Engineering Menu > Proxxon 12v & 240v Precision Workshop Tools > Proxxon Table Top Tools & Accessories
Machined worktop of high quality, ribbed die cast aluminium (220 x 120mm). Adjustable fence with scale. Solid, hard-chromed steel column, 280 high x 20mm diameter. Super stable die-cast head with VDE approved 240V, 85W motor. Power transmission by aluminium pulleys and flat belt. Three spindle speeds of 1,800, 4,700 and 8,500 rpm. Chrome feed lever with adjustable depth scale. The spindle is supported by 3 high quality sealed bearings. Recessed spindle for insertion of MICROMOT steel collets but also threaded for drill chucks 3/8" thread. Extremely high rotational accuracy, 30mm feed. Quill diameter 32mm, with return spring. Throat depth, column to drill spindle, 140mm. Quick coarse height adjustment of headstock with clamp levers. Maximum height 140mm. Supplied with six triple slit precision collets (1.0, 1.5, 2.0, 2.4, 3.0, 3.2mm). Specification for Proxxon TBM 220 Bench Drill: Chuck Travel: 30mm Collets Supplied: 1.0, 1.5, 2.0, 2.4, 3.0 & 3.2mm Diameter of Column: 20mm Model: TBM 220 Nett Weight: 3.3kg Power:85W Speed:1,800, 4,700 & 8,500rpm
For drill shank sizes 0.5 to 6.0mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8" thread for MICROMOT bench drill TBM 220.
For engraving letters and numbers in metal or plastic (name plates, jewellery or other valuable objects). A practical accessory for the MICRO Miller MF 70. For fitting instead of the MICRO Compound table. Also for engraving and cutting out freely selectable shapes using self-made templates. With precise letter templates which are fixed in the guide rails provided. The workplace is aligned and fixed on the movable guide block using clamping jaws or a vice. Template contours can be precisely followed using the guide marker (ball handle). The lettering to be milled is transferred scaled down. The transfer ratio can be set to 2:1, 3:1, 4:1 or 5:1 by simple adjustment of two screws. A maximum 14 of the letters supplied fit next to each other in the guide bar (template holder). It is also equally easy to manufacture miniature, individual shapes, engravings, cutouts and outline shapes, even in series, using self-made templates or commercially available templates (plants, animals, coats of arms). Two sets of letters from A to Z, full stop and hyphen (total 52 items), two sets of figures from 0 to 9 (20 items), fixing screws for the MF 70 base and an extensive instruction manual are included in delivery.Note: The step clamps shown here are included in delivery with the MF 70.
For forming thin lines and engraving fine-lined letters. Also for scribing printed circuit boards for later breaking out.
Engraving stylus For V-shaped letters. Letter width at base 0.5mm.
This is a super little machine, well suited to modelling work and for the manufacture of small precision components in a variety of materials. The extruded aluminium compound table has low backlash leadscrews and adjustable gib plates for smooth, accurate movement. Supplied complete with a set of six collets of 1.0mm, 1.5mm, 2.0mm, 2.4mm, 3.0mm, 3.2mm diameter and a work clamping kit. An optional set of solid carbide cutters is available, sizes 1.0mm, 2.0mm and 3.0mm.
Maximum depth of cut 22mm Tilting arbor Die-cast aluminium table top Extendable work support Variable blade speed 80mm 24T TCT saw blade 34mm diameter dust outlet Supplied with mitre fence and rip fence A fine modelling saw with a maximum depth of cut of 22mm and the facility to tilt the arbor up to 45° for mitred and compound cuts. The table top is very solidly made from die-cast aluminium and measures 295 x 240mm with an extendable work support which pulls out from the left hand side, increasing the width to 500mm. The blade speed can be varied from 4,400 to 6,800rpm with the electronic feedback system giving a degree of constant speed control which gives an improved quality of cut. Fitted as standard with an 80mm diameter 24T TCT saw blade, perfect for high specification modelling work. 34mm diameter dust outlet. Specification for Proxxon FKS/E Table Saw: Blade Dia/Bore: 80mm/10mm Dust Extraction Outlet: 34mm Max Depth of Cut: 22mm Model: FKS/E Nett Weight: 5.2kg Power: 200W Speed: 4,400-6,800rpm Table Size: 295 x 240mm
Solid, ribbed die-cast aluminium housing Double ball bearing aluminium pulleys Sturdy 200 x 200mm machined table with slot for mitre gauge Table tilts to 45° for accurate mitre sawing Low noise 240 Volt motor Electronic speed is control Standard equipment includes 1,065 x 5.0 x 0.4 mm (14 TPI) band saw blade The MBS 240/E has a solid, ribbed die-cast aluminium housing and features double ball bearing aluminium pulleys. Its sturdy, machined table with slot for mitre gauge as well as an optional coolant trough measures a generous 200 x 200mm. The table tilts through 45° for accurate mitre sawing. The machine is powered by a low noise 240 Volt motor (high quality, for quiet, prolonged use) with toothed belt drive. The speed is controlled electronically for exceptionally accurate cutting. A clear table indicates the recommended speed for most materials. The blade size (5.0 x 0.4 mm) is ideal for fine work, allowing cutting of small radii. Standard equipment includes one 1,065 x 5.0 x 0.4 mm (14 TPI) band saw blade. A diamond blade is available for cutting glass and ceramics, this must be used in conjunction with the coolant system and coolant collection tray. Blade Length 1,065mm Blade Speed 120 ~ 250 m/min Blade Width Min/Max 5mm Dust Extraction Outlet: Yes Max Depth of Cut: 85mm Max Width of Cut: 150mm Model: MBS 240/E Nett Weight: 7.5kg Overall: L x W x H 510 x 432 x 330mm Table Size: 200 x 200mm Table Tilt: 0° - 45°
Bandsaw blades and accessories to fit Proxxon MBS Bandsaws. 28172 Bi-metallic band saw blade for MICRO Band Saw MBS 240/E. Carrier band in alloyed heat-treated steel. Saw teeth, however, made of hard-wearing HSS. For cutting all standard steel types, non-ferrous metals and stainless steel. 1067 x 6.0 x 0.6mm.
Bandsaw blades and accessories to fit Proxxon MBS Bandsaws. 28174 Swedish steel (1,065 x 5.0 x 0.6mm). Fine-toothed (24 TPI). For steel and brass.
Bandsaw blades and accessories to fit Proxxon MBS Bandsaws. 28176 Coarse-toothed (14 TPI). For wood and plastics.
Bandsaw blades and accessories to fit Proxxon MBS Bandsaws. 28180 For aluminium and plastic. As above, but special tempered steel, with induction hardened teeth. Extra narrow for tight curves (1,065 x 3.5 x 0.4mm).Coarse-toothed (14 TPI).
Bandsaw blades and accessories to fit Proxxon MBS Bandsaws. 28187 Blade Guides. Triple ball bearing system with feed pipe for coolant when used with the diamond blade. Can also be used in conjunction with normal blades.
For use with the MBS240/E Micro bandsaw when using a diamond blade to cut glass or ceramics. Made of plastic, with stop cock and regulator, 100cm tubing as well as 2 nipples for the MBS240/E table and mounting bracket (incl. screws). Holds 1 litre.
Size 420 x 310 x 15mm. Includes gasket for sealing the fixing holes of the machine. With 50cm discharge tube and nipple for the band saw table. The tray is not drilled and may be used on other machines too.
Self contained unit using miniature router cutters Designed to produce small detailed profiles used in dolls house and model making projects Head is fully adjustable within a cutter guard c/w Adjustable fence, mitre fence, 2.4, 3 & 3.2mm collets and tools A cross between a router table and moulder / shaper in miniature. This machine is a self contained unit using miniature router cutters, held in the collets 2.4, 3, and 3.2mm, to produce small detailed profiles used in dolls house, model making projects and similar precision work. Powered by a long life 100W motor achieving 25,000rpm no load speed. The head is fully adjustable within a cutter guard / hold down, the incremental adjustment can be zeroed with one revolution equalling 1.00mm in height and one division on the scale equalling 0.05mm in height. Measuring 300 x 150mm the table is a generous well made surface supporting a full length parallel fence and slotted for the mitre fence or any jigs or sub-tables you might want to traverse across the cutter. Dust extraction is essential with this unit via the 37mm outlet provided and which is suitable for connection to a standard vacuum cleaner. Specification for Proxxon MT 300 Micro Shaper: Dust Extraction Outlet: 37mm Model: MT 300 Nett Weight: 2.0kg Power: 100W Speed: 25,000rpm Table Size: 300 x 150mm
Tungsten carbide wood router cutters. For cutting hard wood, fibreboard and plastic. Clean relief grinding for good work results and surface quality. High stability. For manufacturing slots, sections, radii and other profiles. For crafting picture frames. Shafts 3.2mm. Neatly packed in wooden box. Slot cutter: Diameter 3.2mm (29024) Slot cutter: Diameter 5.0mm (29026) Slot cutter: Diameter 6.5mm (29028) Rounding over cutter: Diameter 6.4mm (29030) V-slot cutter: Diameter 6.5mm (29032) Combi cutter: 6.5/2.5mm (29034) Core box bit: 3.2mm radius (29036) Rebating cutter: 6.4mm (29038) Edge cutter with pin: Diameter 5.0mm (29040) Half round cutter: Diameter 13mm (29042)
Molybdenum-chrome Vanadium steel router bits with 3.2mm shanks. A range consisting of: 3.2mm, 5mm, 6.5mm straight, 3.2mm radius veining, 3mm radius beading, 6.5mm vee groove, 2.4mm guided beading, 3.2mm guided beading, 4.8mm guided cove and 3.3mm guided rebate cutter. Also available as individual items.
Supplied with 5 coarse and fine saw blades Free-swinging saw blade holder for standard and pin less blades Bellows with adjustable air nozzle Rotary knob for basic adjustment of saw blade tension Housing base made of cast steel A two speed fretsaw and a great a tool for model building and other fine detailed work. Fitted with a saw blade holder that takes both standard and pinless saw blades. The saw arm and the bellows with an adjustable nozzle, provide an unobstructed view of the work. The 2 parallel swinging saw arms, made of die cast aluminium with ball-bearing direct drive, are adjusted by a rotary knob for basic adjustment of saw blade tension. The 360mm x 180mm main table can be tilted for mitre cuts up to 45°. It is powered by a special motor with electronic stroke regulation and constant speed even under load. Supplied with 5 coarse and fine saw blades. Specification for Proxxon DSH 2 Speed Fretsaw: Max Depth of Cut: 50mm Max Depth of Cut: @ 45deg 25mm Max Depth of Cut: @ 90deg 50mm Model: DSH/2 Nett Weight: 20kg Overall: L x W x H 530 x 270 x 300mm Power: 205W Table Size: 360 x 180mm Table Tilt: 0-45° CUTS 990 OR 1500 CUTS PER MINUTE
For cutting soft and hard woods, plastics, Perspex, soft non-ferrous metals. (6 blades) Coarse toothed blades (14 TPI) - 28110 130 x 1.50 x 0.48 mm Normal toothed blades (17 TPI) - 28108 130 x 1.20 x 0.38 mm Fine toothed blades (25 TPI) - 28107 130 x 0.77 x 0.30 mm Blade Courseness: Coarse toothed blades (14 TPI) 28110, Normal toothed blades (17 TPI) 28108, Fine toothed blades (25 TPI) 28107
Hard and soft woods, plastic, Perspex and soft non-ferrous metal. Standard-toothed blades (17 teeth per 25mm) 28108 130 x 1.20 x 0.38 mm Coarse-toothed blades (14 teeth per 25mm) 28110 130 x 1.50 x 0.48 mm Fine-toothed blades (25 teeth per 25mm) 28107 130 x 0.77 x 0.30 mm Hard materials such as steel and PERTINAX. Fine-toothed blades (28 teeth per 25mm) 28104 130 x 1.10 x 0.50 mm Very fine-toothed blades (41 teeth per 25mm) 28106 130 x 0.74 x 0.36 mm Blade: 28108, 28110, 28107, 28104, 28106
These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces). A 1.5mm hole is required. Ideal for plastic, hard and soft woods.
WITH FREE TCT BLADE WORTH OVER £25.00For precise cuts with a height-adjustable and tilting saw blade Milled die-cast aluminium table Table and drive can be lifted up for easy access for cleaning or blade changing Micro-adjustable cut length stop for cuts as small as 0.1mm The sawblade tilts up to 45° Special DC motor with Optibelt toothed belts Supplied with 80mm x 24 sawblade Push stick and zero tolerance POLYCARBONATE table inset Dust adaptor for connection to a vacuum A saw designed for precise, straight cuts, with a height adjustable and tilting saw blade, up to 45 degrees. It is made for the fine mechanic, model builder, mould making, toy manufacture, architect, model carpenter and fitter. A variety of optional blades allow it to cut a wide range of materials, such as wood, non-ferrous metals, plastics, Plexiglas, PC-cards, foam and many others. All the load bearing parts and plane-milled table are made of die cast aluminium making the FET saw very stable.The table and drive lift for easy access for cleaning or changing the saw blade. The micro-adjustable, precise cut length stop allows cuts as small as 0.1mm to be made. The sawblade, with can be pivoted by 45°, makes the cutting of double mitres possible when used with the angle stop. The FET is driven by a special DC motor with Optibelt toothed belts connecting it the main ball bearing supported shaft. Standard equipment supplied with the saw includes a 24 tooth hard metal-equipped sawblade 80 x 1.5 x 10mm. A push stick and a non-slotted POLYCARBONATE sawing table inset for tight tolerances between sawblade and table when cutting small parts. The FET has a dust adaptor suitable for connection to a vacuum for dust free working. Specification for Proxxon FET Table Saw: Blade Dia/Bore 50 to 80mm/10mm Blade Tilt: 0° - 45° Dust Extraction Outlet: Yes Max Depth of Cut @ 90deg: 22mm Model: FET Nett Weight: 6kg Table Size: 300 x 300mm
Designed with model making and fine detail work in mind, this lightweight fret saw 'ticks all the boxes' in the 'must have' list. Accurate, easy to use, variable speed, blade wear compensation / length adjustment, adjustable blade guide / hold-down, integral dust blower, dust extraction port. A surprisingly robust and generous table (160 x 160mm) is fitted with a calibrated rip fence and slide mitre fence, this surmounts a sturdy ABS base with a side door for easy access to the bottom blade clamp assembly, the whole supports the die cast aluminium saw frame with a throat of 300mm and a simple but very effective tensioning head with integrated blower. Takes standard unpinned fretsaw blades.
85 mm Dia x 0.5 x 10 mm80 Teeth- Use on hard and soft woods and plastic
80 mm Dia x 1.6 x 10mm36 Teeth- Use to cut balsa , plywood , hard & soft woods , Polycarbonate , plastic , aluminium and PC cards.
Electronic speed control 250 - 750rpm Includes chart for recommended speeds on different materials Main body of ribbed die-cast aluminium Aluminium extrusion table with a precise T slot Table tilts 15° inwards & 45° outwards Disc diameter 250mm. Dust collection adaptor included Supplied with mitre fence and 2 each sanding discs of 100 grit and 240 grit A fine, accurate disc sander with variable electronic speed control from 250 to 750rpm. Also suitable for wet sanding using the optional attachment. Sands long edges, end sections, radii, mitres and by turning work piece over - accurate flat surfaces at right angles. Used on soft and hard woods, non-ferrous metals, steel, plastics (Plexiglass and fibreglass), cork and rubber. Includes chart for recommended speeds on different materials. Main body made from ribbed die-cast aluminium. The table is made from an aluminium extrusion profile with an accurate T slot to precisely guide the mitre fence. It also tilts 15° inwards and 45° outwards (a scale facilitates accurate adjustment). The 250mm machined backing disc is driven by a twin ball bearing spindle. Standard, commercially available sanding discs fix firmly and can be replaced quickly. A dust collection adapter for attaching a vacuum cleaner/dust extractor is included. 220 - 240V with drive via toothed belt (reduction ratio 7.3:1). Maximum sanding height 135mm, table 275 x 105mm. Suppled with a mitre fence and 2 each sanding discs of 100grit and 240grit. Overall size without table 330 x 280 x 230mm. Specification for Proxxon TG 250/E Disc Sander: Diameter of Disc: 250mm Dust Extraction Outlet: Yes Model:: TG 250/E Overall L x W x H 330 x 280 x 230mm Speed: 250 - 750rpm Table Size: 275 x 105mm Table Tilt: 15° - 0° - 45°
Integrated clamping fixture Base plate can revolve up to 45° L & R Cuts up to 65mm wide or 25mm round The lower part of the motor unit and the base plate is made of sturdy die cast aluminium with CNC milled guides. The base plate is surface milled and fitted with an integral vice to ensure work pieces are held firmly and securely for maximum cutting accuracy. The vice cheeks are provided with V-groove (for round parts) and with groove for clamping thin workpieces up to 65 mm wide. The compact, tight and torsion-free design allows clean and safe cutting of workpieces up to 65mm wide and 25mm thick as well as round material up to a max. diameter of 25mm. The base plate, rotates through 45° left and right and is notched 15° steps, the base can also be locked for intermediate angles. The KGS80 is supplied with a carbide tipped saw blade for wood, non-ferrous metals and plastic with 24 teeth ( 80 x 1.6 x 10 mm). Specification for Proxxon KGS 80 Chop Saw: Blade Speed: 4,000rpm Max Depth of Cut: 25mm Model: KGS80 Nett Weight: 1.5kg Power: 200W
Key FeaturesVariable speedBlade wear compensationIntegral dust blower and dust extraction portc/w calibrated rip fence and slide mitre fenceDesigned with model making and fine detail work in mind, this lightweight fret saw 'ticks all the boxes' in the 'must have' list. Accurate, easy to use, variable speed, blade wear compensation / length adjustment, adjustable blade guide / hold-down, integral dust blower, dust extraction port. A surprisingly robust and generous table (160 x 160mm) is fitted with a calibrated rip fence and slide mitre fence, this surmounts a sturdy ABS base with a side door for easy access to the bottom blade clamp assembly, the whole supports the die-cast aluminium saw frame with a throat of 300mm and a simple but very effective tensioning head with integrated blower. Takes standard unpinned fretsaw blades.Max Depth of Cut 40mm (soft wood)Model DS230ENett Weight 3.0kgPower 85WTable Size 160 x 160mm
Tungsten Carbide Blade 80 mm dia x 1.6 mm x 10 mm24 teethUse on Aluminium , hard wood , laminates , plastics
85 mm dia x 0.7 x 10mmUse on stone and tiles
Cutting disc with reinforcement 80 x 1.0 x 10mm Corundum compound, used for cutting steel, non-ferrous metal, plastic & wood.
SPECIAL OFFER High quality 2 speed fretsaw with many unique features Magnesium arms for lower vibration and noise Table slides back for easy blade changing Fine table tilt adjustment for precise bevel cutting Patented blade clamps for true blade alignment Blower nozzle and dust extraction port provided This is a high quality, two speed fretsaw that has several outstanding design features that make it a pleasure to use. The arms are made from magnesium to reduce the moving weight by 40%, ensuring extremely low vibration and quiet running. They run on precision bearings and are very slender to allow a clear view of the work. The table slides back 80mm to make blade changing easier. It also tilts between -5° and +50° with five position stops, and has a fine adjustment system to control the table tilt. Patented blade clamps ensure true blade alignment and the saw can use both pinned and pinless blades. The large throat of 460mm is coupled with a cutting depth of up to 60mm in wood or 10-15mm in non-ferrous metals. It also easily cuts Plexiglas, GRP, foam, rubber, leather or cork. A rigid cast iron base ensures stability whilst the die cast alloy table is finely machined for flatness. A 205W brushless motor is powerful and controlled electronically to provide even running whilst under load. An adjustable chip blower and built in extraction connector allow clean working. Supplied with 5 coarse and fine saw blades. Specification for Proxxon DS 460 2 Speed Fretsaw: Cuts per Minute: 900/1,400 Max Depth of Cut: 60mm Model: DS 460 Nett Weight: 20kg Power: 205W Table Size: 400 x 250mm Table Tilt: -5° to +50°
Height adjustment easily altered with headstock lock lever Table features ribbed base and milled work area with T-slots Permanent magnet motor Three speeds 1,080, 2,400 & 4,500rpm The height adjustment is easily altered by means of the headstock lock lever. The table features a ribbed base and milled work area with T-slots. The column is bright nickel-plated. Powerful, long life 240V permanent magnet motor. The quill is driven via a belt and three step pulleys. This yields a torque multiplication of as much as 6x at the lowest speed. Geared quill feed for exact operations runs in ball bearings. Spindle with 1/2"' thread accepts the standard chuck, as well as the optional collets (2.35, 3, 3.2, 4, 5 & 6mm & collet nut). Specification for Proxxon TBH Bench Drill: Chuck Travel: 63mm Diameter of Column: 45mm Model: TBH Nett Weight: 10kg Power: 300W Speed: 1,080, 2,400 and 4,500 rpm Table Size: 200 x 200 mm
Collet set for drill press TBH. Triple slit and hardened. 1 each of 2.35 - 3.0 - 3.2 - 4.0 - 5.0 and 6.0 mm. With collet closure nut (M 17) Neatly packed in wooden box with sliding lid.
Very high accuracy and vibration free running Able to carry out horizontal drilling or machining Compound table gives precision work piece control Superb motor control allows the cutting tool to work effectively Very versatile, the ultimate machine for model making The Complete Mill/Drill System is great value. The complete system consists of: BFW 40/E Mill/Drill Motor and Controller, BFB 2000 Mill/Drill Stand, KT 150 Compound Table & Step Clamp Set. The BFW40/E drill head with its triple bearing spindle giving superb accuracy and vibration free operation. The power controller gives spindle speeds from 900-6000rpm with full torque control. A set of 6, triple slit, hardened collets from 2.3-6mm is supplied.The BFB 2000 Drill Stand has a precision milled dovetail slide which may be tilted through 90 degrees, a fine feed selector, depth gauge and rack and pinion down feed. This stand will take all drills and routers with a 43mm spindle collar.The KT 150 aluminium die cast compound table has a travel of 150mm both ways, graduations of 0.05mm and 3 machined T slots for fastening machine vices and clamps. Suitable for milling, routing or slotting of steel, non-ferrous metals, plastics and wood.The Step Clamp Set is a 2 clamp set which fits the KT 150 table directly and is ideal to hold the work piece securely in place.For precision work this Proxxon Mill Drill kit would be very hard to beat, made in Europe by the most respected name in model making equipment.
High strength precision die-cast aluminium Mill/Drill Stand, with precision milled dovetail slides. Head with precision milled dovetail slide and may be tilted through 90° to give all-round versatility: diagonal drilling, versatile without need of special milling bits, milling diagonal slots. Fine feed selectable, allowing fine head feed for milling. With dial and depth scale. Geared rack and pinion feed for effortless drilling. 45mm diameter drill column, 500mm long. Approx. 140mm throat (column outside to tool centre). 65mm stroke. Machined, solid base plate approx. 200 x 200mm. All drills with standard 43mm spindle collars may be utilised directly: BOSCH, AEG, FEIN, METABO, KRESS, BLACK & DECKER, SKIL.
With precision milled dovetail slides, thus also suitable for metal work. For routing, milling, slotting of steel, non-ferrous metal, plastic and wood. Each slide provided with locking screws. Dovetail fittings/gib strips adjustable to eliminate play. Feed adjustments by means of 2 handwheels with adjustable, graduated dials (one revolution = 2mm, one graduation = 0.05mm). Machined table, 3 T-slots for fastening machine vices and clamping kits. Fence supplied with pre-drilled positioning holes, including 45°, fastening screws and clamp used for routing. Table 200 x 200mm. Maximum travel 150 x 150mm. Overall height 75mm. Weight 4.9kg
* Easily installed * 1 revolution = 1.5mm, travel, 1 division = 0.05mm * Graduated scale may be reset to zero Easily installed. The feed may now be used via either the height feed (vertical) or the fine feed in the tilted position. One revolution = 1.5mm spindle travel, one division = 0.05mm. The graduated scale may be reset to zero.
Set includes column (35 x 400mm), mounting bracket and bolts. The mounting position on the PD230/E is already milled. The lathe's top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 6mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the micro FF230. Three collets of sizes 6,8 and 10mm are included.
* For accurate use on round components * Concentric accuracy better than 0.2mm * 8 collets: 2.0, 3.0, 4.0, 5.0, 6.0, 8.0 & 10mm * Supplied in a wooden box with sliding lid For accurate use on round components. The collets are mounted in the place of the headstock chuck. Eight collets one each, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 & 10mm are included. Supplied in a wooden box with sliding lid.
* Used to drill off-set holes & to mill off-set slots, rectangles, hex shapes, etc. * Scale on the housing enables high accuracy divisions * Chuck with reversible jaws * Clamps 1.5 - 32mm internal & 12 - 65mm external * 11 mm bore allows the passage of longer work pieces when used in the horizontal position * Fixng holes for horizontal & vertical assembly * Suitable sliding blocks & fixation screws for assembly to MICRO Miller MF 70 & Compound Table KT 70 * Supplied in wooden box with sliding lid This Dividing Head can be used to drill off-set holes and to mill off-set slots, rectangles, hex shapes, etc. A scale on the housing enables high accuracy divisions. It includes a chuck with reversible jaws, which is able to clamp 1.5 - 32mm internally and 12 - 65mm externally. The 11mm bore allows the passage of longer workpieces when it is used in the horizontal position. It features fixing holes for horizontal & vertical assembly. Suitable for use with the Proxxon MICRO Miller MF 70 and Compound Table KT 70. Size 72 x 64 x 38mm, supplied in wooden box with sliding lid.
4 Endmills6 - 7 -8 and 10 mm
* A very accurate European made machine * Powerful, quiet and shock-free condenser motor (400W) * Solid column with dovetail slideway * Poly-V belt drive for 6 spindle speeds between 180 and 2,500rpm * Plane-milled table in steel (400 x 125mm) with three T-slots * Handwheels with adjustable scale ring 1 rev. = 2.0mm, 1 coarse division = 0.1mm, 1 fine division = 0.02mm Quiet, good looking and multifunctional. For accuracies of up to 0.05 mm. A machining centre for milling, drilling and countersinking which has yet to be equalled. Made in Europe.Milling head can be pivoted by 360° (with degree graduation). Preset rotational speed by simple moving of Poly V-belt. Sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm).Workpiece fixing using 6 - 8 - 10 and 12mm chucks (included in delivery). Extension height adjustment using hand wheel with scale ring (1 turn = 2mm). Solid, plane-milled compound table in steel with three continuous T-slots for size 8 standard T-nuts.Technical data: 220 - 240V. 400W. 50/60Hz. Spindle speeds 180, 350, 550, 800, 1,300 and 2,500rpm. Extension (to spindle centre) 100mm. Column 120 x 100 x 420mm. Table 400 x 125mm. Traverse range vertical (z-axis) 220mm, transverse (x-axis) 310mm, depth (y-axis) 100mm. Total height 780mm. Weight approx. 47kg. Specification for Proxxon FF 500 MICRO Mill: Technical data: 220 - 240V. 400W. 50/60Hz. Spindle speeds 180 - 350 - 550 - 880 - 1300 and 2500rpm. Throat (to spindle centre) 125mm. Column (120 x 100 x 420mm) of aluminium continuous casting, intricately ribbed for greatest rigidity. Table 400 x 125mm. Traverse range vertical (z-axis) 220mm, transverse (x-axis) 310mm, depth (y-axis) 100mm. Total height max. 780mm. Weight approx. 47kg. Note: The MICRO miller FF 500 is also available as FF 500/CNC with CNC control of 3 tool axes, including recirculating ball spindles, step motors and user-friendly WINDOWS-compatible software.
FF 500 with CNC control! Precision and repeat accuracy for individual parts and small series. * With recirculating ball spindles on all three axis and three powerful * Stepper motors for driving the milling table and milling head. * Large traverse paths: X-axis: approx. 310mm, Y-axis: approx. * 100mm, Z-axis: approx. 220mm. * Super-stable column with dovetail slideway. * Including user-friendly software. Runs under WINDOWS® * Including control unit for connecting to PC or laptop. Precise work with high repeat accuracy. A wide range of uses for single part and small series production. Machining of steel and non-ferrous metals is possible in all dimensions thanks to CNC control of 3 tool axes. This also applies to larger workpieces.Axes X, Y and Z with recirculating ball spindles (no backlash) and powerful stepper motors. Apart from this, the mechanical construction is almost identical with the MICRO Miller FF 500 available as a manually operated machine. A solid, flat-milled compound table in steel with 3 continuous T slots for size 8 standard T-nuts. The base is constructed in vibration-damping cast steel. A stable column with dovetail slideway. Swivel-mounted milling head with powerful, quiet and free running condenser motor. Poly V-belt drive for 6 spindle speeds. Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). This can be clamped using a tommy screw when CNC milling. Cutting tool fixing using a chuck. Complete with CNC control unit, CNC programme software, all connecting cables, 6 , 8 , 10 and 12mm chucks and detailed manual. Quiet, good-looking and multifunctional. For repeat accuracies of up to 0.05mm. A machining centre for milling, drilling and countersinking which has yet to be equalled. Made in Europe! Technical data: Power supply 220 - 240V / 50/60Hz Drive condenser motor with 400W Spindle drive X-axis Recirculating ball spindle with 4.0mm inclination, flank diameter 12mm. Step motor with 2.2A und 1.27Nm dwell moment; travel distance: approx. 290mm Spindle drive Y-axis Recirculating ball spindle with 4.0mm inclination, flank diameter 12mm. Step motor with 2.2A and 1.27Nm dwell moment; travel distance: approx. 100mm Spindle drive Z-axis Recirculating ball spindle with 4.0mm inclination, flank diameter 12mm. Step motor with 2.2A and 1.27Nm dwell moment; travel distance: approx. 220mm 6 spindle revolutions 180 - 350 - 550 - 800 - 1,300 - 2,500/min Selectable by placing drive belt. Control of step motors via CNC control unit (included in scope of delivery) Software on CD-ROM, installation under Windows 98, Windows 2000 and Windows XP Drive connection via RS 232 interface (or: use of a USB adapter), connecting cables to PC included in scope of delivery Sizes Machine: work table 370 x 350mm, table 400 x 125mm, total height approx. 780mm Control unit: L 450 x W 270 x H 60 mm Total weight Machine: approx. 50kg / Control unit: approx. 4kg PROXXON CAD/CAM software for WINDOWS® Brief description of software and hardware: The software is harmonized with mechanics, motors and the control unit of the CNC machine, thus offering the optimum performance. The CNC control unit controls the step motors of the machine. The PC software provides the machine with the geometry information for travel of the tools (via RS 232 interface). This means that the control unit is the interface between software and the mechanics of the machine. Powerful micro processors and accordingly dimensioned step motors and phases ensure that the motors always provide enough power for any machining processes. Two freely usable output relays in the casing of the control unit provide facilities for control of additional functions, e.g. a working lamp. Including connection cables with suitable plugs and built-in power supply for connection to 220 - 240V. Simple creation of work piece geometry The CAD window is displayed when the programme starts. The work piece contour is created in the familiar WINDOWS® environment. Numerous auxiliary aids help during programme operation, which supports both coordinate entry (absolute and relative) in addition to mouse use. Read-in of existing files in standard file formats (e.g. .dxf or .hpgl) is possible. Technology information is allocated to every drawing element. This makes, for example, different processing speeds and manual tool replacement possible. Automatic generation of CAM data The finished drawing of the tool is converted, by a mouse click, into the instruction set for the machine. So, machining can be started immediately. The instruction set generated in this way is in accordance with DIN/ISO 66025 and can be manually edited and exported. Conversely, the system also permits importing or complete self writing of data sets. CNC simulation If requested, the travel distances of the tool are simulated in the graphic window. In this way, faults in the programming can be recognised in time. Manual work The handwheels are replaced with the step motors of the CNC machine. Nevertheless, manual machining is possible with the help of cursor buttons, since the step motors can be operated manually. Software installation The PC software is supplied on a CD ROM. The problem-free installation is effected automatically under Windows®.
The step clamps set is supplied with the KT 70, but can also be ordered separately. Set consists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard (11.5 x 11 x 4mm) and bolts. This set also fits the lathes PD 230/E and PD 400.
Precision steel vice PM 40. Milled from steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for filigree and accurate working with the MICRO miller MF 70 or the MICRO compound table KT 70. Sliding blocks and fixing screws included. Comes in a wooden box.
Usable on materials such as steel, brass, aluminium and plastic. Complete with automatic feed, thread cutting capability, headstock chuck, live centre and top slide for taper turning. Used to part, machine stock and cut tapers. The numerous optional accessories allow one to drill, mill and slot. Technical data: Centre distance of 230mm, swing 52mm. Height over cross slide 28mm. Cross slide travel 60mm and top slide 45mm. Steel tool holder accepts 8 x 8mm cutters. The MK1 (short) spindle has a 10.5mm bore. It runs in precision ball bearings, yielding an accuracy of 0.01mm without chuck. The thread cutting capability covers the most important pitches of 0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1.0 - 1.25 and 1.5mm. Spindle speeds are changed by means of a belt and offer 300 - 900 and 3,000rpm. The electronic speed control further extends the speed range down from 100rpm (which is important when cutting threads) to 3,000rpm. The automatic feed offers 0.05 or 0.1mm per revolution. The tailstock spindle has a MK1 (short) bore and 30mm travel. The quiet 220 - 240V motor is fitted with a forward/reverse switch. The three jaw chuck offers 2 - 35mm capacity (internal jaws) and 24 - 68mm (external jaws). The handwheels are fitted with zero adjustable scales. One revolution equals 1mm feed (40 divisions) and hence 0.05mm/division. Weight approx. 10kg and dimensions approx. 530 x 250 x 150mm. Cross Slide Travel: 60mm Distance Between Centres: 230mm Height Over Cross Slide:: 28mm Model PD 230/E Nett Weight: 13.55kg Power:150W Speed Range: 6/ 80 - 2,800rpm
Cutters for internal threads (60° & 55°) 3 boring bars and holder Fits PD 230/E or PD 400 lathe Shank diameter 6mm Supplied in wooden box This six piece set is supplied in a wooden box. It comprises one of each cutter for 60° (metric threads) and 55° (Whitworth threads), for cutting internal threads, 1.3mm, 2.65mm and 4mm boring bars and a tool holder. The shank diameter is 6mm and length 95mm. These cutters are held in a tool holder that mounts to the tool post of either the PD 230/E or PD 400 lathe.
Made from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front and back allow slight cleaning. Mounting hole and raised base to secure lathe are pre-drilled. Length 495mm, width 215mm, height 150mm.
Quick change tool post for PD 230/E Easy to use!. Enables quick tool changes and easy height adjustments. Including 2 tool holders for lathe tools up to 10 x 10mm.
Independently adjusted jaws For clamping unsymmetrical pieces, ovals, squares and odd-shaped work pieces 80mm capacity. The 4 jaws are adjusted independently, thus clamping asymmetrical pieces, ovals, squares and odd shaped workpieces. 80mm capacity.
Used for highest accuracy with high rotational precision. One face plate, 2 fixed MK 1 (short) centres and 1 drive dog are included. Supplied in wooden box with sliding lid.
Fixed steady. Used when turning long, slender pieces, capacity up to 40mm (Ø). Also used when the tailstock cannot be utilised.
Supplied with change gears for thread cutting in 19 steps (0,2 - 3,0mm) Main switch with emergency stop function and restart protection. Quality, precision 3 jaw chuck with 100mm capacity. Powerful capacitor motor with 550W output. Quick-Change tool post with 2 holders (fitted with adjustable height and stop). Includes 2MT rotating centre in tailstock Easy to use hand wheel of aluminium with adjustable scale of steel. 1 division = 0.05mm Fully enclosed leadscrew with Acme thread (12 x 1.5) Cross-braced cast iron bed with wide, ground slide ways Handwheel for quick support change Switch for clockwise, off and counter-clockwise rotation Selector for auto feed Offers precision and versatility. Complete with 3 jaw chuck, live centre and thread cutting capability.The PD 400 lathe is unequalled in its class. Ideal for straight and cross cuts, taper turning, internal and external thread cutting slotting etc. Usable on materials such as steel, non-ferrous metals (aluminium, brass etc.). Negligible variances even under heavy loads. Ground and hardened beds of ribbed construction for highest precision and stability. The wide range of accessories complements the lathe's functions. The bed is equipped with a milled surface for securing mill/drill head PF 400.Technical Data:Centre distance 400mm, centre height 85mm. The swing over the top slide is 116mm. Solid, ribbed bed is made of quality cast iron with ground and hardened slideways. Oversized spindle with 2 adjustable taper bearings, 3MT taper and 20.5mm bore. Run-out, without chuck, 0.005mm.The precision 3 jaw chuck has a capacity of up to 100mm. Six spindle speeds are provided via belt drive: Level 1: 80 / 330 / 1,400rpm; Level 2: 160 / 660 / 2,800rpm. Powerful, quiet capacitor motor with 550W output. All adjusting wheels fitted with scales that may be zeroed. 1 division = 0.05mm. The auto feed has speed of 0.07 or 0.14mm/rev. An integrated gearbox with change gears provides 19 pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.50 - 1.75 - 2.0 - 2.5 - 3.0mm. Imperial threads of 10 - 48 TPI are also possible. A rotating centre 2MT and 10mm 2MT gear chuck are included. Cross slide travel 85mm and topslide 55mm. Swivels through 45° for taper turning. Tailstock with 2MT (short), spindle travel 40mm and a diameter of 24mm. Supplied with scale. Approx. size 900 x 400 x 300mm. Weight approx. 45kg. For cutters of 10 x 10mm. Specification for Proxxon PD 400 Precision Lathe: Centre Height: 85mm Cross Slide Travel: 85mm Distance Between Centres: 400mm Height Over Cross Slide: 58mm Model: PD 400 Nett Weight 45kg Overall: L x W x H 900 x 400 x 300mm Power: 550W Spindle Bore: 20.5mm Spindle Speed: (6) 80 - 2,800rpm Taper Headstock: 3MT Taper Tailstock 2MT Thread Pitch Range: 0.2 - 3.0mm (10 - 48tpi) Top Slide Travel: 55mm
Replacement cutting discs Made of ceramic compound: 50% aluminium oxide and 50% silicon carbide. Suitable for cutting steel, non-ferrous metal as well as small wood and ceramic bars.
This unit is fitted to the lathe PD 400 which is supplied with a milled area for fixing this accessory. A slotted table of size 150 x 110mm is supplied, with 3 T-nuts. The table is fitted to the cross slide with 2 bolts. The cross slide thus replaces the cross table.Technical Data:220 - 240V. 140W. 50-60Hz. Spindle revolutions 280 - 550 - 870 - 1,200 - 1,500 und 2,200rpmNOTE LATHE IS NOT INCLUDED
CNC control of Z-axis and X-axis enables precise turning, facing and longitudinal turning of steel and non-ferrous metal. Axes drive with powerful step motors and recirculating ball spindles (no backlash). For facing and longitudinal turning, for turning balls, radii and any freely formed contours made of steel and non-ferrous metal. Work piece machining is effected automatically by software and can be reproduced as often as required. PROXXON CAD/CAM software for WINDOWS® Brief description of software and hardware: The software is harmonized with mechanics, motors and the control unit of the CNC machine, thus offering the optimum performance. The CNC control unit controls the step motors of the machine. The PC software provides the machine with the geometry information for travel of the tools (via RS 232 interface). This means that the control unit is the interface between software and the mechanics of the machine. Powerful micro processors and accordingly dimensioned step motors and phases ensure that the motors always provide enough power for any machining processes. Two freely usable output relays in the casing of the control unit provide facilities for control of additional functions, e.g. a working lamp. Including connection cables with suitable plugs and built-in power supply for connection to 220 - 240V. Simple creation of work piece geometry The CAD window is displayed when the programme starts. The work piece contour is created in the familiar WINDOWS® environment. Numerous auxiliary aids help during programme operation, which supports both coordinate entry (absolute and relative) in addition to mouse use. Read-in of existing files in standard file formats (e.g. .dxf or .hpgl) is possible. Technology information is allocated to every drawing element. This makes, for example, different processing speeds and manual tool replacement possible. Automatic generation of CAM data The finished drawing of the tool is converted, by a mouse click, into the instruction set for the machine. So, machining can be started immediately. The instruction set generated in this way is in accordance with DIN/ISO 66025 and can be manually edited and exported. Conversely, the system also permits importing or complete self writing of data sets. Manual work The handwheels are replaced with the step motors of the CNC machine. Nevertheless, manual machining is possible with the help of cursor buttons, since the step motors can be operated manually. Software installation The PC software is supplied on a CD ROM. The problem-free installation is effected automatically under Windows®.
Proxxon 10mm Chuck & Adaptor for PD 400 & PD 230/E
This product is ideal for architectural models, designers, decorators, artists (teaching too), prototypes as well as classical railroad, plane and model boat building. Double function fence with lockable feed bar. The unit's double wound transformer and insulation to class 2 ensure the cutter is absolutely safe. The cutting wire operates at 10V, 1A. The large base with 390 x 280mm table ensures smooth and easy movement of the workpiece. The printed grid and protractor ease division and cutting. Solid aluminium overarm has a 350mm throat and offers 140mm capacity in height. The holder and wire coil (30m, 0.2mm diameter is included) may be shifted along the overarm to enable mitre cutting. A LED indicates operation and prevents burnt fingers (the cutting wire heats to maximum in less than 1 second). N.B. The correct temperature, being material type and thickness dependent, is learnt from experience. Optimum profiles are cut at lower temperatures and cutting force. Option: Spare wire: Proxxon Thermocut Hot-Wire Cutter Replacement Wire
Turning in miniature is a pleasing hobby. This precision made wood lathe is fitted with electronic speed control. The ball bearing spindle is bored through at 10mm, for series production of small parts. The stable tool rest is adjustable in all directions. Powerful drive motor with speed control between 1,000 and 5,000rpm. Bed is made from stable, thick-walled aluminium profile. A faceplate for turning larger items is included. Workpieces secured by means of collets (1 each of 2, 3, 4, 6, 8 and 10mm) are included. Centre distance of 250mm, 40mm swing, 25mm swing over support. Supplied with drive centre, live centre, faceplate and 6 collets.Specification for Proxxon DB 250 Micro Woodturning Lathe:Collets Supplied 2, 3, 4, 6, 8 and 10mmDistance Between Centres 250mmModel DB250Nett Weight 2.5kgPower 150WSpeed 1,000 - 5,000rpm
Five piece HSS chisel set. A high quality set with the most frequently used turning tools: gouge, skew, parting tool, beading tool and scraper. Neatly packed in a wooden box.
With individually adjustable jaws. Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 - 35mm (inside) and from 14 - 67mm (outside). The DB250 headstock spindle of thread M16 x 1 screws directly into the chuck.
Three jaw chuck for the lathe DB 250. Used for concentric clamping. Made from die-cast zinc and offering 1.5 to 32mm and 12 to 65mm when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 headstock spindle.
Drill chuck with sliding sleeve for the tailstock of the DB 250. Clamps up to 5.0mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
The TG125/E is a precision device for fine sanding work and minor material correction. It features electronic speed control giving the range 250 to 800m/min. It is suitable for all wood types, steel, non-ferrous metals, precious metals, plastics (also Plexiglas and glass fibre). The sander is both powerful and vibration-free running thanks to balanced DC 140W motor, housed in a glass fibre reinforced polyamide case. The 140 x 98mm table is aluminium, adjustable to 50° incline downwards, 10° upwards. The 125mm diameter disc has a glued-on silicon, film this surface ensures that self-adhesive sanding discs can be removed without problems after use. Two additional quadratic silicon films ensure that used discs can be stored and reused. A suction channel allows connection to a vacuum for dust-free working. Supplied with 2 sanding discs of each grit: 80, 150 and 240grit. The machine can also be used vertically (clamped for safety) for sharpening tools etc.
A small but precise mains driven modelling saw with an 8mm depth of cut using the standard 58mm diameter blade. It has a fully machined aluminium table top some 160 x 160mm mounted on a sturdy ABS base, and comes with a mitre fence and rip fence. There are 2 blades available for different materials, the 300108 alternating set for wood and plastics and the 300109 for fine cuts. There is a 34mm diameter dust extraction port at the rear of the machine.
50mm x 1.0 mm (10 mm bore). 20 teeth. For extremely clean cuts of balsa, plywood. Can also be used for cutting PC cards and Polycarbonate.
50mm diameter (10mm bore) 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other 'difficult' materials.
50mm. 1mm thick, 10 teeth, for cutting hard & soft woods. PC Cards & aluminium.
HSS Saw Blade. 50mm x 1.1 mm (10 mm bore) . Fine Teeth - Designed for precision cutting.
With electronic speed control from 3,000 to 9,000 rpm or 8 to 24m/sec with standard wheels. The slim housing facilitates the grinding of long workpieces and includes an adapter to connect a vacuum cleaner to the unit. The tool rests and eye guards are both adjustable. A spindle lock eases the changing of wheels and discs. Supplied with a 50mm x 13mm corundum (grade N) and silicon carbide (soft compound) disc for general grinding and sharpening of hard materials respectively.The right hand drive accepts the polishing arbour supplied as standard. Wheels 50 x 13 x 12.7mm. Motor 240V. Insulated to class 2.
Easily fitted to the arbour.Steel wire brush for de-rusting & cleaning steel & NF metals.Brass wire brush to polish non-ferrous metals & precious metals.Felt wheel is used on painted surfaces.The chamois and cotton wheels provide a high gloss finish on non-ferrous metals andprecious metals, as well as paints and smooth surfaces.
At last, a simple and effective drill bit sharpening machine which is easy to operate and which will produce standard 118° drill points accurately every time. The drill bit is clamped into the movable carriage, advanced up to the grinding wheel and the carriage is moved from left to right to produce an accurately ground relief angle; a repeat operation with the carriage rotated about its axis produces a perfectly matched second relief angle. The carborundum wheel, which is rotated at 8000rpm by the quiet 85W motor, will sharpen carbon steel and high speed steel bits from 3mm to 13mm in diameter. A dressing stone for re-truing the wheel is included; full instructions are also supplied.
Corundum (grade N) With 12.7mm bore. Proxxon Corundum Wheel for SP/E & BSG 220
Silicon carbide. With 12.7mm bore. Soft compound for very hard materials.
Adapters for sharpening of small drill bits These adapters extend the BSG 220's range to cover 1.5 - 3mm. One each adapter for sizes 1.5 - 1.6 - 2.0 - 2.4 - 2.5 and 3.0mm. Neatly packed in a wooden box with sliding lid.
Load bearing components are all made of die-cast aluminium, with milled seats for bearings and spindles, for vibration-free, smooth thicknessing of hard and soft woods. The result is a high grade, very smooth surface. The triple spindled table is made from die-cast aluminium and milled to close tolerances. The handwheel (zero adjustable) allows adjustments to 0.1mm. Auto feed is fitted as standard, as well as an anti-kickback device. The infeed roller is riffled and spring loaded to assist in feeding uneven materials. The outfeed roller is rubber coated to prevent marking the newly planed wood. The cutter block is fitted with two HSS knives. The on/off switch is dust protected and fitted with a no-volt-release switch. Table length 232mm. Overall machine dimensions 280 x 230 x 235mm. Weight approximately 8kg.
Spare blades. For thicknesser DH 40. Made of HSS. Length 82mm.
* Perform an oil change in just 2-3 minutes * Pumps, motor, diesel and heating oil effortlessly * 250litres an hour (fitted with a 1/2" feed hose) * Pumps the oil out of an engine via the dipstick shaft * Includes a 6mm diameter dip wand * Crocodile clips fitted suitable for connection to a car battery * 130 x 90 x 90mm, weight 1.4kg This small neat unit is will help you perform an oil change in just 2-3 minutes.This pump transfers, motor, diesel and heating oil effortlessly at a rate of 250 litres an hour (fitted with a 1/2" feed hose). You can pump the oil out of an engine via the dipstick shaft in which case the flow rate is 3 litres per minute at 40°C oil temperature. The unit includes a 6mm diameter by 800mm long dip wand for this purpose. The crocodile clips fitted to the 12 Volt DC feed cables are suitable for connection to a car’s battery. The feed and supply sides have 1/2" connectors. An outlet hose of approximately 1,500mm is also included. The housing is made of glass fibre reinforced polyamide; approx 130 x 90 x 90mm.
Accurately cuts small items of metal, wood and plastic. Table movable through 45°, allowing mitre cuts. Workpieceis fastened tightly and accurately by means of the integrated clamping device. Clamp jaws 27mm wide and maximum workpiece diameter 20mm. Depth of cut to 13mm. A special slot is provided to clamp H0 model tracks. The fence accepts lengths up to 140mm. Five ceramic cutting discs 50 x 1 x 10mm are also included suitable for cutting steel, non-ferrous metals as well as small wooden or plastic rods. Peripheral speed 20 m/sec.
A powerful DC special motor in this compact device ensures an astonishingly high cutting performance when cutting wood, plastics, glass fibre reinforced plastic, paper, cardboard, foil and similar materials. Slim and light: A diameter of just 36mm makes the ergonomically shaped casing easy to handle and unrivalled for fatigue-proof work and accurate guiding. Important: The MIC makes it possible to "dip in" to the work piece surface (e.g. for cut-outs). The saw blade guard folds up automatically during cutting. Technical data: 220 - 240V. 30W. 15,000/min. Maximum cutting depth 4mm. Cutting width 0.5mm. Weight approx. 300g. Class 2 insulation.
Replacement cutter for the MICRO Cutter MIC 23 x 0.1mm, 2.6mm bore
