Indexable Endmills & Sets



GLANZE SET OF PARALLEL SHANK END MILL (APKT)- 12mm (Ref: 782010)

GLANZE SET OF PARALLEL SHANK END MILL (APKT)- 12mm

These GLANZE Indexable Endmills offer low levels of noise and vibration. They have a true helicoil cutting edge and a
hardened steel cutter body which can give a true 90 degree corner. They are suitablefor shoulder milling , face milling ,
side milling and slotting. They employ a torx screw and key for safe grip and insert clamping .

The positive,light cutting but secure insert geometries make high metal removal rates possible, even on smaller , low
powered machines .These inserts generate high quality surfaces even at high feed rates .They cut extremley cleanly

Set of Three with a 12 mm shank

10 - 12 & 16 mm head diameter







64.61 77.53


Quantity: 

People who bought GLANZE SET OF PARALLEL SHANK END MILL (APKT)- 12mm also bought::

1. Steel Rules
2. HSS SLOT DRILL 3.0 MM DIAMETER
3. MORSE TAPER 2 COLLET 12 MM





GLANZE SET OF PARALLEL SHANK END MILL (APKT)- 16 mm (Ref: 782020)

GLANZE SET OF PARALLEL SHANK END MILL (APKT)- 16 mm

CLICK HERE FOR THE TECH SHEET

These GLANZE Indexable Endmills offer low levels of noise and vibration. They have a true helicoil cutting edge and a
hardened steel cutter body which can give a true 90 degree corner. They are suitablefor shoulder milling , face milling ,
side milling and slotting. They employ a torx screw and key for safe grip and insert clamping .

The positive,light cutting but secure insert geometries make high metal removal rates possible, even on smaller , low
powered machines .These inserts generate high quality surfaces even at high feed rates .They cut extremley cleanly

Set of Three with a 16 mm shank

10 - 12 & 16 mm head diameter







69.23 83.08


Quantity: 

People who bought GLANZE SET OF PARALLEL SHANK END MILL (APKT)- 16 mm also bought::

1. 1 1/4 " MILD STEEL ROUND
2. Dasqua Telescopic Bore Gauge Set 8 mm - 150 mm Up to 150 mm Depth
3. Glanze MT3 Indexable Endmill with 3 APKT Inserts





Glanze Set of 3 Mini Indexable Endmills  (Ref: 785060)

Glanze Set of 3 Mini Indexable Endmills


16 mm Shank with Flat

Includes
1 x BDTC0816 11 Chamfer Mill
1 x BRRC 2016 06 Copy Mill
1 x BATC 2016 11 Square Mill
SCREWS & KEY

6 Inserts for the above

Head Diameters are 17.5 mm , 18.4 mm and 18.3 mm

Supplied in a plastic storage case

62.46 74.95


Quantity: 

People who bought Glanze Set of 3 Mini Indexable Endmills also bought::

1. GLANZE SET OF PARALLEL SHANK END MILL (APKT)- 16 mm
2. Dasqua 0-100 mm / 0-4" Absolute Digital Caliper
3. Glanze 16 mm Shank Indexable Endmill





Little Hogger Set  (Ref: LHS)

Little Hogger Set


LITTLE HOGGER INDEXABLE ENDMILL SET NEW!!
· 1" diameter x 3/4 " shank- 2 flutes
· Mill at 5 times the speed of HSS tools plus feed at an average rate of 12" per minute
· Standard 3/4" Weldon Shanks
· Uses standard carbide inserts
· Easy insert replacement
· Uses: TNMA 322: 90deg SNMA 322 RNMA 32: 3/16R

31.63 37.96


Quantity: 

People who bought Little Hogger Set also bought::

1. Spare Tips for Little Hogger Set
2. Pack of 10 Split Pins 1/16 x 1
3. Solid Morse Taper Socket 2MT x 1 1/2 " Diameter





Spare Tips for Little Hogger Set (Ref: LH)

Spare Tips for Little Hogger Set




Choose Tip


Quantity: 

People who bought Spare Tips for Little Hogger Set also bought::

1. Little Hogger Set
2. SET OF 10 CCMT CARBIDE INSERTS TiN COATED (GOLD)
3. SET OF 3 INDEXABLE ENDMILLS





Glanze 10 mm Shank Indexable Endmill (Ref: 760010)

Glanze 10 mm Shank Indexable Endmill

10 mm Diameter
10 mm Shank
Complete with Insert and Tox Key

These new GLANZE Indexable Endmills offer low levels of noise and vibration. They have a true helicoil cutting edge and a hardened steel cutter body which can give a true 90 degree corner. They are suitable for shoulder milling , face milling , side milling and slotting. They employ a torx screw and key for safer grip and insert clamping .

The positive , light cutting but secure insert geometries make high metal removal rates possible , even on smaller , low powered machines . These inserts generate high quality surfaces - even at high feed rates . They cut extremley cleanly.

CLICK THE IMAGE FOR A LARGER PICTURE

26.05 31.26


Quantity: 

People who bought Glanze 10 mm Shank Indexable Endmill also bought::

1. 3"/80 Engineers Square
2. Set of 12 Soba Metric HSS Centre Drills
3. Flycutter R8





Glanze 16 mm Shank Indexable Endmill  (Ref: 760016)

Glanze 16 mm Shank Indexable Endmill

16 mm Diameter
16 mm Shank
Complete with 2 Inserts and Tox Key


These new GLANZE Indexable Endmills offer low levels of noise and vibration. They have a true helicoil cutting edge and a hardened steel cutter body which can give a true 90 degree corner. They are suitable for shoulder milling , face milling , side milling and slotting. They employ a torx screw and key for safer grip and insert clamping .

The positive , light cutting but secure insert geometries make high metal removal rates possible , even on smaller , low powered machines . These inserts generate high quality surfaces - even at high feed rates . They cut extremley cleanly.

41.70 50.04


Quantity: 

People who bought Glanze 16 mm Shank Indexable Endmill also bought::

1. Spare Tips for Little Hogger Set
2. Little Hogger Set
3. SET OF 10 CCMT CARBIDE INSERTS TiN COATED (GOLD)





Glanze MT2 25 mm Indexable Endmill with 3 APKT Inserts  (Ref: 760155)

Glanze MT2 25 mm Indexable Endmill with 3 APKT Inserts

New !

25 mm dia cutting head with 3 x APKT1003 Inserts
MT2 Shank with 10 mm Drawbar thread


These new GLANZE Indexable Endmills offer low levels of noise and vibration. They have a true helicoil cutting edge and a hardened steel cutter body which can give a true 90 degree corner. They are suitable for shoulder milling , face milling , side milling and slotting. They employ a torx screw and key for safer grip and insert clamping .

The positive , light cutting but secure insert geometries make high metal removal rates possible , even on smaller , low powered machines . These inserts generate high quality surfaces - even at high feed rates . They cut extremley cleanly.



CLICK THE IMAGE FOR A LARGER PICTURE



57.15 68.58


Quantity: 

People who bought Glanze MT2 25 mm Indexable Endmill with 3 APKT Inserts also bought::

1. Centre Finder for Round Bar
2. Soba M6 Clamping Kit 36 pc
3. Soba TCT ISO 6R Right Hand Bar Turning Tool 3/8 Shank





Glanze MT3 Indexable Endmill with 3 APKT Inserts  (Ref: 760165)

Glanze MT3 Indexable Endmill with 3 APKT Inserts

New !

25 mm dia cutting head with 3 x APKT1003 Inserts
MT3 Shank with 12 mm Drawbar thread


These new GLANZE Indexable Endmills offer low levels of noise and vibration. They have a true helicoil cutting edge and a hardened steel cutter body which can give a true 90 degree corner. They are suitable for shoulder milling , face milling , side milling and slotting. They employ a torx screw and key for safer grip and insert clamping .

The positive , light cutting but secure insert geometries make high metal removal rates possible , even on smaller , low powered machines . These inserts generate high quality surfaces - even at high feed rates . They cut extremley cleanly.

CLICK THE IMAGE FOR A LARGER PICTURE



57.00 68.40


Quantity: 

People who bought Glanze MT3 Indexable Endmill with 3 APKT Inserts also bought::

1. M12 X 1.75 HSS DIE
2. Spare Blade for Clarke CBS7MH Bandsaw
3. 3/8 UNF CARBON DIE





Spare Insert (Ref: APKT1003)

Spare Insert



6.92 8.30


Quantity: 

People who bought Spare Insert also bought::

1. Glanze MT3 Indexable Endmill with 3 APKT Inserts





Glanze MT2 Indexable Endmill 16mm Dia XC282  (Ref: 761416)

Glanze MT2 Indexable Endmill 16mm Dia  XC282



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
2MT Shank - Tapped 10mm for a drawbar
16mm Head Diameter

1 High Quality Carbide Insert included

31.25 37.50


Quantity: 

People who bought Glanze MT2 Indexable Endmill 16mm Dia XC282 also bought::

1. HSS ENDMILL 10.00 MM DIAMETER
2. 4 1/2" Open Angle Plate
3. HSS 60 DEGREE DOVETAIL CUTTER 1/2 DIAMETER





Glanze MT2 Indexable Endmill 20mm Dia XC283 (Ref: 761420)

Glanze MT2 Indexable Endmill 20mm Dia XC283


The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
2MT Shank - Tapped 10mm for a drawbar
20mm Head Diameter

1 High Quality Carbide Insert included

34.35 41.22


Quantity: 

People who bought Glanze MT2 Indexable Endmill 20mm Dia XC283 also bought::

1. Spare Insert for 2MT Indexable Endmiils
2. HSS ENDMILL 1/4" DIAMETER





Glanze MT2 Indexable Endmill 25mm Dia XC284  (Ref: 761425)

Glanze MT2 Indexable Endmill 25mm Dia  XC284



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
2MT Shank - Tapped 10mm for a drawbar
25mm Head Diameter

2 High Quality Carbide Insert included

35.55 42.66


Quantity: 

People who bought Glanze MT2 Indexable Endmill 25mm Dia XC284 also bought::

1. Spare Insert for 2MT Indexable Endmiils
2. Spare 2 mm Parting Insert
3. SET OF 10 CCMT CARBIDE INSERTS TiN COATED (GOLD)





Spare Insert for 2MT Indexable Endmiils  (Ref: TPAN1103)

Spare Insert for 2MT Indexable Endmiils



3.70 4.44


Quantity: 

People who bought Spare Insert for 2MT Indexable Endmiils also bought::

1. Glanze MT2 Indexable Endmill 25mm Dia XC284
2. SPARE DCMT INSERT TiN COATED (GOLD)
3. Glanze MT2 Indexable Endmill 16mm Dia XC282





Glanze MT3 Indexable Endmill 25 mm Dia  (Ref: 761525)

Glanze MT3 Indexable Endmill 25 mm Dia

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12 mm for a drawbar
25 mm Head Diameter

2 High Quality Carbide Insert included

49.50 59.40


Quantity: 

People who bought Glanze MT3 Indexable Endmill 25 mm Dia also bought::

1. 3 Morse Taper Quad Head Tailstock Die Holder
2. M8 X 1.25 HSS DIE
3. M8 X 1.25 HSS PLUG TAP





Glanze 3MT Indexable Endmill 32mm Head XC285 -  (Ref: 761532)

Glanze 3MT Indexable Endmill 32mm Head XC285 -



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
32mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts

46.95 56.34


Quantity: 

People who bought Glanze 3MT Indexable Endmill 32mm Head XC285 - also bought::

1. M8 X 1.25 HSS DIE
2. M8 X 1.25 HSS PLUG TAP
3. M5 X 0.8 HSS PLUG TAP





Glanze MT3 Indexable Endmill 40 mm Dia  (Ref: 761440)

Glanze MT3 Indexable Endmill 40 mm Dia



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
40 mm Head Diameter

3 High Quality Carbide Insert included

39.60 47.52


Quantity: 

People who bought Glanze MT3 Indexable Endmill 40 mm Dia also bought::

1. Soba ER25 Collet Chuck To Suit Myford
2. 7 Pc Combined Wiggler and Edge Finder
3. 3MT 50MM BORING HEAD SET





Glanze 3MT Indexable Endmill 50mm Head  (Ref: 76150)

Glanze 3MT Indexable Endmill 50mm Head



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
50mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts

32.58 39.10


Quantity: 

People who bought Glanze 3MT Indexable Endmill 50mm Head also bought::

1. Spare Parting Blade 1/2
2. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603
3. Soba 2" Boring Head with 3 MT Shank





Glanze R8 Indexable Endmill 32 mm Dia  (Ref: 761632)

Glanze R8 Indexable Endmill 32 mm Dia



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
R8 Shank - Tapped 7/16 UNF for a drawbar
32mm Head Diameter

2 High Quality Carbide Insert included

46.85 56.22


Quantity: 

People who bought Glanze R8 Indexable Endmill 32 mm Dia also bought::

1. R8 Collet 16 MM
2. GLANZE SET OF PARALLEL SHANK END MILL (APKT)- 16 mm
3. R8 Collet 1/2





Glanze R8 Indexable Endmill 40 mm Dia  (Ref: 761640)

Glanze R8 Indexable Endmill 40 mm Dia



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
R8 Shank - Tapped 7/16 UNF for a drawbar
40 mm Head Diameter

3 High Quality Carbide Insert included

57.75 69.30


Quantity: 

People who bought Glanze R8 Indexable Endmill 40 mm Dia also bought::

1. SET OF 7 PLUG GAUGES M3-M12
2. Glanze R8 Indexable Endmill 32 mm Dia
3. GLANZE SET OF PARALLEL SHANK END MILL (APKT)- 16 mm





Glanze R8 Indexable Endmill 50mm Head  (Ref: 762650)

Glanze R8 Indexable Endmill 50mm Head



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
R8 Shank - Tapped 7/16 UNF for a drawbar
50mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts

51.05 61.26


Quantity: 

People who bought Glanze R8 Indexable Endmill 50mm Head also bought::

1. R8 Stub / Slitting Saw Arbors
2. HSS SLITTING SAW 4" DIA X 1/16 WIDE X 36 TEETH
3. HSS SLITTING SAW 4" DIA X 1/32 WIDE X 100 TEETH





Glanze ISO 30 Indexable Endmill 40mm Head  (Ref: ISO30SH)

Glanze ISO 30 Indexable Endmill 40mm Head



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
ISO30 INT 30 Shank - Tapped M12 for a drawbar
40mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts

68.34 82.01


Quantity: 





Glanze Small Straight Shank Indexable Endmill 1/2 (Ref: TCEM0625)

Glanze Small Straight Shank Indexable Endmill 1/2

These small endmills have a 1/2 parallel shank with a flat for a grubscrew and a single carbide insert

15.25 18.30


Quantity: 





Glanze 20mm TPAN Indexable Endmill 20 mm Straight Shank (Ref: 23001101)

Glanze 20mm TPAN Indexable Endmill 20 mm Straight Shank

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
20 mm Parallel Shank
20mm Head Diameter

1 High Quality Carbide Insert included

21.00 25.20


Quantity: 





Glanze 25mm TPAN Indexable Endmill 20 mm Straight Shank  (Ref: 760525)

Glanze 25mm TPAN Indexable Endmill 20 mm Straight Shank

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
20 mm Parallel Shank
25 mm Head Diameter

2 High Quality Carbide Inserts included

22.05 26.46


Quantity: 





Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603 (Ref: 700211)

Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603



4.39 5.27


Quantity: 

People who bought Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603 also bought::

1. Glanze 3MT Indexable Endmill 50mm Head
2. Set of 10 Spare 2mm Parting Inserts
3. SET OF 10 CCMT CARBIDE INSERTS TiN COATED (GOLD)





Spare insert for 2Mt indexable Endmills (Ref: IMH52)

Spare insert for 2Mt indexable Endmills



2.98 3.58


Quantity: 





SET OF 3 INDEXABLE ENDMILLS (Ref: SCT137S)

SET OF 3 INDEXABLE ENDMILLS

SET OF 3 WITH A 1/2" SHANK - SHANK - 1" LONG - OVERALL LENGTH 3"
INCLUDES THE FOLLOWING HEAD DIAMETES
1/2 - 9/16 & 5/8

27.27 32.72


Quantity: 

People who bought SET OF 3 INDEXABLE ENDMILLS also bought::

1. Spare Tips for Little Hogger Set
2. Spare insert
3. 7/16 BSF CARBON PLUG TAP





Spare insert (Ref: SCT137SS)

Spare insert



4.26 5.11


Quantity: 

People who bought Spare insert also bought::

1. SET OF 3 INDEXABLE ENDMILLS








Indexable Endmills & Sets - Buy online at Chronos (call us or click live chat for help with Indexable Endmills & Sets)
Visit our engineering blog