:

People who bought this item also bought:

1. Proxxon MICROMOT Keyless Chuck (Ref: 28941)

2. Proxxon IB/E Professional Mini Drill/Grinder - 240V (Ref: 28481)

3. Proxxon Holders for Bit & Cutter Storage (Ref: 28359)

Proxxon MICROMOT MB 140/S Drill Stand (Ref: 28606)

The 120 x 220mm milled table is fitted with a fence and a scale. The solid column is chrome plated and the headstock is of die-cast aluminium, offering a throat capacity of 140mm and 30mm travel. A chromed feed lever operates via a drive disc and ball-bearing system, offering a sensitive feed set-up. T-bars allow simple height adjustment as well as the fixing of the mill drill in the 20mm bore fitting. The mill drill collar, with scale, tilts through 90° in both directions. The drill stand features a depth stop as well as drilled, tapped holes for securing the KT 70 Compound Table. The MS 4 Machine Vice can also be fitted, it is made of die-cast zinc with three machined sides and horizontal and vertical V-slots in the jaws. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.

£40.00 £48.00

Quantity:

People who bought this item also bought:

1. Proxxon MS 4 Machine Vice (Ref: 28132)

2. Proxxon MICROMOT Protective Cover (Ref: 28944)

3. Footswitch FS (Ref: 28700)

Proxxon BV 2000 Drilling Device (Ref: 20002)

Preselectable drill depth using depth control with easily readable scale Articulated arm pivoted in two locations Flat-milled, solid base plate 200 x 200mm usable table area and 2 continuous T-slots 20mm system fit for precise clamping of drilling device A precise device for parallel drilling, thread-cutting and milling. Made in high-precision aluminium diecasting. With articulated arm pivoted in two locations. The device can be guided both sideways and vertically across the whole working area very precisely once clamped. It always remains vertically aligned. This means that any drill holes made are always precisely square to the workpiece surface!With 20mm system fit for precise clamping of drilling devices such as Precision Drill/Grinder FBS 240/E. Professional Drill/Grinder IB/E, Longneck Straight Drill/Grinder LB/E, MICROMOT 50, 50/E and 50/EF.An adjustable spring automatically pulls the device back into its top rest position after drilling. Preselectable drill depth using depth control with easily readable scale.Flat-milled, solid base plate with 200 x 200 mm usable table area and 2 continuous T-slots. Stable drill column (45mm diameter, 500mm long). Weight approx. 6kg. (Note: Professional drill/grinder IB/E and step clamps are not included in the package).

£164.58 £197.50

Quantity:

Footswitch FS (Ref: 28700)

For hands free precision work Connects to all machines with Euro plug, class 2 insulation Maximum power tool rating 500W Ideal for portable and stationary machines For hands free precision work and easy operation.The FS connects to all machines with a Euro plug, class 2 insulation and maximum power consumption of 500W. It is ideal for both portable and stationary machines. The housing is made from fibreglass reinforced NYLON. The mains (240V) cable is 2,500mm in length and the output cable is 500mm long. When using 12V MICROMOT tools the transformer is connected to the footswitch.

£14.17 £17.00

Quantity:

People who bought this item also bought:

1. Proxxon MICROMOT Protective Cover (Ref: 28944)

2. Proxxon MICROMOT KAVO Edge Milling Attachment (Ref: 28612)

3. Proxxon Tool Holder for Rotary Tools (Ref: 24098)

Proxxon MICROMOT KAVO Edge Milling Attachment (Ref: 28612)

The Proxxon KAVO edge milling attachment fits all MICROMOT tools with a 20mm collar. Used for chamfering and bevelling inside or outside edges of wood, plastic and metal workpieces. Also suitable for glass and ceramics when using a suitable cutter. A 20mm flange enables stationary use in conjunction with the UHV or UHZ universal holders. Cylindrical milling bits up to 10mm diameter can be used. Different shaped milling bits can create round edges, hollow edges, chamfers for seals etc. The angle can be adjusted for bevels from 30° to 60°. * For chamfering and beveling inside and outside of work pieces * Suitable for almost all materials, just use the correct milling cutter * Choice of angles between 30° and 60° * Can be used with UHZ or UHV stationary holders

£32.00 £38.40

Quantity:

People who bought this item also bought:

1. Proxxon MICROMOT Protective Cover (Ref: 28944)

2. Footswitch FS (Ref: 28700)

3. Proxxon MICROMOT MB 140/S Drill Stand (Ref: 28606)

Engineering Menu > Proxxon 12v & 240v Precision Workshop Tools > Transformers Accessories for Hand Held Proxon Tools