NEW ITEMS



Dasqua Digital Zero Setting Device (Ref: 18010605)

Dasqua Digital Zero Setting Device

CLICK HERE FOR THE INSTRUCTION SHEET

DASQUA PRECISION WORKSHOP TOOLS - GUARANTEED FOR LIFE

Height 50mm,with graduation 0.01mm
For setting tools to zero determining the reference point of the machine spindle



Special hardened steel
No damage to cutting edge of tool during setting
No feeler gauge or edge finder necessary

Technical Data:
Height of body-reference face:49mm;
Indicator display:0.01mm;
Spring-mounted contact face:52.5mm;
Height of the spring-loaded probe face when the Digital indicator reads 50mm








39.96 47.95


Quantity: 

People who bought Dasqua Digital Zero Setting Device also bought::

1. Dasqua Marking Gauge 300 mm x 0.1 mm
2. Dasqua Marking Gauge 200 mm x 0.1 mm
3. Dasqua 90' Flat Edge Square With Wide Base - 150 mm x 100 mm





Dasqua Premium Magnetic Parallel Set (Ref: 18010115)

Dasqua Premium Magnetic Parallel Set

DASQUA PRECISION WORKSHOP TOOLS - GUARANTEED FOR LIFE

NEW ! DASQUA MAGNETIC PARALLELS !

HEIGHT TOLERANCE + - 0.005 MM
WIDTH TOLERANCE + - 0.01 MM
HARDNESS 55-60 HRC
REDUCES THE CLAMPING TIME UP TO 10%
PRECISION GROUND AS PAIRS

LENGTH 150MM,
WIDTH 2.5MM
,HEIGHT 25MM; 35MM; 40MM; 45MM; 47MM

RELIABLE HIGH PRECISION
EXCELLENT SURFACE AND STABILITY
HIGH DURABILITY
GREAT FOR INDUSTRIAL USE







42.82 51.38


Quantity: 

People who bought Dasqua Premium Magnetic Parallel Set also bought::

1. Dasqua Marking Gauge 200 mm x 0.1 mm
2. Dasqua 90' Flat Edge Square With Wide Base - 100 mm x 70 mm
3. Dasqua Digital Zero Setting Device





Camlock Chuck Backplate D1-3 For 125 mm Lathe Chucks (Ref: 41125D13)

Camlock Chuck Backplate D1-3 For 125 mm Lathe Chucks

D1 Type Backplate for 125 mm chucks D-13 Type
Complete with mounting studs and screws

26 mm thick

CLICK THE IMAGE FOR A LARGER PICTURE

34.35 41.22


Quantity: 





Camlock Chuck Backplate D1-4 For 125 mm Lathe Chucks (Ref: 41125D14)

Camlock Chuck Backplate D1-4 For 125 mm Lathe Chucks

D1 Type Backplate for 125 mm chucks D-14 Type
Complete with mounting studs and screws

26 mm thick

CLICK THE IMAGE FOR A LARGER PICTURE

34.35 41.22


Quantity: 

People who bought Camlock Chuck Backplate D1-4 For 125 mm Lathe Chucks also bought::

1. Dasqua 0-150 mm / 0-6" Absolute Digital Caliper
2. Dasqua 0-100 mm / 0-4" Absolute Digital Caliper
3. R8 Stub / Slitting Saw Arbors





Camlock Chuck Backplate D1-3 For 160 mm Lathe Chucks (Ref: 41160D13)

Camlock Chuck Backplate D1-3 For 160 mm Lathe Chucks

D1 Type Backplate for 160 mm chucks D-13 Type
Complete with mounting studs and screws

29mm thick

CLICK THE IMAGE FOR A LARGER PICTURE

42.58 51.10


Quantity: 





Camlock Chuck Backplate D1-4 For 160 mm Lathe Chucks (Ref: 41160D14)

Camlock Chuck Backplate D1-4 For 160  mm Lathe Chucks

D1 Type Backplate for 160 mm chucks D-14 Type
Complete with mounting studs and screws

29mm thick

CLICK THE IMAGE FOR A LARGER PICTURE

42.58 51.10


Quantity: 





Camlock Chuck Backplate D1-6 For 200 mm Lathe Chucks (Ref: 41200D16)

Camlock Chuck Backplate D1-6 For 200  mm Lathe Chucks

D1 Type Backplate for 200 mm chucks D-16 Type
Complete with mounting studs and screws

30 mm thick

CLICK THE IMAGE FOR A LARGER PICTURE

47.50 57.00


Quantity: 





Camlock Chuck Backplate D1-3 For 200 mm Lathe Chucks (Ref: 41200D13)

Camlock Chuck Backplate D1-3 For 200  mm Lathe Chucks

D1 Type Backplate for 200 mm chucks D- 13 Type
Complete with mounting studs and screws

30 mm thick

CLICK THE IMAGE FOR A LARGER PICTURE

44.44 53.33


Quantity: 





Camlock Chuck Backplate D1-4 For 200 mm Lathe Chucks (Ref: 41200D14)

Camlock Chuck Backplate D1-4 For 200  mm Lathe Chucks

D1 Type Backplate for 200 mm chucks D- 14 Type
Complete with mounting studs and screws

30 mm thick

CLICK THE IMAGE FOR A LARGER PICTURE

44.44 53.33


Quantity: 





Camlock Chuck Backplate D1-6 For 250 mm Lathe Chucks (Ref: 41250D16)

Camlock Chuck Backplate D1-6 For 250  mm Lathe Chucks

D1 Type Backplate for 250 mm chucks D-16 Type
Complete with mounting studs and screws

30 mm thick

CLICK THE IMAGE FOR A LARGER PICTURE

55.11 66.13


Quantity: 





Dasqua Precision Dial Bore Gauge 6 - 10 mm  (Ref: 55111105)

Dasqua Precision Dial Bore Gauge 6 - 10 mm

DASQUA PRECISION WORKSHOP TOOLS - GUARANTEED FOR LIFE

PRECISION DIAL BORE GAGE
• For close tolerance measurement of holes, taper and roundness.
• Carbide anvils; supply with fixed or inserting anvils.
• Extensions and washers for fine adjustment in sizes to select a specific range.
• Ergonomic design with non-slip insulating grip.


6-10mm X 0.01mm / 40 mm

CLICK THE IMAGE ON THE LEFTFOR A LARGER PICTURE

50.00 60.00


Quantity: 





Dasqua Super Big Screen Waterproof Digital Caliper 0-150 mm / 0-6" (Ref: 23107105)

Dasqua Super Big Screen Waterproof Digital Caliper 0-150 mm / 0-6

DASQUA PRECISION WORKSHOP TOOLS - GUARANTEED FOR LIFE

IP54 WATER PROOF DIGITAL CALIPER

• Strictly made in accordance with DIN862.

• IP54 protection agaist water,oil,dust or any other liquid.

IP54 WATER PROOF DIGITAL CALIPER


• Sturdy metal housing.

• Large easy-to-read diasplay.

• Silkysmooth movement throught.

• Hardened,grounded and lapped measuring surfaces.

• Zero buttos allows the display to be zero-set at any slider position along the scale.




20.86 25.03


Quantity: 

People who bought Dasqua Super Big Screen Waterproof Digital Caliper 0-150 mm / 0-6" also bought::

1. HSS DRILL BIT 3.2 MM
2. 5C Collet 28 MM
3. 5C Collet 30 MM





9PC Mini HSS Endmill Milling Cutter Set 3/16 Shank Double Ended (Ref: 12054S01)

9PC Mini HSS Endmill Milling Cutter Set 3/16 Shank Double Ended

A SET OF 9 HSS DOUBLE ENDED MILLING CUTTERS WITH A 3/16" DIAMETER SHANK

SIZES ARE 1/16 5/64 7/64 1/8 9/64 5/32 11/64 3/16

COMPLETE IN A NICE WOODEN STORAGE BOX





16.66 19.99


Quantity: 

People who bought 9PC Mini HSS Endmill Milling Cutter Set 3/16 Shank Double Ended also bought::

1. Standard Length Beargrip Allen Keys Imperial
2. 1/2 MILD STEEL ROUND
3. TYPE 1 HSS LEFT HAND BAR TURNING TOOL 12 MM SQ





3-JAW SELF CENTERING LATHE CHUCK WITH DIRECT MOUNT D1 CAMLOCK  (Ref: 42157004)

3-JAW SELF CENTERING LATHE CHUCK WITH DIRECT MOUNT D1 CAMLOCK

Chuck Diameter - 6 1/4"
Taper Size - D14
Stud Dia - 5/8
Hile Dia - 1.654"




116.63 139.96


Quantity: 





SET OF 81 HSS NUMBER WIRE GAUGE MICRO DRILLS WITH PIN VICE 66 - 80 (Ref: 11009WF14)

SET OF 81 HSS NUMBER WIRE GAUGE MICRO DRILLS WITH PIN VICE 66 - 80

81pc Number Drill Set with Pin Vice A set of HSS mini twist drills ranging in size from number 66-80 ideal for model making, 10pcs of each no 66, 68, 70, 72, 74, 76, 78, 80. with pin vice to hold the drills comes in fitted wooden box

16.66 19.99


Quantity: 

People who bought SET OF 81 HSS NUMBER WIRE GAUGE MICRO DRILLS WITH PIN VICE 66 - 80 also bought::

1. SET OF 101 HSS NUMBER WIRE GAUGE MICRO DRILLS WITH PIN VICE 61 - 80
2. Archimedian Drill for Micro Drills 1 mm Capacity
3. New Small 2 3/4" Diameter Rotary Table





SET OF 101 HSS NUMBER WIRE GAUGE MICRO DRILLS WITH PIN VICE 61 - 80 (Ref: 11009WF13)

SET OF 101 HSS NUMBER WIRE GAUGE MICRO DRILLS WITH PIN VICE 61 - 80



16.66 19.99


Quantity: 

People who bought SET OF 101 HSS NUMBER WIRE GAUGE MICRO DRILLS WITH PIN VICE 61 - 80 also bought::

1. SET OF 81 HSS NUMBER WIRE GAUGE MICRO DRILLS WITH PIN VICE 66 - 80
2. New - 50 pc HSS Microdrill Set with 2.35 mm Dia Shank
3. HSS DRILL SET 50 pc 1-6mm x 0.1 mm





BS-0 Precision Dividing Head With 5" 3-jaw Chuck & Tailstock (Ref: 40208001)

 BS-0 Precision Dividing Head With 5

Click Here for the User Manual

NEW ! BSO DIVIDING HEAD COMPLETE WITH
DIVIDING PLATES , TAILSTOCK & 5" 3 JAW CHUCK
This semi-universal dividing head, is for dividing workpieces into equal partitions on your milling machine etc. By using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your requirements . It can be used for direct and indirect dividing. Able to complete gear, face and flute processing without need of accessories, however its whole construction is the same with the universal type. The 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing. 3 dividing plates are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers.





249.96 299.95


Quantity: 





New Small 2 3/4" Diameter Rotary Table (Ref: 234RT)

New Small  2 3/4

2 3/4" / 68 mm Small Rotary Table
4 Tee-slots
Table Ratio is 1:48
4 mounting slots 90mm between centres for fixing to a table.
T-slots are 7mm deep x 7mm at thin point x 12mm at bottom
Overall height 40 mm
Can be used on the lathe as well as the Milling Machine.




48.00 57.60


Quantity: 

People who bought New Small 2 3/4" Diameter Rotary Table also bought::

1. SCT 6" Angle Plates Open End
2. Pair of 150mm Magnetic Rubber Vice Jaws
3. Pair of 125mm Magnetic Rubber Vice Jaws





SCT Precision Milling Vice with Swivel Base 3" / 80 mm (Ref: 40082002)

SCT Precision Milling Vice with Swivel Base 3

Suitable for milling , shaping & drilling machines
Can be used as a staionary or swivel vice
Precision Ground accuracy
Full 360 degree swivel base with accurate graduations
Drop forged crank handle

Width of jaw Opening of jaw Height of jaw
80 mm 65 mm 35 mm





48.00 57.60


Quantity: 

People who bought SCT Precision Milling Vice with Swivel Base 3" / 80 mm also bought::

1. Soba HSS 1 MT Taper Shank Machine Reamer 7/32
2. Soba HSS Spiral Hand Reamer 3/16
3. 2" Precision Self Centering Machine Vice





2 Pc Adjustable U Clamp Set 0-60 mm (Ref: 41264001)

2 Pc Adjustable U Clamp Set 0-60 mm

Brass-footed U-Clamp Set for securing workpieces to mill table.

Cast Iron Clamps with Pivoting Brass Feet to protect workpieces
Adjustable Height: (0-60mm)
Includes : Studs, T-nuts, Flange Nuts, and Pivots (2 pieces per each item)

WIDTH - 37 MM
LENGTH - 125 MM
TABLE T SLOT SIZE - 14 MM
STUD SIZE M12


CLICK THE IMAGE FOR A LARGER PICTURE

29.21 35.05


Quantity: 

People who bought 2 Pc Adjustable U Clamp Set 0-60 mm also bought::

1. SPECIAL OFFER FIVE SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS
2. Digital Angle Finder Protractor Bevel Level Box
3. Set of 7 Soba Precision Parallels 150mm Long





2 Pc Adjustable U Clamp Set 0-80 mm (Ref: 41264002)

2 Pc Adjustable U Clamp Set 0-80 mm

Brass-footed U-Clamp Set for securing workpieces to mill table.
Cast Iron Clamps with Pivoting Brass Feet to protect workpieces
Adjustable Height: (0-80mm)
Includes : Studs, T-nuts, Flange Nuts, and Pivots (2 pieces per each item)

WIDTH - 47 MM
LENGTH - 150 MM
TABLE T SLOT SIZE - 18 MM
STUD SIZE M16

CLICK THE IMAGE FOR A LARGER PICTURE

36.63 43.96


Quantity: 

People who bought 2 Pc Adjustable U Clamp Set 0-80 mm also bought::

1. Morse Taper Sleeves- MT1-MT3 Tang End
2. Morse Taper Sleeves- MT2-MT3 Tang End
3. Spare Grinding Wheel For PP-13C Expert Drill Sharpening Machine





2 Pc Adjustable U Clamp Set 0-100 mm (Ref: 41264003)

2 Pc Adjustable U Clamp Set 0-100 mm

Brass-footed U-Clamp Set for securing workpieces to mill table.
Cast Iron Clamps with Pivoting Brass Feet to protect workpieces
Adjustable Height: (0-100mm)
Includes Studs, T-nuts, Flange Nuts, and Pivots (2 pieces per each item)

WIDTH - 57 MM
LENGTH - 200 MM
TABLE T SLOT SIZE - 20 MM
STUD SIZE M18

CLICK THE IMAGE FOR A LARGER PICTURE

49.00 58.80


Quantity: 





Soba 75 mm Boring Head Set Metric 2 MT (Ref: 1711402)

Soba 75 mm Boring Head Set Metric 2 MT

Soba Quality 75 mm Diameter Boring Head Set

2MT - Tapped 10 mm for a Drawbar

Complete with six 20 mm Diameter TCT Boring Tools- Various lengths from 100 - 160 mm


Adjustable 1 Div = 0.02 mm

Complete in Plastic Storager Case
Click the image on the left for a bigger picture




79.35 95.22


Quantity: 

People who bought Soba 75 mm Boring Head Set Metric 2 MT also bought::

1. Spare Insert for Glanze Face mill Cutter
2. Glanze MT2 25 mm Indexable Endmill with 3 APKT Inserts
3. Glanze MT2 20 mm Indexable Endmill with 3 APKT Inserts





Soba 75 mm Boring Head Set Metric 3 MT (Ref: 1711403)

Soba 75 mm Boring Head Set Metric 3 MT

Soba Quality 75 mm Diameter Boring Head Set

3MT - Tapped 12 mm for a Drawbar

Complete with six 20 mm Diameter TCT Boring Tools- Various lengths from 100 - 160 mm


Adjustable 1 Div = 0.02 mm

Complete in Plastic Storager Case
Click the image on the left for a bigger picture




79.35 95.22


Quantity: 

People who bought Soba 75 mm Boring Head Set Metric 3 MT also bought::

1. TYPE 2 HSS RIGHT HAND BAR TURNING TOOL 10 MM SQ
2. SPARE DCMT INSERT TiN COATED (GOLD)
3. New 1/2 Sq Shank Clamp Type Parting Tool with 6 " M-35 HSS Chipbreaker Blade





Soba 75 mm Boring Head Set Metric 4MT (Ref: 1711404)

Soba 75 mm Boring Head Set Metric 4MT

Soba Quality 75 mm Diameter Boring Head Set

4MT - Tapped 16 mm for a Drawbar

Complete with six 20 mm Diameter TCT Boring Tools- Various lengths from 100 - 160 mm


Adjustable 1 Div = 0.02 mm

Complete in Plastic Storager Case
Click the image on the left for a bigger picture




84.00 100.80


Quantity: 





Soba 75 mm Boring Head Set Metric INT30 (Ref: 17114030)

Soba 75 mm Boring Head Set Metric INT30

Soba Quality 75 mm Diameter Boring Head Set

INT30 - Tapped 12 mm for a Drawbar

Complete with six 20 mm Diameter TCT Boring Tools- Various lengths from 100 - 160 mm


Adjustable 1 Div = 0.02 mm

Complete in Plastic Storager Case
Click the image on the left for a bigger picture




89.00 106.80


Quantity: 





Soba 75 mm Boring Head Set Metric INT40 (Ref: 17114040)

Soba 75 mm Boring Head Set Metric INT40

Soba Quality 75 mm Diameter Boring Head Set

INt40 - Tapped 16 mm for a Drawbar

Complete with six 20 mm Diameter TCT Boring Tools- Various lengths from 100 - 160 mm


Adjustable 1 Div = 0.02 mm

Complete in Plastic Storager Case
Click the image on the left for a bigger picture




91.00 109.20


Quantity: 





Soba 75 mm Boring Head Set Metric R8 (Ref: 171140R8)

Soba 75 mm Boring Head Set Metric R8

Soba Quality 75 mm Diameter Boring Head Set

R8 - Tapped 7/16 UNF for a Drawbar

Complete with six 20 mm Diameter TCT Boring Tools- Various lengths from 100 - 160 mm


Adjustable 1 Div = 0.02 mm

Complete in Plastic Storager Case
Click the image on the left for a bigger picture




79.35 95.22


Quantity: 

People who bought Soba 75 mm Boring Head Set Metric R8 also bought::

1. Edge Finder Set
2. BRITISH HSS 60 DEGREE DOVETAIL CUTTER 19 MM DIAMETER
3. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603





9" Cast Iron Faceplate To Suit Myford ML7 Lathe  (Ref: 112170)

9

9" Diameter Cast Iron Face Plate to Suit Myford ML7 and Super 7 Lathes
Standard Thread 1 1/8 x 12 TPI




32.00 38.40


Quantity: 

People who bought 9" Cast Iron Faceplate To Suit Myford ML7 Lathe also bought::

1. 1 Pack of 20 2 BA Small Body Steel Nuts
2. 1 Pack of 20 Steel Cheeshead Screws 2 BA x 1"
3. 2 MT HALF CENTRE CENTRE for Myford Lathes





9" Diameter Faceplate for Boxford Lathes 1 1/2 x 8 TPI (Ref: 112171)

9


9" Diameter faceplate for Boxford Lathes

Standard 1 1/2 x 8 TPI Thread





39.95 47.94


Quantity: 

People who bought 9" Diameter Faceplate for Boxford Lathes 1 1/2 x 8 TPI also bought::

1. REPLACEMENT TOOLPOST STUD FOR BOXFORD LATHE
2. Boxford Quick Change Toolpost with 3 Standard Holders
3. ER25 COLLET 10-11 MM





SCT 10 pc ER25 Collet set & 2MT Holder (Ref: 41012001)

SCT 10 pc ER25 Collet set & 2MT Holder

Features:

Includes 1 collet chuck,1 clamping nut, & set of 10 ER25 collets and 1 spanner
Collet Sizes - 3,4,5,6,8,10,12,14,15,16 mm
Collet chuck tapped M10 for a drawbar
Packed in a plastic case
High precision collet chuck system suitable for all milling and drilling applications.
Wide holding range.
Accuracy:0.015mm



45.55 54.66


Quantity: 

People who bought SCT 10 pc ER25 Collet set & 2MT Holder also bought::

1. Set of 2 Toolmakers Clamps 2 1/2 "
2. Toolmakers Clamp 4"
3. Spare Profiling Insert





SCT 10 pc ER25 Collet set & 3MT Holder (Ref: 41012012)

SCT 10 pc ER25 Collet set & 3MT Holder

Features:

Includes 1 collet chuck,1 clamping nut, & set of 10 ER25 collets and 1 spanner
Collet Sizes - 3,4,5,6,8,10,12,14,15,16 mm
Collet chuck tapped M12 for a drawbar
Packed in a plastic case
High precision collet chuck system suitable for all milling and drilling applications.
Wide holding range.
Accuracy:0.015mm



45.55 54.66


Quantity: 

People who bought SCT 10 pc ER25 Collet set & 3MT Holder also bought::

1. ER32 COLLET 2-3 MM
2. Morse Taper Sleeves- MT3-MT4 Open Ended
3. 160mm 4 Jaw Independent Chuck





SCT 10 pc ER25 Collet set & INT30 Holder (Ref: 41012009)

SCT 10 pc ER25 Collet set & INT30 Holder

Features:

Includes 1 collet chuck,1 clamping nut, & set of 10 ER25 collets and 1 spanner
Collet Sizes - 3,4,5,6,8,10,12,14,15,16 mm
Collet chuck tapped M12 for a drawbar
Packed in a plastic case
High precision collet chuck system suitable for all milling and drilling applications.
Wide holding range.
Accuracy:0.015mm



45.55 54.66


Quantity: 





SCT 12 pc ER32 Collet set & MT3 Holder (Ref: 41011015)

SCT 12 pc ER32 Collet set & MT3 Holder

Features:

Includes 1 collet chuck,1 clamping nut, & set of 12 ER32 collets and 1 spanner
Collet Sizes - 3,4,5,6,8,10,12,14,15,16,18,20 mm
Collet chuck tapped M12 for a drawbar
Packed in a plastic case
High precision collet chuck system suitable for all milling and drilling applications.
Wide holding range.
Accuracy:0.015mm



56.00 67.20


Quantity: 

People who bought SCT 12 pc ER32 Collet set & MT3 Holder also bought::

1. SET OF 10 CCMT CARBIDE INSERTS TiN COATED (GOLD)
2. ER32 COLLET 18-19 MM
3. ER32 COLLET 16-17 MM





SCT 12 pc ER32 Collet set & R8 Holder (Ref: 410110154)

SCT 12 pc ER32 Collet set & R8 Holder

Features:

Includes 1 collet chuck,1 clamping nut, & set of 12 ER32 collets and 1 spanner
Collet Sizes - 3,4,5,6,8,10,12,14,15,16,18,20 mm
Collet chuck tapped 7/16 UNF for a drawbar
Packed in a plastic case
High precision collet chuck system suitable for all milling and drilling applications.
Wide holding range.
Accuracy:0.015mm



56.00 67.20


Quantity: 

People who bought SCT 12 pc ER32 Collet set & R8 Holder also bought::

1. NEW Z TYPE EDGE FINDER 4 mm
2. 3MT - JT3 Tang End Drill Chuck Arbor
3. Quality Drill Chuck 1 - 16 mm JT3





SCT Granite Surface Plate 300 x 300 x 70 MM SORRY OUT OF STOCK (Ref: 31122003)

SCT Granite Surface Plate 300 x 300 x 70 MM   SORRY OUT OF STOCK

Product features
Grade '00' workshop granite plate
Good temperature stability
Resistant to corrosion
Nonmagnetic
Distortion free
Excellent surface for accurate marking out

Description
Granite Surface Plates are made from select granite with uniform distribution of light and dark constituents offering greater wear resistance than cast iron equivalents. 
Granite plates have good temperature stability, are resistant to corrosion, are nonmagnetic and distortion free and make an 
excellent surface for accurate marking out. 


42.57 51.08



People who bought SCT Granite Surface Plate 300 x 300 x 70 MM SORRY OUT OF STOCK also bought::

1. Toolmakers Surface Gauge Small
2. 1 1/2 " MILD STEEL ROUND
3. Spare Insert for Grooving Tool





SCT Granite Surface Plate 400 x 250 x 80 MM SORRY OUT OF STOCK (Ref: 311220051)

SCT Granite Surface Plate 400 x 250 x 80 MM  SORRY OUT OF STOCK

Product features
Grade '00' workshop granite plate
Good temperature stability
Resistant to corrosion
Nonmagnetic
Distortion free
Excellent surface for accurate marking out

Description
Granite Surface Plates are made from select granite with uniform distribution of light and dark constituents offering greater wear resistance than cast iron equivalents. 
Granite plates have good temperature stability, are resistant to corrosion, are nonmagnetic and distortion free and make an 
excellent surface for accurate marking out. 


52.00 62.40



People who bought SCT Granite Surface Plate 400 x 250 x 80 MM SORRY OUT OF STOCK also bought::

1. HSS Screw Slotting saws
2. Set of 8 Soba HSS Lathe Tools 8mm Square Shanks
3. Height Gauge 8"/200mm





SCT Granite Surface Plate 400 x 400 x 100 MM SORRY OUT OF STOCK (Ref: 31122007)

SCT Granite Surface Plate 400 x 400 x 100 MM SORRY OUT OF STOCK

Product features
Grade '00' workshop granite plate
Good temperature stability
Resistant to corrosion
Nonmagnetic
Distortion free
Excellent surface for accurate marking out

Description
Granite Surface Plates are made from select granite with uniform distribution of light and dark constituents offering greater wear resistance than cast iron equivalents. 
Granite plates have good temperature stability, are resistant to corrosion, are nonmagnetic and distortion free and make an 
excellent surface for accurate marking out. 


84.28 101.14



People who bought SCT Granite Surface Plate 400 x 400 x 100 MM SORRY OUT OF STOCK also bought::

1. 2 Tonne Arbor Press
2. Stuarts Marking Paste (Tin)
3. MORSE TAPER 3 COLLET 5 MM





SCT Granite Surface Plate 450 x 450 x 100 MM SORRY OUT OF STOCK (Ref: 311220071)

SCT Granite Surface Plate 450 x 450 x 100 MM SORRY OUT OF STOCK

Product features
Grade '00' workshop granite plate
Good temperature stability
Resistant to corrosion
Nonmagnetic
Distortion free
Excellent surface for accurate marking out

Description
Granite Surface Plates are made from select granite with uniform distribution of light and dark constituents offering greater wear resistance than cast iron equivalents. 
Granite plates have good temperature stability, are resistant to corrosion, are nonmagnetic and distortion free and make an 
excellent surface for accurate marking out. 


89.00 106.80






BT40 COLLET CHUCK FOR ER25 COLLETS H70 (Ref: BT40ER2570)

BT40 COLLET CHUCK FOR ER25 COLLETS H70

Our BT40 ER Collet Chucks have a 5 micron run out accuracy & AT3 class taper.
Balanced Holder G6.3 with 15,000 RPM

Features:
AT3 class accuracy
Made from carburized alloy steel with case hardening and quench hardening heat,work surface hardnsll to HRC 53-57
"Taper accuracy AT3,ensure well contact with spindle cone for high speed running to protect the spindle."
All parts are precision fully ground for accurate fit
Offer more rigidity and better accuracy
Concentricity and runout accuracy </=0.005mm in high rpm.




D D1 L1
25 42 70 mm


17.99 21.59


Quantity: 





BT40 COLLET CHUCK FOR ER25 COLLETS H7100 (Ref: BT40ER25100)

BT40 COLLET CHUCK FOR ER25 COLLETS H7100

Our BT40 ER Collet Chucks have a 5 micron run out accuracy & AT3 class taper.
Balanced Holder G6.3 with 15,000 RPM

Features:
AT3 class accuracy
Made from carburized alloy steel with case hardening and quench hardening heat,work surface hardnsll to HRC 53-57
"Taper accuracy AT3,ensure well contact with spindle cone for high speed running to protect the spindle."
All parts are precision fully ground for accurate fit
Offer more rigidity and better accuracy
Concentricity and runout accuracy </=0.005mm in high rpm.




D D1 L1
25 42 100 mm


21.90 26.28


Quantity: 

People who bought BT40 COLLET CHUCK FOR ER25 COLLETS H7100 also bought::

1. HSS DRILL SET 50 pc 1-6mm x 0.1 mm
2. HSS DRILL SET 29 pc 1/16 - 1/2 x 64ths





BT40 COLLET CHUCK FOR ER32 COLLETS H70 (Ref: BT40ER3270)

BT40 COLLET CHUCK FOR ER32 COLLETS H70

Our BT40 ER Collet Chucks have a 5 micron run out accuracy & AT3 class taper.
Balanced Holder G6.3 with 15,000 RPM

Features:
AT3 class accuracy
Made from carburized alloy steel with case hardening and quench hardening heat,work surface hardnsll to HRC 53-57
"Taper accuracy AT3,ensure well contact with spindle cone for high speed running to protect the spindle."
All parts are precision fully ground for accurate fit
Offer more rigidity and better accuracy
Concentricity and runout accuracy </=0.005mm in high rpm.




D D1 L1
32 50 70 mm


17.99 21.59


Quantity: 

People who bought BT40 COLLET CHUCK FOR ER32 COLLETS H70 also bought::

1. SET OF 12 HSS TIN COATED COUNTERSINKS S
2. HSS SLOT DRILL 9.0 MM DIAMETER
3. HSS SLOT DRILL 10 MM DIAMETER





BT40 COLLET CHUCK FOR ER32 COLLETS H7100 (Ref: BT40ER32100)

BT40 COLLET CHUCK FOR ER32 COLLETS H7100

Our BT40 ER Collet Chucks have a 5 micron run out accuracy & AT3 class taper.
Balanced Holder G6.3 with 15,000 RPM

Features:
AT3 class accuracy
Made from carburized alloy steel with case hardening and quench hardening heat,work surface hardnsll to HRC 53-57
"Taper accuracy AT3,ensure well contact with spindle cone for high speed running to protect the spindle."
All parts are precision fully ground for accurate fit
Offer more rigidity and better accuracy
Concentricity and runout accuracy </=0.005mm in high rpm.




D D1 L1
25 50 100 mm


21.90 26.28


Quantity: 





BT40 COLLET CHUCK FOR ER40 COLLETS H70 (Ref: BT40ER4070)

BT40 COLLET CHUCK FOR ER40 COLLETS H70

Our BT40 ER Collet Chucks have a 5 micron run out accuracy & AT3 class taper.
Balanced Holder G6.3 with 15,000 RPM

Features:
AT3 class accuracy
Made from carburized alloy steel with case hardening and quench hardening heat,work surface hardnsll to HRC 53-57
"Taper accuracy AT3,ensure well contact with spindle cone for high speed running to protect the spindle."
All parts are precision fully ground for accurate fit
Offer more rigidity and better accuracy
Concentricity and runout accuracy </=0.005mm in high rpm.




D D1 L1
40 63 70 mm


17.99 21.59


Quantity: 

People who bought BT40 COLLET CHUCK FOR ER40 COLLETS H70 also bought::

1. BT40 COLLET CHUCK FOR ER40 COLLETS H7100





BT40 COLLET CHUCK FOR ER40 COLLETS H7100 (Ref: BT40ER40100)

BT40 COLLET CHUCK FOR ER40 COLLETS H7100

Our BT40 ER Collet Chucks have a 5 micron run out accuracy & AT3 class taper.
Balanced Holder G6.3 with 15,000 RPM

Features:
AT3 class accuracy
Made from carburized alloy steel with case hardening and quench hardening heat,work surface hardnsll to HRC 53-57
"Taper accuracy AT3,ensure well contact with spindle cone for high speed running to protect the spindle."
All parts are precision fully ground for accurate fit
Offer more rigidity and better accuracy
Concentricity and runout accuracy </=0.005mm in high rpm.




D D1 L1
40 63 100 mm


21.90 26.28


Quantity: 

People who bought BT40 COLLET CHUCK FOR ER40 COLLETS H7100 also bought::

1. BT40 COLLET CHUCK FOR ER40 COLLETS H70





12 MM Shank Clamp Type Knurling Tool for Variable Speed Mini Lathe etc (Ref: OS10130.)

12 MM Shank Clamp Type Knurling Tool for Variable Speed Mini Lathe etc

12mm Clamp Type Knurling Tool
NEW ! - IDEAL FOR CLARKE CL300 , SIEG AND MOST OTHER SMALL MINI LATHES

CLICK THE IMAGE FOR A LARGER PICTURE

This 12mm Clamp Type Knurling Tool fits any 12mm lathe tool post and is positioned so the knurling clamp above and below the centre of the work- Much better than pushing against the work !

The self-centring mechanism for a nice even finish

Knurling Wheel Diameter: 26mm.
Maximum Knurling Diameter: 25mm.
Fitted with Medium Diamond Pattern Knurls



26.00 31.20


Quantity: 

People who bought 12 MM Shank Clamp Type Knurling Tool for Variable Speed Mini Lathe etc also bought::

1. MINI LATHE METAL HANDWHEEL AND KNOB ACCESSORY SET UPGRADE
2. Large Clamp Type Knurling Tool
3. 3/4" Bent Lathe Dog





ALSGS Power Feed Attachment For Milling Machines X Axis 240 V (Ref: AL510SX)

ALSGS Power Feed Attachment For Milling Machines X Axis 240 V

Click Here to View the Manual

NEW ! 240 V POWER FEED - STANDARD 3 PIN PLUG - NO TRANSFORMER REQUIRED

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE

These power table feeders are easily fitted to many of today's popular milling machines especiall y Bridgeports etc .
Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. .

Specifications
Model R.P.M Max.R.P.M Max. Torque Voltage
SCT-AL510SX 0-200 200 650 in/lb 240v

Features
Functions with low noise, large torque, & high speed, Easy convenient installation
and flexible operation,.

Functional Overview
1.Model SCT-AL510SX
This power feed is designed to
install on the right side of a knee mill table to provide powered longitudinal movement of the table.


A. Limit Switch: Stops powered table movement
when either limit stop presses a plunger
on the switch.

B. Limit Stop: Activates the limit switch. Secure
these devices along the table to set the range
of movement.

C. Rapid Movement Button: Moves the table
at the maximum speed in the direction selected.

D. Direction Lever: Starts, reverses, and stops
longitudinal table movement.

E. Speed Dial: Controls the speed that the table
moves—turn the dial clockwise to increase
the speed.

F. Reset Button: When a current over 3.5
amps passes through the unit for more than
10 seconds, the internal circuit switch will cut
the power to the unit. I nvestigate and resolve
any problems, then use this button to reset
the internal circuit switch.

G. ON/OFF Switch: The master power switch
for the power feed.

H. Power Lamp: Lights when the power feed is
turned ON.




265.00 318.00


Quantity: 

People who bought ALSGS Power Feed Attachment For Milling Machines X Axis 240 V also bought::

1. 5 Litres Multicut Soluble Oil
2. Solid Morse Taper Socket 2MT x 25mm Diameter
3. 2 MT TEST BAR TSB2





SOBA 2" Boring Head Complete with Tools INT 40 Shank Metric (Ref: 17113040)

SOBA 2

Superb 2" boring head supplied with 5 HSS 12 mm Dia boring tools.

Complete in Storage Case

Tapped 16 mm for a drawbar






CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE


78.00 93.60


Quantity: 

People who bought SOBA 2" Boring Head Complete with Tools INT 40 Shank Metric also bought::

1. HSS SLOT DRILL 8.0 MM DIAMETER
2. HSS SLOT DRILL 6.0 MM DIAMETER
3. HSS SLOT DRILL 5.0 MM DIAMETER





SOBA 2" Boring Head Complete with Tools R8 Shank Metric (Ref: 1711308)

SOBA 2

Superb 2" boring head supplied with 5 HSS 12 mm Dia boring tools.

Supplied in a plastic storage case

Tapped 7/16 for a drawbar


CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE





70.71 84.85


Quantity: 





SOBA 2" Boring Head Complete with Tools INT 30 Shank Metric (Ref: 17113030)

SOBA 2

Superb 2" boring head supplied with 5 HSS 12 mm Dia boring tools.

Supplied in a plastic storage case

Tapped M12 for a drawbar


CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE





70.71 84.85


Quantity: 





SOBA 2" Boring Head Complete with Tools 2MT Metric (Ref: 1711302)

SOBA 2

Superb 2" boring head supplied in a plastic storage box with 5 HSS 12 mm Dia boring tools.
Tapped 10 mm For a Drawbar



CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE










64.16 76.99


Quantity: 





SOBA 2" Boring Head Complete with Tools 3MT Metric  (Ref: 1711303M)

SOBA 2

Superb 2" boring head supplied in a plastic storage box with 5 HSS 12 mm Dia boring tools.
Tapped M12 For a Drawbar

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE







64.16 76.99


Quantity: 

People who bought SOBA 2" Boring Head Complete with Tools 3MT Metric also bought::

1. Glanze 3MT Indexable Endmill 50mm Head
2. 4 Jaw Independent Chuck for CL500 & 430
3. 80 MM Precision Drill Press Vice





Hydraulic Power Machine Vice 100 mm (Ref: 220002)

Hydraulic Power Machine Vice 100 mm

Hydraulic machine vice with swivel base

100 MM JAW WIDTH MODEL 220-002

Features:

· Solid structure for milling, drilling and grinding
· Vice body made of high quality casting which resists deflection or bending
· Hardened and ground guide surfaces
· Hardened and ground clamping jaws,
· Booster system, little effort, high pressing power when clamping
· Protected spindle which magnifies a small force into an enormous clamping force
· Large clamping range due to locking bolts with different hole spacings
· With swivel base, 360° turnable







299.25 359.10


Quantity: 





Hydraulic Power Machine Vice 125 mm (Ref: 220003)

Hydraulic Power Machine Vice  125 mm

Hydraulic machine vice with swivel base

125 MM JAW WIDTH MODEL 220-003

Features:

· Solid structure for milling, drilling and grinding
· Vice body made of high quality casting which resists deflection or bending
· Hardened and ground guide surfaces
· Hardened and ground clamping jaws,
· Booster system, little effort, high pressing power when clamping
· Protected spindle which magnifies a small force into an enormous clamping force
· Large clamping range due to locking bolts with different hole spacings
· With swivel base, 360° turnable







352.00 422.40


Quantity: 





Hydraulic Power Machine Vice 155 mm (Ref: 220001)

Hydraulic Power Machine Vice  155 mm

Hydraulic machine vice with swivel base

155 MM JAW WIDTH MODEL 220-001

Features:

· Solid structure for milling, drilling and grinding
· Vice body made of high quality casting which resists deflection or bending
· Hardened and ground guide surfaces
· Hardened and ground clamping jaws,
· Booster system, little effort, high pressing power when clamping
· Protected spindle which magnifies a small force into an enormous clamping force
· Large clamping range due to locking bolts with different hole spacings
· With swivel base, 360° turnable







391.15 469.38


Quantity: 

People who bought Hydraulic Power Machine Vice 155 mm also bought::

1. Multifix 5pc 40 Position Quick Change Toolpost 150 - 300 Swing





Multifix 5pc 40 Position Quick Change Toolpost 120 - 220 Swing (Ref: OSA0)

Multifix 5pc 40 Position Quick Change Toolpost 120 - 220 Swing

5 pc 40 position quick change tool post and holders (Europe style)
CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTIRE

FEATURES
1. Cam-lock handle rigidity locks & quickly releases the tool holder

2. Correct height of cutting edge is easily & accurately adjusted by special set screws
3. Tools can be reground without removal form tool holder so the setting remains unaltered

4. 40 different angles are conveniently selected from position dials with marker

5. Holders are interchangeable with most other brands of 40 position tool post

6.Tool Post:HRC 50±2 degree after heat-treatment

Toolholder:HRC 42±2 degree after heat-treatment

DESIGN:
1.Basic body and tool holder are made of high-quality steel
which is hardened and ground

2.The tool holder is clamped against the basic body by an eccentric cam system
The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder.
Application:
Quick-change tool holders are characteried by their unlimited diversity in th use of lathe tools,drills,reamers and boring bars.

Includes 3 standard holders & one boring holder









183.08 219.70


Quantity: 

People who bought Multifix 5pc 40 Position Quick Change Toolpost 120 - 220 Swing also bought::

1. Set Telescopic Bore Gauges
2. Spare Toolholder for OSA0 Multifix Quick Change Toolpost
3. Multifix 5pc 40 Position Quick Change Toolpost 150 - 300 Swing


Related products:
1. Spare Toolholder for OSA0 Multifix Quick Change Toolpost (Ref: 540010)





Spare Toolholder for OSA0 Multifix Quick Change Toolpost (Ref: 540010)

Spare Toolholder for OSA0 Multifix Quick Change Toolpost

Spare Toolholder for OSA0 Multifix Quick Change Toolpost




26.33 31.60


Quantity: 

People who bought Spare Toolholder for OSA0 Multifix Quick Change Toolpost also bought::

1. Multifix 5pc 40 Position Quick Change Toolpost 120 - 220 Swing





Multifix 5pc 40 Position Quick Change Toolpost 150 - 300 Swing (Ref: OSA1)

Multifix 5pc 40 Position Quick Change Toolpost 150 - 300 Swing

5 pc 40 position quick change tool post and holders (Europe style)
CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTIRE

FEATURES
1. Cam-lock handle rigidity locks & quickly releases the tool holder

2. Correct height of cutting edge is easily & accurately adjusted by special set screws
3. Tools can be reground without removal form tool holder so the setting remains unaltered

4. 40 different angles are conveniently selected from position dials with marker

5. Holders are interchangeable with most other brands of 40 position tool post

6.Tool Post:HRC 50±2 degree after heat-treatment

Toolholder:HRC 42±2 degree after heat-treatment

DESIGN:
1.Basic body and tool holder are made of high-quality steel
which is hardened and ground

2.The tool holder is clamped against the basic body by an eccentric cam system
The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder.
Application:
Quick-change tool holders are characteried by their unlimited diversity in th use of lathe tools,drills,reamers and boring bars.

Includes 3 standard holders & one boring holder









220.00 264.00


Quantity: 

People who bought Multifix 5pc 40 Position Quick Change Toolpost 150 - 300 Swing also bought::

1. Multifix 5pc 40 Position Quick Change Toolpost 120 - 220 Swing
2. Dasqua Metric Dial Test Indicator with Twice the Range !
3. Hydraulic Power Machine Vice 155 mm


Related products:
1. Spare Toolholder for OSA1 Multifix Quick Change Toolpost SORRY OUT OF STOCK (Ref: 540115)





Spare Toolholder for OSA1 Multifix Quick Change Toolpost SORRY OUT OF STOCK (Ref: 540115)

Spare Toolholder for OSA1 Multifix Quick Change Toolpost SORRY OUT OF STOCK

Spare Toolholder for OSA0 Multifix Quick Change Toolpost





28.87 34.64






Multifix 5pc 40 Position Quick Change Toolpost 200 - 400 Swing (Ref: OSE5)

Multifix 5pc 40 Position Quick Change Toolpost 200 - 400 Swing

5 pc 40 position quick change tool post and holders (Europe style)
CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTIRE

FEATURES
1. Cam-lock handle rigidity locks & quickly releases the tool holder

2. Correct height of cutting edge is easily & accurately adjusted by special set screws
3. Tools can be reground without removal form tool holder so the setting remains unaltered

4. 40 different angles are conveniently selected from position dials with marker

5. Holders are interchangeable with most other brands of 40 position tool post

6.Tool Post:HRC 50±2 degree after heat-treatment

Toolholder:HRC 42±2 degree after heat-treatment

DESIGN:
1.Basic body and tool holder are made of high-quality steel
which is hardened and ground

2.The tool holder is clamped against the basic body by an eccentric cam system
The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder.
Application:
Quick-change tool holders are characteried by their unlimited diversity in th use of lathe tools,drills,reamers and boring bars.

Includes 3 standard holders & one boring holder









262.46 314.95


Quantity: 

People who bought Multifix 5pc 40 Position Quick Change Toolpost 200 - 400 Swing also bought::

1. Set of 16 mm Glanze Mini Indexable Turning Tools with Larger CCMT09 Insert
2. Wavy Parallels
3. PP-U3 Cutter & Tool Grinder


Related products:
1. Spare Toolholder for OSE5 Multifix Quick Change Toolpost (Ref: 540211)





Spare Toolholder for OSE5 Multifix Quick Change Toolpost  (Ref: 540211)

Spare Toolholder for OSE5 Multifix Quick Change Toolpost

Spare Toolholder for OSE5 Multifix Quick Change Toolpost






38.77 46.52


Quantity: 

People who bought Spare Toolholder for OSE5 Multifix Quick Change Toolpost also bought::

1. Toolmakers Clamp 4"
2. Spare Blade For Glanze parting tool 20 mm wide for 3 mm inserts
3. 1-2-3 Blocks





SCT Round Magnetic Chuck 125 mm Diameter (Ref: X51125)

SCT Round Magnetic Chuck 125 mm Diameter

Round steel permanent-magnetic chuck

Features
1 .Micro pitch permanent magnetic chuck with P:1.5+0.5 mm
2 Extremely low height due to use of neodymiumiron-boron magnets
3. Pole pitch:steel 1.5 mm,brass:0.5mm
4. Nominal holding force:100-120 (N/cm2)(JIS)
5. Pole plate wearing limit:5mm
6. Magnetic field height:8mm
7. Weight 4.6 kg

Application:
The round Micro pitch permanent magnetic chuck is suitable for grinding application, Ideal for smaller and thinner workpiece.



187.33 224.80


Quantity: 





SCT Round Magnetic Chuck 160 mm Diameter (Ref: X51160)

SCT Round Magnetic Chuck 160 mm Diameter

Round steel permanent-magnetic chuck

Features
1 .Micro pitch permanent magnetic chuck with P:1.5+0.5 mm
2 Extremely low height due to use of neodymiumiron-boron magnets
3. Pole pitch:steel 1.5 mm,brass:0.5mm
4. Nominal holding force:100-120 (N/cm2)(JIS)
5. Pole plate wearing limit:5mm
6. Magnetic field height:8mm
7. Weight 4.6 kg

Application:
The round Micro pitch permanent magnetic chuck is suitable for grinding application, Ideal for smaller and thinner workpiece.





218.80 262.56


Quantity: 





SCT Rectangular Magnetic Chuck 300 x 150 mm x 48 mm (Ref: SC1530)

SCT Rectangular Magnetic Chuck  300 x 150 mm x 48 mm

Rectangle steel permanent-magnetic chuck

Features:
1.Micro pitch permanent magnetic chuck with P:1.5+0.5 mm
2.Srong magnatic force and less remaining magnetic.
3.Coolant water proof structure.
4.Pole pitch:steel 1.5 mm,brass:0.5mm
5.Nominal holding force:100-120 (N/cm2)(JIS)
6.Pole plate wearing limit:5mm
7.Magnetic field geight:8mm

CLICK THE IMAGE FOR A LARGER PICTURE

Applications:
Suitable for grinding and EDM applications.







178.65 214.38


Quantity: 





SCT Rectangular Magnetic Chuck 350 x 150 mm x 48 mm *** SPECIAL OFFER*** (Ref: SC1535)

SCT Rectangular Magnetic Chuck  350 x 150 mm x 48 mm *** SPECIAL OFFER***

Rectangle steel permanent-magnetic chuck

Features:
1.Micro pitch permanent magnetic chuck with P:1.5+0.5 mm
2.Srong magnatic force and less remaining magnetic.
3.Coolant water proof structure.
4.Pole pitch:steel 1.5 mm,brass:0.5mm
5.Nominal holding force:100-120 (N/cm2)(JIS)
6.Pole plate wearing limit:5mm
7.Magnetic field geight:8mm

CLICK THE IMAGE FOR A LARGER PICTURE

Applications:
Suitable for grinding and EDM applications.







165.83 199.00


Quantity: 





MG-8 CAM TYPE STAINLESS STEEL WELDING GAUGE  (Ref: 30291001)

MG-8 CAM TYPE STAINLESS STEEL WELDING GAUGE

MG-8 CAM TYPE WELDING GAUGE

Product Description:

1).Suitable for measuring the Depth of undercut,excess weld metal (capping size), fillet length,fillet weld throat size ,
angle of preparation (0-60°) and misalignment.

2).This gauge is intended for general dimensional inspection of welded
fabrications where close tolerances are not expected.

3).Measurements are possible in either inches or millimeters

4).Made from stainless steel

Product Features

All the scales on the gauge are clear and easy to read
Made from stainless steel, not easy to rust and not easy to bend
The measurements of the gauge can be inches or millimeters
General Linear Measurements up to 2" (50mm)
Bridge cam welding gauge mg-8, weld gauge, welding gage





STORAGE BOX AND INSTRUCTIONS INCLUDED



12.99 15.59


Quantity: 





Welding Gauge Model 40 (Ref: 31284001)

Welding Gauge Model 40

WELDING GAGE

Made of stainless steel
Portable and compact s,easy to use with a wide range of applications

Suitable for measuring the height,bevel angle,width ,gap and undercut depth of welds..
"They are suitable for manufacturing boilers, bridges, chemical machinery, and ships and for inspecting the welding quality of pressure vessels."

Complete with storage box and instructions

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE

Thickness of welding 40mm
Height of flat and fillet weld 12mm
Thickness of fillet weld 15mm
Width of weld seam 40mm
Bevelangle of weldment 90~150°
Undercut depth of weld seam 0~5mm
Gap size 0.5~5mm
Accuracy 0.2 mm





10.59 12.71


Quantity: 





Welding Gauge Model 40B (Ref: 31284002)

Welding Gauge Model 40B

WELDING GAGE

Made of stainless steel

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE


The Gauge consists of four components:main scale,height gauge,undercut depth gauge and multiple-purpose gauge and is specially used fot the measutement of the bevel angle,heighr,width,gapand undercut depth of weldment,suitable for the detection of boilers,bridges,ships,pressure vessels and oil piles.

It is made of stainless steel is portable and compact and easy to use ,covers a wide range of applications.







8.63 10.36


Quantity: 





MG-11 Weld Fillet Gauge (Ref: 302090001)

MG-11 Weld Fillet Gauge

2.MG-11 WELD FILLET GAGE

Description:

- Gauge is made of stainless steel

- It is miniature and light weight, and can be easily carried in your pocket

- Permits quick and accurate measuring of the most popular weld fillet sizes in imperial:1/8"-1" and metric:(3.2-25.4mm)

- All sizes and numerals are etched into the surface for clarity and easier reading.

- Use for: checking fillet leg size; checking fillet throat size



Specification:

- Material: Stainless Steel

- Length: Approx. 102mm / 4.02inch

COMPLETE WITH STORAGE WALLET & INSTRUCTIONS









7.25 8.70


Quantity: 





Hi - Lo Welding Gauge (Ref: 30284003)

Hi - Lo Welding Gauge

Hi-lo Welding Gauge for Internal Alignment

Hi-Lo gauge. Measures internal , Fit-up gap, Bevel on Pipe and Plate end preparation, Crown height, and Pipe and Plate wall thickness.Fit-up gap; Internal misalignment; Weld crown height; Scribe line, socket welds; Fillet weld size; Pipe wall thickness; Angle of bevel on end preperation to an accuracy of 0.8 mm (1/32”).It is widely used in oil pile inspection.
.
Features:
Hardened steel,
High Accuracy.
Highly polished surface.
Measurements read Imperial one side, Metric opposite side
With Lock screw.

COMPLETE WITH STORAGE CASE & INSTRUCTIONS



12.95 15.54


Quantity: 





3" Rotary Table With 65 mm 3 Jaw Chuck & Clamping Kit  (Ref: 111052)

3

NEW 3"/ 80 MM SOBA ROTARY TABLE COMPLETE WITH CHUCK & CLAMPING KIT

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear.



94.00 112.80


Quantity: 

People who bought 3" Rotary Table With 65 mm 3 Jaw Chuck & Clamping Kit also bought::

1. Wingnut Type Pin Vice
2. A Section Pulley - 2" Diameter with a 5/8 Hole
3. 70 MM 4 Jaw Independent Chuck on Backplate for 3 & 4" Rotary Tables





3" Rotary Table With 65 mm 4 Jaw Self Centering Chuck & Clamping Kit  (Ref: 111053)

3

NEW 3"/ 80 MM SOBA ROTARY TABLE COMPLETE WITH CHUCK & CLAMPING KIT

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear.



96.46 115.75


Quantity: 




Soba 4 5/16 " / 115 mm HV4 Rotary Table Set

Soba 4 5/16
Ref: 111010
NEW - COMPLETE ROTARY TABLE SET - INCLUDES ROTARY TABLE , TAILSTOCK , DIVIDING PLATES SET & CLAMPING KIT !

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE



ROTARY TABLE
These tables have a totally ground finish which provides high precision and smooth rotation - everything you would expect from Shobha. The centre of the table is fitted to an inner conical Morse tapered sleeve MT2.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing.. Table diameter - 110 mm - Table height - 80 mm - Centre height - 80mm - Centre sleeve - 2MT.3 T slots

TAILSTOCK

.
Substantial construction
Centre height from 80 to 110mm
Base size 130 x 95mm
A substantially made tailstock with centre height adjustable over the range 80 to 110mm, . The base size is 130 x 95mm and there are 15mm wide slots at the two ends for securing it to the machine table

DIVIDING SET

This excellent dividing attachment can easily be fitted to the HV6 rotary table and includes three plates as follows.
A Plate - 15,16,17,18,19,20
B Plate - 21,23,27,29,31,33
C Plate - 37,39,41,43,47,49
Also included are all necessary screws,washers & handle etc. to fit.


CLAMPING KIT

This set is suitable for both the Vertex and Soba 6" Rotary tables. The set comprises 4 x Tnuts with matching 3" studs and nuts. 2 x 2" stepped clamps and 2 x 1 3/4 slotted step clamps!
Exclusive to Chronos !
151.96 182.35


Quantity:  



People who bought Soba 4 5/16 " / 115 mm HV4 Rotary Table Set also bought::

1. 1/2" Bent Lathe Dog
2. Soba Combined Clamping Kit 52 pcs M6 & M8 SORRY OUT OF STOCK
3. Set of 8 HSS Lathe Tools 12 mm Square Shanks

Soba 4 5/16 " / 115 mm HV4 Rotary Table Set & Chuck (Ref: 111011)

Soba 4 5/16

NEW - COMPLETE ROTARY TABLE SET - INCLUDES ROTARY TABLE , TAILSTOCK , DIVIDING PLATES SET & CLAMPING KIT PLUS A 4 JAW SELF CENTERING CHUCK !

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE



ROTARY TABLE
These tables have a totally ground finish which provides high precision and smooth rotation - everything you would expect from Shobha. The centre of the table is fitted to an inner conical Morse tapered sleeve MT2.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing.. Table diameter - 110 mm - Table height - 80 mm - Centre height - 80mm - Centre sleeve - 2MT.3 T slots

TAILSTOCK

.
Substantial construction
Centre height from 80 to 110mm
Base size 130 x 95mm
A substantially made tailstock with centre height adjustable over the range 80 to 110mm, . The base size is 130 x 95mm and there are 15mm wide slots at the two ends for securing it to the machine table

DIVIDING SET

This excellent dividing attachment can easily be fitted to the HV6 rotary table and includes three plates as follows.
A Plate - 15,16,17,18,19,20
B Plate - 21,23,27,29,31,33
C Plate - 37,39,41,43,47,49
Also included are all necessary screws,washers & handle etc. to fit.


CLAMPING KIT

This set is suitable for both the Vertex and Soba 6" Rotary tables. The set comprises 4 x Tnuts with matching 3" studs and nuts. 2 x 2" stepped clamps and 2 x 1 3/4 slotted step clamps!
Exclusive to Chronos !

CHUCK
A Soba 80 mm Diameter 4 Jaw Self Centering Chuck on a mounting plate

220.76 264.91


Quantity: 

People who bought Soba 4 5/16 " / 115 mm HV4 Rotary Table Set & Chuck also bought::

1. NEW ! Soba 5" / 125 mm Rotary Table , Chuck , Dividing Set & Tailstock Kit





PP-13C Expert Drill Sharpening Machine 3 - 13 mm  (Ref: PP13C)

PP-13C Expert Drill Sharpening Machine 3 - 13 mm

CLICK HERE FOR THE INSTRUCTION MANUAL

NEW SUPERB SELF CONTAINED DRILL SHARPENING MACHINE

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE

Easy operation for precise & cost effective grinding of two flute spiral HSS drill bits.

Allows easy sharpening of your drill bits without previous knowledge or skill in grinding

Easy to transport being only 9.5 KG and with built in carry handle

Includes Diamond grinding stone for long durability and perfect grinding

Complete with 11 ER20 Collets covering the range 3 - 13 mm

The edges of the drillbits are fixed in the collet chuck holder by means of the adjustment aid ensuring perfect positioning

SPECIFICATION

Speed - 5300 RPM
Angle of Sharpening - 90 - 135 Degrees
Range - 3- 13mm
Power - 180W Single Phase 230v Standard 3 Pin Plug
Dimensions (LXWXH) - 31 x 18 x 19 cm
Weight 9.5 KG






279.00 334.80


Quantity: 

People who bought PP-13C Expert Drill Sharpening Machine 3 - 13 mm also bought::

1. Morse Taper Sleeves- MT1-MT3 Tang End
2. Morse Taper Sleeves- MT2-MT3 Tang End
3. Spare Grinding Wheel For PP-13C Expert Drill Sharpening Machine





Universal Magnetic Stand - New Design with Fine Adjustment 80 KG  (Ref: 71220030)

Universal Magnetic Stand - New Design with Fine Adjustment 80 KG

LATEST TYPE MAGNETIC BASE

With this new design fine adjustment on the top of the base , you can more easily adjust and stabilize the position the Dial Gauge or Dial Indicator, This is much more user friendly and positive compared to the old ordinary adjustment on the stem



1. Magnetic base with On/Off switch
2. Magnetic base with new design fine adjustment
3. Dovetail groove for test indicator
4. Clamp hole 8mm(optional hole 3/8")
5. Aluminium alloy stem

Base- 45 x 60 x 55 mm
Upright Arm 135 mm
Horizontal Arm - 110 mm
Strong 80 KG Magnet with on off Switch




27.38 32.86


Quantity: 

People who bought Universal Magnetic Stand - New Design with Fine Adjustment 80 KG also bought::

1. Universal Magnetic Stand - New Design with Fine Adjustment 100 KG
2. Quality Drill Chuck 1 - 13 mm with 3 MT Arbor
3. Pack of 5 Pcs HSS Toolsteel 1/2 Square x 4 " Long





Dasqua Magnetic Base with Fine Adjustment 100 KG Stainless Steel Model (Ref: 71210015)

Dasqua Magnetic Base with Fine Adjustment 100 KG Stainless Steel Model

PROFESSIONAL MODEL

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE


V-grooved base for ease of mount on cylindrical parts also.
Chrome plate stainless steel rods.
Powerfull Locking System
Horizontal or vertical posistioning capability.
Black finish on non-working surfaces.
Fine quality permanent magnet.
Horizontal or vertical posistioning capability.
Smooth and easy on/off switch.

HOLDING POWER - 100 KG
MAIN POLE - 16 MM DIA X 250 MM LONG
SUB POLE - 14 MM DIA X 180 MM LONG
CLAMP HOLE DIA - 8/6MM OD
BASE - 73 X 50 X 55 MM




32.15 38.58


Quantity: 

People who bought Dasqua Magnetic Base with Fine Adjustment 100 KG Stainless Steel Model also bought::

1. Electronic Digital Dial Gauge
2. Long Travel Dial Gauge 0-2" x 0.001"
3. Dasqua Dial Test Indicator Set Imperial with Holders





NEW ! Soba 5" / 125 mm Rotary Table , Dividing Set & Tailstock Kit  (Ref: 111025)

NEW ! Soba 5

CLICK HERE FOR MORE INFO !

FANTASTIC OFFER- PRICE INCLUDES THE ROTARY TABLE , SET OF 3 DIV PLATES TAILSTOCK, AND A CLAMPING KIT
They have a totally ground finish which provides high precision and smooth rotation - The centre of the table is fitted to an inner conical Morse tapered MT2 sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing.

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE

197.33 236.80


Quantity: 

People who bought NEW ! Soba 5" / 125 mm Rotary Table , Dividing Set & Tailstock Kit also bought::

1. New 4 Jaw Chuck on Mounting Plate for 4" Table
2. Morse Taper Sleeves- MT2-MT3 Tang End
3. SCT 6" Angle Plates Webbed End SORRY OUT OF STOCK





NEW ! Soba 5" / 125 mm Rotary Table , Chuck , Dividing Set & Tailstock Kit  (Ref: 111026)

NEW ! Soba 5

CLICK HERE FOR MORE INFO !

FANTASTIC OFFER- PRICE INCLUDES THE ROTARY TABLE , SET OF 3 DIV PLATES TAILSTOCK, AND A CLAMPING KIT
They have a totally ground finish which provides high precision and smooth rotation - The centre of the table is fitted to an inner conical Morse tapered MT2 sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing.

80 mm 4 Jaw Self Centering Chuck & Backplate included

CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE




243.00 291.60


Quantity: 

People who bought NEW ! Soba 5" / 125 mm Rotary Table , Chuck , Dividing Set & Tailstock Kit also bought::

1. 1 Litre of Multispec Slideway Oil
2. Set of Solid Carbide Endmills
3. 3"/80 mm Engineers Square





SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK & 4 JAW S/C CHUCK  (Ref: 111016)

SOBA 6

Click Here for User Manual

FANTASTIC OFFER- PRICE INCLUDES THE ROTARY TABLE , SET OF 3 DIV PLATES TAILSTOCK, AND A CLAMPING KIT- PLUS A 100 MM 4 JAW SELF CENTERING CHUCK

They have a totally ground finish which provides high precision and smooth rotation - The centre of the table is fitted to an inner conical Morse tapered MT2 sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing. . Table diameter - 150 mm - Table height - 80 mm - Centre height - 105mm - Centre sleeve - 2MT.4 T slots. OUR TABLE IS SUPPLIED WITH AN 8 PAGE FULL MANUAL - NOT AVAILABLE FROM OTHER SUPPLIERS!

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE





281.54 337.85


Quantity: 

People who bought SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK & 4 JAW S/C CHUCK also bought::

1. SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK etc





New Soba 4" / 100 MM Rotary Table c/w Tailstock , Clamp Kit & Chuck (Ref: 111055)

New Soba 4

New Set !


Overall height of table under 2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 2 1/16 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear. A set of suitable T nuts, studs and clamps is now included !

2 x Slotted Clamps 40mm x 20 mm
2 x 6mm Studs 50 mm long with nuts
2 x step clamps 25 x 15 mm


Also Includes a 146025 80 mm 4 Jaw independent Chuck plus a tailstock







119.16 142.99


Quantity: 

People who bought New Soba 4" / 100 MM Rotary Table c/w Tailstock , Clamp Kit & Chuck also bought::

1. 3" Open Angle Plate
2. Proxxon Die-cast aluminium compound table KT 150 474334





New Soba 3" Rotary Table c/w 4 Jaw Chuck , Tailstock & Clamping Kit (Ref: 111050)

New Soba 3

AS ABOVE BUT WITH A 146105 - 70 MM 4 JAW INDEPENDENT CHUCK

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear.
Clamping Kit also included

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE



117.85 141.42


Quantity: 

People who bought New Soba 3" Rotary Table c/w 4 Jaw Chuck , Tailstock & Clamping Kit also bought::

1. 3" Rotary Table Adaptor with Myford Thread
2. Flycutter Suitable for Unimat 3 Lathes M14 x 1 thread
3. 3" Rotary Table With 70 mm 4 Jaw Chuck





Linear Optical DRO Glass Readout Scale DC10F 200 mm (Ref: 40135220)

Linear Optical DRO Glass Readout Scale DC10F  200 mm

Click Here for the Installation manual

1 X 200 MM SLIM BODY OPTICAL DRO READOUT SCALE



In General

200 mm MEASURING LENGTH

These new Digital readout systems are a great addition to your lathe or milling machine . They are very accurate and can be used in conjunction with our new 2 & 3 Axis readout displays

Complete with all mounting accessories for you to adapt to your particular machine and a comprhensive installation manual .


They scales are completely swarf and water proof

Specification

Linear glass optical.
Completely swarf and coolant proof.
Compact 18mm scale section, ideal for smaller lathes and mills.
Compact design so as to be unobtrusive when fitted
Working temperature: 10°C - 60°C.
Professional quality and includes all mouting accessories and cables
Easy to use and very accurate
Various sizes available
Compatible with a wide range of different lathes and milling machines.

Voltage - DC5V (DC10-K DC5V-36V
Output Signal TTL EIA-422-A
Biggest Working Speed - 20m/min (1UM) 60m/min(5UM)
Working Temperature 10°C - 60°C
Storage Temperature 30°C - 70°C

Grating System - The transmissive and infrared optical measuring system.the infrared Wave length is 800nm.
9.Reading head sliding system Vertical or 45‹five precision bearing system
10.Measuring LengthF50mm-3000mm

BELOW - WITH OPTIONAL READOUT BOX

DIFFERENT LENGTHS AVAILABLE

INSTALLATION HARDWARE


THIS LISTING IS FOR 1 X SINGLE SCALE UNIT 200 MM SLIM BODY



61.00 73.20


Quantity: 

People who bought Linear Optical DRO Glass Readout Scale DC10F 200 mm also bought::

1. Multi Function Digital Readout Box 3 Axis
2. Multi Function Digital Readout Box 2 Axis
3. Linear Optical DRO Glass Readout Scale DC10 300 mm


Related products:
1. Multi Function Digital Readout Box 3 Axis (Ref: 40135910)
2. Multi Function Digital Readout Box 2 Axis (Ref: 40135905)





Linear Optical DRO Glass Readout Scale DC10 300 mm (Ref: 40135120)

Linear Optical DRO Glass Readout Scale DC10 300 mm

Click Here for the Installation manual

1 X 300 MM OPTICAL DRO READOUT SCALE



In General

300 mm MEASURING LENGTH

These new Digital readout systems are a great addition to your lathe or milling machine . They are very accurate and can be used in conjunction with our new 2 & 3 Axis readout displays

Complete with all mounting accessories for you to adapt to your particular machine and a comprhensive installation manual .


They scales are completely swarf and water proof

Specification

Linear glass optical.
Completely swarf and coolant proof.
Compact 18mm scale section, ideal for smaller lathes and mills.
Compact design so as to be unobtrusive when fitted
Working temperature: 10°C - 60°C.
Professional quality and includes all mouting accessories and cables
Easy to use and very accurate
Various sizes available
Compatible with a wide range of different lathes and milling machines.

Voltage - DC5V (DC10-K DC5V-36V
Output Signal TTL EIA-422-A
Biggest Working Speed - 20m/min (1UM) 60m/min(5UM)
Working Temperature 10°C - 60°C
Storage Temperature 30°C - 70°C

Grating System - The transmissive and infrared optical measuring system.the infrared Wave length is 800nm.
9.Reading head sliding system Vertical or 45‹five precision bearing system
10.Measuring LengthF50mm-3000mm

BELOW - WITH OPTIONAL READOUT BOX

DIFFERENT LENGTHS AVAILABLE

INSTALLATION HARDWARE


THIS LISTING IS FOR 1 X SINGLE SCALE UNIT 300 MM



70.84 85.01


Quantity: 

People who bought Linear Optical DRO Glass Readout Scale DC10 300 mm also bought::

1. Linear Optical DRO Glass Readout Scale DC10F 200 mm
2. Multi Function Digital Readout Box 3 Axis
3. Multi Function Digital Readout Box 2 Axis


Related products:
1. Multi Function Digital Readout Box 3 Axis (Ref: 40135910)
2. Multi Function Digital Readout Box 2 Axis (Ref: 40135905)





Linear Optical DRO Glass Readout Scale DC10 400 mm (Ref: 40135125)

Linear Optical DRO Glass Readout Scale DC10 400 mm

Click Here for the Installation manual

1 X 400 MM OPTICAL DRO READOUT SCALE



In General

400 mm MEASURING LENGTH

These new Digital readout systems are a great addition to your lathe or milling machine . They are very accurate and can be used in conjunction with our new 2 & 3 Axis readout displays

Complete with all mounting accessories for you to adapt to your particular machine and a comprhensive installation manual .


They scales are completely swarf and water proof

Specification

Linear glass optical.
Completely swarf and coolant proof.
Compact 18mm scale section, ideal for smaller lathes and mills.
Compact design so as to be unobtrusive when fitted
Working temperature: 10°C - 60°C.
Professional quality and includes all mouting accessories and cables
Easy to use and very accurate
Various sizes available
Compatible with a wide range of different lathes and milling machines.

Voltage - DC5V (DC10-K DC5V-36V
Output Signal TTL EIA-422-A
Biggest Working Speed - 20m/min (1UM) 60m/min(5UM)
Working Temperature 10°C - 60°C
Storage Temperature 30°C - 70°C

Grating System - The transmissive and infrared optical measuring system.the infrared Wave length is 800nm.
9.Reading head sliding system Vertical or 45‹five precision bearing system
10.Measuring LengthF50mm-3000mm

BELOW - WITH OPTIONAL READOUT BOX

DIFFERENT LENGTHS AVAILABLE

INSTALLATION HARDWARE


THIS LISTING IS FOR 1 X SINGLE SCALE UNIT 400 MM



75.00 90.00


Quantity: 

People who bought Linear Optical DRO Glass Readout Scale DC10 400 mm also bought::

1. Linear Optical DRO Glass Readout Scale DC10F 200 mm
2. Multi Function Digital Readout Box 3 Axis
3. Multi Function Digital Readout Box 2 Axis


Related products:
1. Multi Function Digital Readout Box 3 Axis (Ref: 40135910)
2. Multi Function Digital Readout Box 2 Axis (Ref: 40135905)





Linear Optical DRO Glass Readout Scale DC10 700 mm (Ref: 40135140)

Linear Optical DRO Glass Readout Scale DC10 700 mm

Click Here for the Installation manual

1 X 700 MM OPTICAL DRO READOUT SCALE



In General

700 mm MEASURING LENGTH

These new Digital readout systems are a great addition to your lathe or milling machine . They are very accurate and can be used in conjunction with our new 2 & 3 Axis readout displays

Complete with all mounting accessories for you to adapt to your particular machine and a comprhensive installation manual .


They scales are completely swarf and water proof

Specification

Linear glass optical.
Completely swarf and coolant proof.
Compact 18mm scale section, ideal for smaller lathes and mills.
Compact design so as to be unobtrusive when fitted
Working temperature: 10°C - 60°C.
Professional quality and includes all mouting accessories and cables
Easy to use and very accurate
Various sizes available
Compatible with a wide range of different lathes and milling machines.

Voltage - DC5V (DC10-K DC5V-36V
Output Signal TTL EIA-422-A
Biggest Working Speed - 20m/min (1UM) 60m/min(5UM)
Working Temperature 10°C - 60°C
Storage Temperature 30°C - 70°C

Grating System - The transmissive and infrared optical measuring system.the infrared Wave length is 800nm.
9.Reading head sliding system Vertical or 45‹five precision bearing system
10.Measuring LengthF50mm-3000mm

BELOW - WITH OPTIONAL READOUT BOX

DIFFERENT LENGTHS AVAILABLE

INSTALLATION HARDWARE


THIS LISTING IS FOR 1 X SINGLE SCALE UNIT 700 MM



99.00 118.80


Quantity: 

People who bought Linear Optical DRO Glass Readout Scale DC10 700 mm also bought::

1. Linear Optical DRO Glass Readout Scale DC10F 200 mm
2. Edge Finder Set
3. Multi Function Digital Readout Box 3 Axis


Related products:
1. Multi Function Digital Readout Box 3 Axis (Ref: 40135910)
2. Multi Function Digital Readout Box 2 Axis (Ref: 40135905)





Linear Optical DRO Glass Readout Scale DC10 800 mm (Ref: 40135145)

Linear Optical DRO Glass Readout Scale DC10 800 mm

Click Here for the Installation manual

1 X 800 MM OPTICAL DRO READOUT SCALE



In General

800 mm MEASURING LENGTH

These new Digital readout systems are a great addition to your lathe or milling machine . They are very accurate and can be used in conjunction with our new 2 & 3 Axis readout displays

Complete with all mounting accessories for you to adapt to your particular machine and a comprhensive installation manual .


They scales are completely swarf and water proof

Specification

Linear glass optical.
Completely swarf and coolant proof.
Compact 18mm scale section, ideal for smaller lathes and mills.
Compact design so as to be unobtrusive when fitted
Working temperature: 10°C - 60°C.
Professional quality and includes all mouting accessories and cables
Easy to use and very accurate
Various sizes available
Compatible with a wide range of different lathes and milling machines.

Voltage - DC5V (DC10-K DC5V-36V
Output Signal TTL EIA-422-A
Biggest Working Speed - 20m/min (1UM) 60m/min(5UM)
Working Temperature 10°C - 60°C
Storage Temperature 30°C - 70°C

Grating System - The transmissive and infrared optical measuring system.the infrared Wave length is 800nm.
9.Reading head sliding system Vertical or 45‹five precision bearing system
10.Measuring LengthF50mm-3000mm

BELOW - WITH OPTIONAL READOUT BOX

DIFFERENT LENGTHS AVAILABLE

INSTALLATION HARDWARE


THIS LISTING IS FOR 1 X SINGLE SCALE UNIT 800 MM



105.00 126.00


Quantity: 

People who bought Linear Optical DRO Glass Readout Scale DC10 800 mm also bought::

1. Linear Optical DRO Glass Readout Scale DC10 300 mm


Related products:
1. Multi Function Digital Readout Box 3 Axis (Ref: 40135910)
2. Multi Function Digital Readout Box 2 Axis (Ref: 40135905)





Multi Function Digital Readout Box 2 Axis  (Ref: 40135905)

Multi Function Digital Readout Box 2 Axis

NEW ! DESIGNED FOR USE WITH OUR NEW RANGE OF GLASS OPTICAL SCALES

CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE

Two Axis Model - (milling/boring/lathe/grinding machine) X & Y Axis

Completely sealed from dust , coolant & swarf
Includes 107 page manual , Pivoting Mounting Bracket and Standard Three Pin UK Plug


Basic functions:
1) Zeroing Data Recovery
2) Power-down memory
3) linear compensation;
4) Input Coordinate
5) display Inch / metric.
6) Encoder selection
7) Resolution setting
8) Counting Direction Selection
9) ABS/INC Coordinate
10) 200 sets SDM Coordinate
11) Ref Ruler Storage Function
12) Calculator
13) non-linear compensation
14) Sleeping Function
15) 1/2 Function

• Power dissipation: 15W
• Working temperature - 10 - 60 C
• Storage temperature -30 - 70 C
• Coordinate Display 1 AXIS , 2 AXIS
• Display: 8 bit display with signed
• Input frequency: <5MHZ • Minimum resolution of angles:0.0001/pulse
• Operating keyboard: light touch buttons
• CE CERTIFICATE, ROHS REPORT, IP REPORT
• Linear scale grating space:0.04mm,0.02mm,0.01mm,power supply is +5V. The diifference between two and four TTL putput signal is 90°






108.34 130.01


Quantity: 

People who bought Multi Function Digital Readout Box 2 Axis also bought::

1. Linear Optical DRO Glass Readout Scale DC10F 200 mm
2. Linear Optical DRO Glass Readout Scale DC10 400 mm
3. Set of 6 Telescopic Bore Gauges TG1


Related products:
1. Linear Optical DRO Glass Readout Scale DC10 800 mm (Ref: 40135145)
2. Linear Optical DRO Glass Readout Scale DC10F 200 mm (Ref: 40135220)
3. Linear Optical DRO Glass Readout Scale DC10 700 mm (Ref: 40135140)
4. Linear Optical DRO Glass Readout Scale DC10 400 mm (Ref: 40135125)
5. Linear Optical DRO Glass Readout Scale DC10 300 mm (Ref: 40135120)





Multi Function Digital Readout Box 3 Axis  (Ref: 40135910)

Multi Function Digital Readout Box 3 Axis

NEW ! DESIGNED FOR USE WITH OUR NEW RANGE OF GLASS OPTICAL SCALES

CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE

Three Axis Model - (milling/boring/lathe/grinding/electronic spark machine) X & Y Axis

Completely sealed from dust , coolant & swarf
Includes 107 page manual , Pivoting Mounting Bracket and Standard Three Pin UK Plug


Basic functions:
1) Zeroing Data Recovery
2) Power-down memory
3) linear compensation;
4) Input Coordinate
5) display Inch / metric.
6) Encoder selection
7) Resolution setting
8) Counting Direction Selection
9) ABS/INC Coordinate
10) 200 sets SDM Coordinate
11) Ref Ruler Storage Function
12) Calculator
13) non-linear compensation
14) Sleeping Function
15) 1/2 Function

• Power dissipation: 15W
• Working temperature - 10 - 60 C
• Storage temperature -30 - 70 C
• Coordinate Display 1 AXIS , 2 AXIS, 3 AXIS
• Display: 8 bit display with signed
• Input frequency: <5MHZ • Minimum resolution of angles:0.0001/pulse
• Operating keyboard: light touch buttons
• CE CERTIFICATE, ROHS REPORT, IP REPORT
• Linear scale grating space:0.04mm,0.02mm,0.01mm,power supply is +5V. The diifference between two and four TTL putput signal is 90°






124.99 149.99


Quantity: 

People who bought Multi Function Digital Readout Box 3 Axis also bought::

1. Linear Optical DRO Glass Readout Scale DC10F 200 mm
2. Linear Optical DRO Glass Readout Scale DC10 400 mm
3. Linear Optical DRO Glass Readout Scale DC10 300 mm


Related products:
1. Linear Optical DRO Glass Readout Scale DC10 800 mm (Ref: 40135145)
2. Linear Optical DRO Glass Readout Scale DC10F 200 mm (Ref: 40135220)
3. Linear Optical DRO Glass Readout Scale DC10 700 mm (Ref: 40135140)
4. Linear Optical DRO Glass Readout Scale DC10 400 mm (Ref: 40135125)
5. Linear Optical DRO Glass Readout Scale DC10 300 mm (Ref: 40135120)





SCT 6 pc Internal Threading & Boring Set 4 MM (Ref: 26631020)

SCT 6 pc Internal Threading & Boring Set 4 MM

Each set comes packed in a metal storage case and contains:
3x Boring Tools- 2 , 2.4 & 2.6 mm width cutting heads - 4mm Diameter & 60 mm Long
1x 55° Internal Thread Cutting Tool - 4mm Diameter & 60 mm Long
1x 60° Internal Thread Cutting Tool - 4mm Diameter & 60 mm Long
1x Tool Holder- 7 mm Square

CLICK THE IAMGE FOR A LARGER PICTURE


29.95 35.94


Quantity: 

People who bought SCT 6 pc Internal Threading & Boring Set 4 MM also bought::

1. SCT 6 pc Internal Threading & Boring Set 6 MM





SCT 6 pc Internal Threading & Boring Set 6 MM (Ref: 26631021)

SCT 6 pc Internal Threading & Boring Set 6 MM

Each set comes packed in a metal storage case and contains:
3x Boring Tools- 2.8 , 3.8 & 4.4mm width cutting heads - 6mm Diameter & 130 mm Long
1x 55° Internal Thread Cutting Tool - 6mm Diameter & 130 mm Long
1x 60° Internal Thread Cutting Tool - 6mm Diameter & 130 mm Long
1x Tool Holder- 9 mm Square

CLICK THE IAMGE FOR A LARGER PICTURE


31.00 37.20


Quantity: 

People who bought SCT 6 pc Internal Threading & Boring Set 6 MM also bought::

1. SCT 6 pc Internal Threading & Boring Set 4 MM





SCT 6 pc Internal Threading & Boring Set 8 MM (Ref: 26631022)

SCT 6 pc Internal Threading & Boring Set 8 MM

Each set comes packed in a metal storage case and contains:
3x Boring Tools- 2.9 , 3.9 & 5 mm width cutting heads - 8 mm Diameter & 140 mm Long
1x 55° Internal Thread Cutting Tool - 8 mm Diameter & 140 mm Long
1x 60° Internal Thread Cutting Tool - 8 mm Diameter & 140 mm Long
1x Tool Holder- 11 mm Square

CLICK THE IAMGE FOR A LARGER PICTURE


31.00 37.20


Quantity: 

People who bought SCT 6 pc Internal Threading & Boring Set 8 MM also bought::

1. MINI LATHE METAL HANDWHEEL AND KNOB ACCESSORY SET UPGRADE
2. 12 MM Shank Clamp Type Knurling Tool for Variable Speed Mini Lathe etc
3. LATHE DVD - 101 VOL 2 - BEYOND THE THREE JAW CHUCK





SCT 6 pc Internal Threading & Boring Set 10 MM *** SPECIAL OFFER*** (Ref: 26631023)

SCT 6 pc Internal Threading & Boring Set 10 MM *** SPECIAL OFFER***

Each set comes packed in a metal storage case and contains:
3x Boring Tools- 5.0 , 6.0 & 7.0 mm width cutting heads - 10 mm Diameter & 140 mm Long
1x 55° Internal Thread Cutting Tool - 10 mm Diameter & 140 mm Long
1x 60° Internal Thread Cutting Tool - 10 mm Diameter & 140 mm Long
1x Tool Holder- 13 mm Square

CLICK THE IAMGE FOR A LARGER PICTURE


30.79 36.95


Quantity: 





SCT 6 pc Internal Threading & Boring Set 12 MM (Ref: 26631024)

SCT 6 pc Internal Threading & Boring Set 12 MM

Each set comes packed in a metal storage case and contains:
3x Boring Tools- 6.0 , 670 & 7.0 mm width cutting heads - 12mm Diameter & 140 mm Long
1x 55° Internal Thread Cutting Tool - 10 mm Diameter & 140 mm Long
1x 60° Internal Thread Cutting Tool - 10 mm Diameter & 140 mm Long
1x Tool Holder- 15 mm Square

CLICK THE IAMGE FOR A LARGER PICTURE


48.00 57.60


Quantity: 





Set of 8 SCT Solid HSS Lathe Turning Tools 8 mm Square  (Ref: SCT2661002)

Set of 8 SCT Solid HSS Lathe Turning Tools 8 mm Square

8 PC SOLID HSS.

TOOL BIT SET 8 MM SHANK,INCLUDING ONE PC OF EACH:

RIGHT HAND TURNING TOOL

LEFT HAND TURNING TOOL

STRAIGHT CUT TURNING TOOL

CORNER RIGHT ANGLE TOOL

BORING BAR

INTERNAL BORING BAR BLIND HOLES

PARTING TOOL

THREAD CUTTING TOOL

PACKED IN WOODEN CASE

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE





21.22 25.46


Quantity: 

People who bought Set of 8 SCT Solid HSS Lathe Turning Tools 8 mm Square also bought::

1. Square Toolsteel - HSS square Tool steel - 1/4 sq x 4 inch long
2. Set of 4 HSS Centre Drills BS1 2 3 & 4
3. Quality Drill Chuck 1 - 13 mm with 2 MT Arbor





Set of 8 SCT Solid HSS Lathe Turning Tools 12 mm Square  (Ref: SCT2661004)

Set of 8 SCT Solid HSS Lathe Turning Tools 12 mm Square

8 PC SOLID HSS.

TOOL BIT SET 12 MM SHANK,INCLUDING ONE PC OF EACH:

RIGHT HAND TURNING TOOL

LEFT HAND TURNING TOOL

STRAIGHT CUT TURNING TOOL

CORNER RIGHT ANGLE TOOL

BORING BAR

INTERNAL BORING BAR BLIND HOLES

PARTING TOOL

THREAD CUTTING TOOL

PACKED IN WOODEN CASE

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE





31.00 37.20


Quantity: 

People who bought Set of 8 SCT Solid HSS Lathe Turning Tools 12 mm Square also bought::

1. Standard Length Beargrip Allen Keys Imperial
2. TYPE 9 HSS INTERNAL THREADING TOOL 10MM SQ
3. TYPE 7 HSS EXTERNAL THREADING TOOL 12 MM SQ





Set of 8 SCT Solid HSS Lathe Turning Tools 16 mm Square (Ref: SCT2661006)

Set of 8 SCT Solid HSS Lathe Turning Tools 16 mm Square

8 PC SOLID HSS.

TOOL BIT SET 16 MM SHANK,INCLUDING ONE PC OF EACH:

RIGHT HAND TURNING TOOL

LEFT HAND TURNING TOOL

STRAIGHT CUT TURNING TOOL

CORNER RIGHT ANGLE TOOL

BORING BAR

INTERNAL BORING BAR BLIND HOLES

PARTING TOOL

THREAD CUTTING TOOL

PACKED IN WOODEN CASE

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE





68.35 82.02


Quantity: 

People who bought Set of 8 SCT Solid HSS Lathe Turning Tools 16 mm Square also bought::

1. SCT Set of 3 Indexable Endmills with APKT Insert
2. Spare 2 mm Parting Insert
3. Glanze Clamp Type Indexable Parting Tool 12 mm





Set of 6 Quality HSS Wood Turning Chisels (Ref: SCT20026S01)

Set of 6 Quality HSS Wood Turning Chisels

6pcs high quality Hss turning tool set
Features:
Hardened blades with brass ferrules.Primary color Ash handles. Packed in wooden storage box.
Hardness: 58-62HRC

Including:
•   Bowl Gouge with 12.7mm (1/2")x230 mm blade,handle length 340mm;
•   Roughing Gouge with 25mm(1")x170mm blade,handle length 300mm;
•   Oval Skew with 28mm x170mm blade,handle length 300mm;
•   Parting Tool with 5mm (3/16")x170mm blade,handle length 255mm;
•   Round Nose Scraper with 3/4"x170 mm blade,handle Length: 255mm;
•   Spindle Gouge with 10mm (3/8")x170mm blade,handle Length: 255mm


CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE




60.00 72.00


Quantity: 

People who bought Set of 6 Quality HSS Wood Turning Chisels also bought::

1. Traditional Straight Lathe Toolbit Holder 22.5 mm H Shank
2. 18" Multi Bit Lathe Chisel Set with 4 Carbide Cutters
3. Proxxon Kit for fixing Vices Proxxon Kit for fixing Vices 702071





IP54 Water Resistant Digital Caliper 6"/150mm (Ref: 30024401)

IP54 Water Resistant Digital Caliper 6

Digital Vernier Calliper 6 inch (150 mm) IP54 Splashproof,

Stainless Steel Hardened

Measuring range: 0-6 inch (0-150 mm), Imperial & Metric

Accuracy / Nonius: 0.0005 / 0.001 inch (0.02 / 0.01 mm)

For outside dimensions, inner dimensions, Depth Gauge

Includes storage box

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE



28.00 33.60


Quantity: 

People who bought IP54 Water Resistant Digital Caliper 6"/150mm also bought::

1. Ball Joint Magnetic Base
2. Linear Optical DRO Glass Readout Scale DC10 700 mm
3. Linear Optical DRO Glass Readout Scale DC10F 200 mm





SCT 3"/75 mm Tilting Drill Press Vice  (Ref: SCT40080001)

SCT 3

QK-D series tilting vices can be tilted to any position from 0~90 °
Use in your drilling machine for machining inclinable surfaces
Made by high quality Solid cast-iron
Base facilitates an endless combination of mounting options
Perfect for those difficult drill press applications
CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE

JAW WIDTH JAW DEPTH JAW OPENDING
3"(75mm) 1-3/8"(35mm) 3"(76mm)

BASE- 160 MM X 160 MM
HEIGHT WHEN NOT TILTED - 110 MM
4 MOUNTING SLOTS EITHER SIDE - 135 MM CENTRE TO CENTRE
2 ACROSS THE OTHER SIDE 150 MM CENTRE TO CENTRE
V JAW FOR ROUND MATERIAL
WEIGHT 5.5 KG







26.22 31.46


Quantity: 

People who bought SCT 3"/75 mm Tilting Drill Press Vice also bought::

1. 5C Horizontal / Vertical Rapid Indexer
2. Wire Gauge Drill Number 76
3. Wire Gauge Drill Number 75





SCT 4"/100 mm Tilting Drill Press Vice (Ref: SCT40080002)

SCT 4

QK-D series tilting vices can be tilted to any position from 0~90 °
Use in your drilling machine for machining inclinable surfaces
Made by high quality Solid cast-iron
Base facilitates an endless combination of mounting options
Perfect for those difficult drill press applications
CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE

JAW WIDTH JAW DEPTH JAW OPENDING
4"(100mm) 1-5/8"(46mm) 4"(102 mm)

BASE- 190 MM X 185 MM
HEIGHT WHEN NOT TILTED - 120 MM
4 MOUNTING SLOTS EITHER SIDE - 160 MM CENTRE TO CENTRE
2 ACROsS THE OTHER SIDE 170 MM CENTRE TO CENTRE
V JAW FOR ROUND MATERIAL
WEIGHT 6.9 KG







34.44 41.33


Quantity: 

People who bought SCT 4"/100 mm Tilting Drill Press Vice also bought::

1. Set of Five Soft Blank End Arbor 2MT
2. Set of 10 Precision Angle Blocks
3. Set of 7 Soba Precision Parallels 150mm Long





SCT Set of 3 Indexable Endmills with APKT Insert (Ref: SCT12137S)

SCT Set of 3 Indexable Endmills with APKT Insert

Set of 3 Indexable Endmills with APKT Carbide Inserts

1/2 " Diameter Shanks

3/8" 1/2 " 5/8"

Great Quality Set in an Aluminium Storage Case

CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE



44.72 53.66


Quantity: 

People who bought SCT Set of 3 Indexable Endmills with APKT Insert also bought::

1. Set of 8 SCT Solid HSS Lathe Turning Tools 16 mm Square
2. Edge Finder 4mm *** SPECIAL OFFER***
3. Dasqua Thread Gauge Set (Ring Gauge) M3-M12 GO








NEW ITEMS - Buy online at Chronos (call us or click live chat for help with NEW ITEMS)
Visit our engineering blog