Vertex Dividing Heads



Vertex BSO Dividing Head  (Ref: XC158..)

Vertex BSO Dividing Head

Please see here for more info

The Vertex BSO dividing head comprises of head stock, tail stock, set 3 dividing plates and chuck back plate

Both the phosphor bronze worm and the spindle are hardened and ground.

Ratio between the work and the worm gear is 40:1. A 24 hole plate is also fitted for quick indexing of simple numbers.
The spindle is rigidly held in a taper roller bearing and the swivel head can be locked at any angle from -10-90'. Supplied complete with test certificate Centre height is 100 mm


IMPORTANT - OUR BSO DIVIDING HEADS HAVE A 1 1/8 X 12 TPI SPINDLE THREAD COMPATIBLE WITH MYFORD AS WELL AS A PLAIN CAST BACKPLATE IF YOU WANT TO ADAPT YOUR OWN CHUCK ETC

.
CLICK THE IMAGE FOR A LARGER PICTURE







199.17 239.00


Quantity:  

People who bought this item also bought:
1. Dial Test Indicator Imperial SORRY OUT OF STOCK (Ref: DT2)
2. Pair of Precision V Blocks 1 3/4 x 2 1/2 x 2 3/4 (Ref: CHV03)
3. 3 Jaw Self Centering Chuck Threaded 1 1/8 x 12 TPI to suit Myford ML7 etc (Ref: 145056)





Vertex BSO Dividing Head with Fitted Chuck  (Ref: BSOC)

Vertex BSO Dividing Head with Fitted Chuck

Please see here for more info

The Vertex BSO dividing head comprises of head stock, tail stock, set 3 dividing plates and chuck back plate

Both the phosphor bronze worm and the spindle are hardened and ground.

Ratio between the work and the worm gear is 40:1. A 24 hole plate is also fitted for quick indexing of simple numbers.
The spindle is rigidly held in a taper roller bearing and the swivel head can be locked at any angle from -10-90'. Supplied complete with test certificate Centre height is 100 mm.
CLICK THE IMAGE FOR A LARGER PICTURE

Complete with a fitted Vertex 5" 3 Jaw Chuck






294.24 353.09


Quantity:  

People who bought this item also bought:
1. 9pc TCT Boring Bar Sets with 12 MM Dia Shanks (Ref: XP163)
2. Soba Automatic Boring Head R8 SORRY OUT OF STOCK (Ref: SBHR8)
3. New Soba Knurling and Parting Kit (Ref: KKP1.)





Vertex BS1 Dividing Head with Fitted Chuck  (Ref: BS1C)

Vertex BS1 Dividing Head with Fitted Chuck

VERTEX BS-1 DIVIDING HEAD WITH FITTED CHUCK

The Vertex BS1 dividing head comprises of head stock, tail stock, set 3 dividing plates and chuck back plate.
The spindle noses are threaded for a chuck. Both the phosphor bronze worm and the spindle are hardened and ground. The head can divide in any angle by the direct, indirect or differential methods. Ratio between the work and the worm gear is 40:1. A 24 hole plate is also fitted for quick indexing of simple numbers. The spindle is rigidly held in a taper roller bearing and the swivel head can be locked at any angle from -10-90'.
Supplied complete with test certificate Centre height is 128 mm.

This is a complete set for any small milling machine or column drill with a movable table, specially designed for the metal mechanic hobbyist.



The dividing head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.

Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.

The swivel head can be locked of any angle from 10° below horizontal to 90° vertical-precision fitting to base assures smooth rotation.

Threaded spindle nose and 24 holes dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.

Easy indexing of all numbers from 2 to 50 and many numbers from 52 of 380.

Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation.

Dividing head fitted with standard accessories like tailstock and dividing plates A, B & C.

Diameter of spindle hole, 20 mm.

Taper of the center, MT-3

Thread of the spindle, 1 1/2 - 8 TPI






425.00 510.00


Quantity:  





Vertex BS1 Dividing Head (NO CHUCK)  (Ref: BS1)

Vertex BS1 Dividing Head (NO CHUCK)

VERTEX BS-1 DIVIDING HEAD AS ABOVE BUT WITHOUT CHUCK

The Vertex BS1 dividing head comprises of head stock, tail stock, set 3 dividing plates and chuck back plate.
The spindle noses are threaded for a chuck. Both the phosphor bronze worm and the spindle are hardened and ground. The head can divide in any angle by the direct, indirect or differential methods. Ratio between the work and the worm gear is 40:1. A 24 hole plate is also fitted for quick indexing of simple numbers. The spindle is rigidly held in a taper roller bearing and the swivel head can be locked at any angle from -10-90'.
Supplied complete with test certificate Centre height is 128 mm.

This is a complete set for any small milling machine or column drill with a movable table, specially designed for the metal mechanic hobbyist.



The dividing head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.

Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.

The swivel head can be locked of any angle from 10° below horizontal to 90° vertical-precision fitting to base assures smooth rotation.

Threaded spindle nose and 24 holes dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.

Easy indexing of all numbers from 2 to 50 and many numbers from 52 of 380.

Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation.

Dividing head fitted with standard accessories like tailstock and dividing plates A, B & C.

Diameter of spindle hole, 20 mm.

Taper of the center, MT-3

Thread of the spindle, 1 1/2 - 8 TPI

THIS MODEL DOES NOT INCLUDE THE CHUCK PICTURED - PLEASE SEE ITEM ABOVE






340.00 408.00


Quantity:  

People who bought this item also bought:
1. VA6 Milling Vice (Ref: VA6)





Vertex BS2 Universal Dividing Head with Chuck  (Ref: BS2C)

Vertex BS2 Universal  Dividing Head with Chuck

VERTEX BS-2 DIVIDING HEAD
This is a complete set for any milling machine, specially designed for the metal mechanic enthusiast. This is the real deal for any machine shop.

- Use for easy indexing of divisions from 2 to 50 and most numbers from 52 to 380.
- Spiral machining capability.
- Convenient swivel head locks at any angle from 10 below horizontal to 90 vertical.
- Dividing head allows you to divide in any angle by the direct, indirect or differential method.
- Hardened and ground spindle is rigidly held in a tapered seat by a draw-in nut.
- Div Plates A: 15-16-17-18-19-20, B: 21-2327-29-31-33, C: 37-39-41-43-47-49.

- Hardened and ground worm provides easy adjustment of worm gear and disengages for direct indexing
- Ratio between worm and worm gear is 40:1
- Features threaded spindle nose and 24 holes dividing plate with easy conversion to fast, direct indexing on numbers 2, 3, 4, 6, 8, 12 and 24.
- Swing: 9-13/64", height: 5-15/64", taper center: MT-4.
- Thread spindle: 2-1/4 x 8" TPI.

Included in the set:

- 6”, 3 jaw chuck.
- Center and driving dog.
- 3 dividing plates.
- Head stock.
- Tail stock.
- Full set of 12 gears for spiral cutting.






695.00 834.00


Quantity:  






Engineering Menu > Rotary Tables, Rapid Indexers & Dividing Heads >  Vertex Dividing Heads



Vertex Dividing Heads - Buy online at Chronos (call us or click live chat for help with Vertex Dividing Heads)


Visit our engineering blog