Punches, Scribers, Surface Gauges, Layout Blue, Hammers

Optical Centrepunch  (Ref: OPS10)

New- OPTICAL CENTREPUNCH SET
This very useful and attractive tool is a must when accurate centrepunching is required
Achieve precise punch location
It is supplied with 2 perspex rods with either cross hair or bullseye target- these are precision made so as to magnify and illuminate the workpiece to be punched

Using either one of the rods to posiition the body is then simple. After that you simply remove the rod and insert either the 60 or 120 degree hardened steel punches and tap with a hammer in the usual way

The 48mm inch diameter body is fitted with a with a slip resistant base
Punches 9.5mm diameter 60° or 90°

EVERY WORKSHOP SHOULD HAVE ONE!
CLICK THE IMAGE FOR A LARGER PICTURE!

£28.80

£34.56

Optical Centrepunch  (Ref: 180975)

New Style - OPTICAL CENTREPUNCH SET
Similar to the above mut with a slightly different method of opertion

This very useful and attractive tool is a must when accurate centrepunching is required
Achieve precise punch location
It is supplied with 2 perspex rods with either cross hair or bullseye target- these are precision made so as to magnify and illuminate the workpiece to be punched

Using either one of the rods to posiition the body is then simple. After that you simply rotate the top section and click it into place. This will leave either the 60 or 90 degree hardened steel punch in the exact position required.

Punches 9.5mm diameter 60° or 90°

EVERY WORKSHOP SHOULD HAVE ONE!
CLICK THE IMAGE FOR A LARGER PICTURE!

£31.82

£38.18

New 14 Pc Wad Punch Set  (Ref: 22032S03)

Great new Set !!!- make an accurate and clean hole !
A set of 14 quality hardened steel wad punches in the following sizes.
3/16 (5mm)
1/4 (6mm)
5/16 (8mm)
3/8 (10mm)
7/16 (11mm)
1/2 (13mm)
5/8 (16mm)
3/4 (19mm)
7/8 (22mm)
1" (25mm)
1 1/8 (28mm)
1 1/4 (32mm )
1 3/8 (35mm)

Included is a comfortable rubber protection handle. SORRY OUT OF STOCK

£22.72

£27.26

10 Pc Wad Punch Set  (Ref: SDY032.)

Also known as hollow punches
5 6 8 10 12 15 16 22 25 & 32mm

£13.62

£16.34

Ratchet Drive Screw Punch Set (Knockout punches)  (Ref: 21282S02)

New - Quality Screw punch set-
For easily making holes in sheet metal- covers the range 22- 66.8 mm
Contents
1 x HSS Pilot Stepped Drill
1 x atchet Handle Drive
1 x Set Punches 22mm - 27.5mm - 34.3mm - 43mm - 49mm & 60.8mm

£50.04

£60.05

Toolmakers Surface Gauge Small  (Ref: SG47.)

Base and scriber hardened. Bottom grooved for cylindrical work, complete with fine adjustment. Base has two retractable gauge pins to set against the edge of a surface plate. Supplied with 4" & 7" Spindles

£11.80

£14.16

Toolmakers Surface Gauge Large  (Ref: SG92.)

Base and scriber hardened. Bottom grooved for cylindrical work, complete with fine adjustment. Base has two retractable gauge pins to set against the edge of a surface plate. Supplied with 9" & 12" Spindles

£17.26

£20.71

5 pc Centrepunch Set - ROUND HEAD  (Ref: CPR1)

This set contains punches 1/16, 5/64, 3/32, 9/62 & 5/32 punches. They are made of hardened & tempered toolsteel with a heavy knurled body. Available round or square head.Available with round or square heads!

£4.10

£4.92

Centrepunch with Magnifier  (Ref: CPM1.)

This tool comprises a handy size centre punch with a lens attached to the side by means of a U shaped spring clip. This allows adjustment to suit the user.

£4.10

£4.92

Optical Centrepunch  (Ref: OPT5)

New- OPTICAL CENTREPUNCH SET. This very useful and attractive tool is a must when accurate centrepunching is required
Achieve precise punch location. It us supplied with 2 perspex rods with either cross hair or bullseye target- these are precision made so as to magnify and illuminate the workpiece to be punched. Using either one of the rods to posiition the body is then simple. After that you simply reove the rod and inserts either the 60 or 90 degree hardened steel punches and tap with a hammer in the usual way

The 48mm inch diameter body is fitted with a with a slip resistant base
Punches 9.5mm diameter 60° or 90°
EVERY WORKSHOP SHOULD HAVE ONE!

£29.14

£34.97

Optical Centrepunch  (Ref: OP270SPEC,.,,,..)

This instrument provides an accurate location over cross scribed hole centre lines prior to centre punching. A clear dot and circle is viewed through the 8 x magnification lens for accurate targeting of the centre position.

SAVE 40%!!! LIMITED OFFER!!

£46.40

£55.68

New Soba Automatic Centrepunch and Carbide Magnetic Scriber  (Ref: 180206)

New - Extremley useful set from Soba. The automatic centrepunch has an adjustable cap which conveniently controls the depth of punch. The point is replaceable and can also be easily re sharpened. A pocket clip is also attached.

The carbide scriber has a carbide tip for long life and clear marking on materials including hardened steel , glass & ceramics , On the other end is a permenant magnet wich is useful for picking up small parts in hard to reach places

£7.24

£8.69

Heavy Duty Automatic Centrepunch  (Ref: ACP1.)

The automatic centrepunch gives a clear indent without hammering. Just press down and a sharp blow results The depth of impression is variable by turning the top knurled cap. New Improved heavy duty version.

£6.33

£7.60

New Mini Automatic Centrepunch  (Ref: 180221)

A miniature version of the traditional Automatic Centrepunch. Adjustable end cap varies the depth of impression.
Body length is only 3" long so can easily fit in your pocket etc.

£4.50

£5.40

NEW- AUTOMATIC CENTRE PUNCH SET SORRY OUT OF STOCK  (Ref: ACP2.)

THIS SET COMPRISES A HEAVY DUTY AUTOMATIC CENTRE PUNCH WHICH IS EASY TO USE WITH SINGLE HANDED OPERATION.THE DEPTH OF PUNCH CAN BE EASILY ADJUSTED BY TURNING THE END CAP. THE REPLACEABLE POINT IS MADE FROM HARDENED ALLOY STEEL.

AS A BONUS A SECOND SIMILAR AUTOMATIC PUNCH IS ALSO INCLUDED. THIS ONE IS LIGHTER AND EASY TO CARRY IN YOUR POCKET ETC. BOTH TOOLS COME WITH SPARE PUNCHES.- FANTASTIC VALUE AND ONLY AVAILABLE FROM CHRONOS!!

£9.06

£10.87

Transfer Punch 20-35mm  (Ref: TP2)

Simple and effective way to mark the centre of an existing hole onto a workpiece below.

£6.14

£7.37

Transfer Punch 5-20mm  (Ref: TP1)

Simple and effective way to mark the centre of an existing hole onto a workpiece below.

£4.33

£5.20

Imperial Transfer Punch Set  (Ref: TPS1.)

These punches are manufactured from tool steel and are hardened & tempered. This 28 piece set is supplied in a convenient stand and comprises sizes from 3/32 - 1/2" in increments of 1/64" plus one 17/32 punch.

£12.05

£14.46

MetricTransfer Punch Set SORRY OUT OF STOCK  (Ref: TPS2.)

These punches are manufactured from tool steel and are hardened & tempered. This 25 piece set is supplied in a convenient stand and comprises sizes from 1-13mm.
K

£12.05

£14.46

A-Z Letter Transfer Punch Set  (Ref: TPS3)

These punches are manufactured from tool steel and are hardened & tempered. This 26 piece set is supplied in a convenient stand and comprises sizes Letter A - Zmm.

£12.05

£14.46

1-60 No Transfer Punch Set  (Ref: TPS4)

These punches are manufactured from tool steel and are hardened & tempered. This 60 piece set is supplied in a convenient stand and comprises number sizes from 1- 60

£13.91

£16.69

SET OF 4 OF THE ABOVE SETS-  (Ref: TPSET)

Includes the above sets
1-60
A-Z
Imperial
Metric

£44.62

£53.54

Imperial Transfer Punch Set 1/2 - 1"  (Ref: TPS5)

33 PC. 1 to 1/2" TRANSFER PUNCH SET
* 33 pieces
* size: 1 to 1/2" by 64th
* Heat-treated steel
* Black oxide rust resistant finish
* Sturdy steel stand
* Stand clearly marked size

£34.38

£41.26

1/16 Number Punch Set  (Ref: MLS200..)

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

£3.61

£4.33

1/8 Number Punch Set  (Ref: MLS202..)

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

£4.52

£5.42

3/16 Number Punch Set  (Ref: MLS203..)

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

£5.24

£6.29

1/4 Number Punch Set  (Ref: MLS204..)

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

£5.42

£6.50

1/16 Letter Punch Set  (Ref: MLS210...)

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

£7.24

£8.69

1/8 Letter Punch Set  (Ref: MLS212..)

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

£9.06

£10.87

3/16 Letter Punch Set  (Ref: MLS213...)

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

£9.97

£11.96

1/4 Letter Punch Set  (Ref: MLS214...)

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

£11.89

£14.27

Faithfull Pocket Scriber  (Ref: E225.)

Pocket Scriber with black body and knurled chuck. The tungsten carbide point can be reversed in the body for convenient storage and the pocket clip prevents the tool from rolling off the bench. Spare points available. Length Closed is 3.1/2/85mm.

£9.06

£10.87

Double Ended Scriber  (Ref: DES1.)

Single Ended Scriber  (Ref: SC2.)

Scraper/Scriber  (Ref: SC3.)

Double Ended Carbide Scriber  (Ref: CG119..)

Excellent scriber with carbide points.

£4.52

£5.42

Scriber with Carbide Tip  (Ref: SC4.)

Scriber with Carbide Tip and Magnetic End  (Ref: SC6..)

Very useful scriber- Knurled body with handy pocket clip. Carbide tip. It also has a pick ip magnet at the other end.
SORRY - OUT OF STOCK

£4.52

£5.42

Pin Punch Set 1/16 - 5/32  (Ref: PP1..)

4 pc Set 1/16 , 3/32 , 1/8 & 5/32

£4.10

£4.92

Pin Punch Set 3/16 - 5/16  (Ref: PP2,,,)

4 PC Set 3/16 , 7/32 , 1/4 & 5/16

£4.10

£4.92

8pc Pin Punch Set 1/16 - 5/16  (Ref: PP3.)

8 pc Set -1/16 , 3/32 , 1/8 , 5/32 , 3/16 , 7/32 , 1/4 & 5/16
Great Quality with a heavy knurled body - 4" long
Supplied in a storage wallet

£7.75

£9.30

Set of 18 Qulity Pin Punches Plus Automatic Centrepunch  (Ref: 180650)

New from Soba and with the quality you would expect. This set includes 17 Pin Pin Punches which are marked with their appropriate size in both Metric & Imperial. Both standard and long series punches are included A good quality adjustable automatic centrepunch is also included and the set is presented in a handy roll up pouch. Sizes are as follows:

3/8 x 8"
5/16 x 8"
1/4 x 8"
3/16 x 8"
5/32 x 8"
1/8 x 8"
3/32 x 8"
1/16 x 8"
1/16 x 4"
3/32 x 4"
1/8 x 4"
5/32 x 4"
3/16 x 4"
7/32 x 4"
1/4 x 4"
5/16 x 6"
3/8 x 6"

£20.03

£24.04

Long Drive Pin Punch Set  (Ref: LPP..)

Centreless ground,hardened & tempered, 8" overall length .Supplied in plastic wallet. Drive pin section 3 1/2".

£8.66

£10.39

Chisel & Punch Holder  (Ref: CPH1..)

This handy holder allows you to hold punches and chisels in normally inaccessible work areas. Heavy duty plastic handle with nylon tip and steel frame reduce risk of hand injury. Capacity 0-1" chisels & punches.

£3.60

£4.32

Jewellers Anvil  (Ref: AV13..)

Anvil in x 1 1/4". Chrome finish.

£11.00

£13.20

Iron Doming Block  (Ref: DB5...)

Heavy duty iron doming block with 6 sides providing 17 different sizes of dome.
2 1/2" Square

£17.99

£21.59

Stuarts Marking Paste (Tin)  (Ref: SLB100...)

A non abrasive , easily spread marking paste with many applications. Very good for showing high spots etc. 38gm tin

£4.50

£5.40

Stuarts Marking Paste (Tube)  (Ref: SLB2...)

Thor Copper Faced Hammer  (Ref: THO38)

A malleable iron head of extra heavy construction,which is fitted with both faces of pure electrolytic copper.

£10.45

£12.54

Multi Headed Hammer  (Ref: MHH1)

This useful hammer comes complete with 6 interchangeable heads,has a knurled aluminium handle and a strong steel shaft ands hammer body.
SORRY- OUT OF STOCK

£4.50

£5.40