Clarke CL500M Lathe & Accessories

CLARKE 6 SPEED LATHE WITH 12 SPEED MILL DRILL - SORRY OUT OF STOCK  (Ref: CL500M)

REMEMBER OUR PRICE INCLUDES UK MAINLAND DELIVERY
This machine tool is superbly engineered for turning , milling and drilling. It is solidly constructed from cast iron and is amazingly keenly priceD. Features include- Power feed for screwcutting - Quick action clutch for independent lathe/mill drill operation- Fine feed adjustment on milling - Mill head rotates 360 deg - Capstan to raise/lower head - Mill/drill head includes 13mm drill chuck - Powerfull 3/4 hp 230v motor - No volt release switch. Chuck guards on lathe and mill/drill.

Lathe includes: Foward/reverse operation - 3 Jaw chuck - MT3 & MT4 centres - Spanners and wrench - Gear sets for screwcutting - Compound slide with 4 way toolpost - Machine Vice

Lathe Spec - Distance between centres - 430mm. Swing over bed - 305mm.Swing over crosslide - 172mm. Spindle bore 26mm. Spindle taper 4MT. Spindle speeds (6) - 170-1630 rpm. Screwcutting metric 14 (0.5-3mm pitch). Screwcutting imperial 20 (11-40tpi). Tailstock taper 3MT

Mill Drill Specifications- Drill capacity - 13mm Spindle column 175mm. Spindle nose- table - 150-320mm. Spindle bed - 212-382mm. Spindle stroke 92mm. Spindle Taper 3MT (with drawbar). Spindle speeds 12 (130-1660 rpm) Table 200x 150mm. T slots 12mm. Picture shows the machine mounted on the OPTIONAL floor stand/suds tray/ CLICK THE IMAGE FOR A LARGER PICTURE

SEE BELOW FOR OUR STARTER PACKAGE AND SAVE EVEN MORE!!

£771.00

£925.20

CLARKE 6 SPEED LATHE WITH 12 SPEED MILL DRILL STARTER PACKAGE  (Ref: CL500MSS)

AS ABOVE BUT INCLUDING!!
LIVE CENTRE
DRILL CHUCK AND ARBOR
SET OF 6 TURNING TOOLS
KNURLING TOOL
FLYCUTTER!!

£909.72

£1,091.66

CLARKE PROFESSIONAL 6 SPEED LATHE  (Ref: CL430)

This lathe is identical to the CL500M machine above except it is supplied without the nmilling attachment (please note this CANNOT be added later

Lathe includes: Foward/reverse operation - 3 Jaw chuck - MT3 & MT4 centres - Spanners and wrench - Gear sets for screwcutting - Compound slide with 4 way toolpost - Machine Vice

Lathe Spec - Distance between centres - 430mm. Swing over bed - 305mm.Swing over crosslide - 172mm. Spindle bore 26mm. Spindle taper 4MT. Spindle speeds (6) - 170-1630 rpm. Screwcutting metric 14 (0.5-3mm pitch). Screwcutting imperial 20 (11-40tpi). Tailstock taper 3MT


PICTURES SHOW OPTIONAL FLOOR STAND/SUDS TRAY

£645.00

£774.00

Floor Stand & Suds Tray for Clarke 500M & 430 Lathes  (Ref: 7610315..)

Lathe etc not inluded!!!

£169.95

£203.94

Fixed Steady for Clarke 500M & 430 Lathes  (Ref: 7610317..)

Travelling Steady for Clarke 500M & 430 Lathes  (Ref: 7610318..)