Multiple uses; cuts, sands, polishes and grinds, etc. 0.3-3.2mm keyless chuck Variable speed Two inset rubber body grips Permanent magnet motor Maximum motor power 100W Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories This 100W multi tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories. Specification for Proxxon FBS 240/E Precision Drill/Grinder Multi -Tool: Chuck: Cap/Type 0.3 to 3.2mm keyless Model: FBS 240/E Nett Weight: 450g Power: 100W Speed: 5,000-20,000rpm

£50.84 £61.01

Quantity:

People who bought this item also bought:

1. 1 Pack of 40 12 BA Standard Steel Nuts (Ref: SN12)

2. 1 Pack of 40 10 BA Standard Steel Nuts (Ref: SN10)

3. Laser Centre & Edge Finder with 1/2 " Dia Shank & Polarisor - SORRY OUT OF STOCK (Ref: LCEHP)

Customer Reviews

Great tool so far Haven't used the tool a lot yet but so far the results ar very good no vibration and very powerful for its size. George Keeble - Norfolk

Proxxon Precision drill/grinder FBS 240/E (Ref: 28472offer)

SPECIAL OFFER Multiple uses; cuts, sands, polishes and grinds, etc. 0.3-3.2mm keyless chuck Variable speed Two inset rubber body grips Permanent magnet motor Maximum motor power 100W Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories Dura-Grit are powerful, long lasting cutting and shaping tools that finish as they cut! This starter set gives you everything you need for carving and shaping! They are unique, strong, carbide coated steel shapes, mounted on 3.2mm(1/8") heavy duty mandrels. Made with tungsten-carbide grit, braze welded to steel, Dura-Grit tools are extremely strong and aggressive. This 100W multi tool has a keyless chuck (0.3-3.2mm) to accept a wide range of accessories, well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range of 5,000 to 20,000rpm. At the opposite end to the drill chuck is a hanging loop, used when the tool is coupled up to a flexible shaft. This tool has a quality specification, a flexible drive shaft with precision handpiece and 1.0mm, 2.4mm and 3.0mm collets is also available as an optional extra. Supplied in a plastic storage case with 43 cutting, grinding, drilling and sanding accessories. Specification for Proxxon FBS 240/E Precision Drill/Grinder Multi -Tool: Chuck: Cap/Type 0.3 to 3.2mm keyless Model: FBS 240/E Nett Weight: 450g Power: 100W Speed: 5,000-20,000rpm

£90.00 £108.00

Quantity:

Proxxon IB/E Professional Mini Drill/Grinder - 240V (Ref: 28481)

Very precise and accurate Aluminium motor casing Variable speed (5,000-20,000rpm) Supplied in carrying case with 30 accessories Six collets from 0.8mm to 3.2mm A very precise and accurate mini-tool drill with an aluminium motor casing and variable speed (5,000-20,000rpm) suited to professional use in the workshop. The aluminium casing dramatically reduces any potential bearing problems resulting in an exceptionally smooth and vibration free tool to use. Supplied in a carrying case with 30 accessories and full set of six collets from 0.8mm to 3.2mm Please note that this unit will not accept a keyless chuck.

£73.34 £88.01

Quantity:

People who bought this item also bought:

1. Proxxon MICROMOT Keyless Chuck (Ref: 28941)

2. Proxxon 9 Piece Electronic Technician Set (Ref: 28930)

3. Proxxon MICROMOT MB 140/S Drill Stand (Ref: 28606)

Customer Reviews

A great drill Although this is more expensive than the dremel and dremel clones the quality is a LOT higher than any similar drill. Very well made, almost unmesurable runout on the spindle and runs cool and relatively quiet compared to most others. Chris -

Proxxon LB/E Long Neck Straight Drill/Grinder (Ref: 28485)

Ideal for use in inaccessible areas. Die-cast aluminium head 100mm neck and 20mm MICROMOT collar Mill, drill, grind, polish Allows use in slots and channels High-revving, special motor, full-wave electronic speed control Ground steel spindle runs in a ball bearing, minimising play Six triple slit, hardened steel collets 1.0 to 3.2mm and closure nut included Ideal for use in inaccessible areas, for milling, drilling, grinding and polishing operations. The head is die-cast aluminium with a 100mm neck and 20mm MICROMOT collar. The design allows the LB/E to be used in slots and channels and makes it ideal for internal cuts. The high-revving, special motor has full-wave electronic speed control and is usable for extended periods. The ground steel spindle runs in a ball bearing, minimising play. Six triple slit, hardened steel collets 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm and closure nut are included. With lock button for rapid cutter changing.Technical Data: 220 - 240V. 50/60Hz. 5,000 to 20,000rpm. Stable head of die-cast alu and fibreglass reinforced POLYAMIDE main housing. Length 300mm. Weight 630 g. Insulated to class 2. The 20mm collar allows fitting of optional drill stands, horizontal stands, etc.

£79.00 £94.80

Quantity:

People who bought this item also bought:

1. 2MT 50MM BORING HEAD SET (Ref: SMA0622)

2. HSS DRILL BIT 3.9 MM (Ref: MD39)

3. HSS DRILL BIT 3.2 MM (Ref: MD32)

Proxxon COLT 2 Pocket Drilling Machine (Ref: 28490)

Small, handy and powerful Powerful and durable permanent magnet motor for high loads Smooth running planetary gear in die-cast aluminium housing Handy switch with integral speed control & lock. Varible speed 0 - 3,000rpm ROHM chuck capcaity: 0.5 - 6.0mm Packed in a sturdy plastic carrying case Drilling capacity in steel 5.0mm Powerful and durable permanent magnet motor for high loads. Smooth running planetary gear in die-cast aluminium housing. Handy switch with integral speed control and lock. With ROHM chuck. Packed in a sturdy plastic carrying case.

£79.00 £94.80

Quantity:

People who bought this item also bought:

1. Proxxon Polishing Set for SP/E (Ref: polishset)

2. Set of 3 HSS Step Drills (Ref: MX168.)

3. 1/8 Letter Punch Set (Ref: MLS212..)

Proxxon MICROMOT Steel Collet Set (Ref: 28940)

MICROMOT steel collets fit all handheld MICROMOT machines, excluding the engraver GG 12. One each 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm, clamping nut and holder for storage are included. MICROMOT steel collets are hardened and thus have a high, consistent flexibility. They also maintain prolonged accuracy, even after regular use (these collets should not be compared with unhardened, four-slit collets of brass and aluminium). The triple slit collet is substantially more difficult to manufacture than the four-slit type, but offers a better load-bearing surface. This is especially important for cutters with small shaft diameters.

£7.09 £8.51

Quantity:

People who bought this item also bought:

1. Proxxon MICROMOT Keyless Chuck (Ref: 28941)

2. Proxxon Holders for Bit & Cutter Storage (Ref: 28359)

3. Johnson Matthey Tenacity No5 Flux POWDER 500g- FOR USE WITH CADMIUM FREE SOLDER (Ref: TN2)

Proxxon LWS Long Neck Angle Grinder 240V (Ref: 28547)

For steel, non-ferrous metals, glass, ceramics, wood and plastic Supplied with grinding disc, fan sander and cutting disc in neat plastic case Quiet and long lasting DC motor For working with steel, non-ferrous metals, glass, ceramics, wood and plastic. For cutting, rough-machining, grinding, precision polishing, fine polishing and carving wood. It features a specially balanced, 100W powerful, quiet and long lasting DC motor. Supplied with a grinding disc (60 grit), fan sander (100 grit) and cutting disc in neat plastic case. This grinder will accept the blades for the arbortech mini carver which further increases its potential for texturing and carving. Disc Diameter: 50mm Length:: 250mm Model LWS Nett Weight 550g Power: 100W Speed: 13,000rpm

£88.00 £105.60

Quantity:

Customer Reviews

Proxxon Angle Grinder Nice to use for my Wood Carving, and the free carver blades are brilliant, I also bought the Carver and that too is great espicially with my aged arthritic hands. On the debit side I had difficulty in finding prices for accessories, buit this seems to have been solved now.Regards,Norman Norman Wilby - Devon

Proxxon BSL 220/E Belt Sander (Ref: 28536)

This is a high quality industrial power tool albeit much reduced in size from the norm, therefore perfectly suited to smaller more intricate tasks or delicate finishing or refining. It is designed for shape finishing and fine polishing (flat surfaces). Also extremely useful for de-burring metal, paint removal and fine finishing. The powerful 100W motor features full wave electronic speed control. The head is die-cast aluminium with the main housing made of fibreglass reinforced polyamide. The head can be angled at 0°, 45° and 90° to the body at the press of a button. The sanding belt can be changed in a matter of seconds. Packed in durable plastic case, including 4 sanding belts (2 of each 80 and 180 grit). 100W powerful motor Variable speed 300 - 700 m/min Sanding belt only 10mm wide Die-cast aluminium head; fibreglass reinforced POLYAMIDE body Total length only 350mm, weight: 650g Perfect for intricate jobs, delicate finishing or refining The head can be angled at 0°, 45° and 90° to the body Supplied in case, including 4 sanding belts (2 of each 80 and 180 grit)

£96.00 £115.20

Quantity:

Proxxon SS 230/E Super Jig Saw (Ref: 28530)

Precision equipment for cutting. Small & comfortable. Die-cast aluminium head Excellent cutting capacity for smaller work Housing head is die-cast aluminium for longevity Foot is adjustable up to 45° for mitre cuts Stroke speed is variable by a full wave electronic speed control 2,000 - 4,500 per min Ideal for very tight curves in wood, PC cards to 5mm & non-ferrous metals to 3mm Complete with storage case & 4 Super-Cut blades for wood, plastic & metal This is a precision jigsaw for cutting smaller and more intricate work. The main housing is die-cast aluminium for longevity. The base tilts up to 45° for mitre/angled cuts. The stroke speed is variable between 2,000 and 4,500 strokes per minute, with full wave electronic speed control. An ideal tool for cutting very tight curves in wood, PC cards (up to 5mm thick) and non-ferrous metals (up to 3mm thick). It is supplied in tough moulded case with 4 Super-Cut blades for wood, plastic & metal. Maximum power consumption 100W, 220 - 240V. Stable head of die-cast aluminium; main housing made of fibreglass reinforced polyamide. Length 230mm. Weight 700g. Insulated to class 2.

£77.00 £92.40

Quantity:

Proxxon OZI 220/E Multi Tool (Delta sander OZI 220/E) (Ref: 28520)

Oscillating motion ensures lack of vibration & kickback Head of die-cast zinc, ensuring exact & stable housing for the working parts For very tight spots, e.g. corners, sides & inaccessible areas Variable speed facility ensures the correct speed for every material 3,000 - 10,000 orbits per minute Self adhesive sanding pads ensure quick changing & optimum usage Simply remove & rotate through 120° for a fresh corner. Sanding area 65 x 65 x 65mm Supplied with 4 sanding sheets (2 x 80grit, 1 each 150 and 240grit) This multi use tool will sand, cut and rasp with the various accessories available. Using an oscillating motion the triangular head allows sanding in very tight spots, e.g. corners, sides and inaccessible areas, as well as the fitting of sawblades, scraper heads and files. The variable speed facility ensures the correct speed for every material, between 3,000 and 10,000 per minute. The head is die-cast zinc, ensuring exact and stable housing for the working parts, the main housing made of fibreglass reinforced POLYAMIDE. The oscillating motion ensures lack of vibration and kickback. Length 230mm, weight 630g, insulated to class II. The OZI is supplied with 4 sanding pads of different grits.(2 x 80grit, 1 each 150 and 240grit). Option: Additional sanders/blades: Flexible Scraper Blade - 50 x 70mm , HSS Cutting Blade - 65mm, Delta Sanding Sheets 80grit (Pkt 5), Delta Sanding Sheets 150grit (Pkt 5), Delta Sanding Sheets 240grit (Pkt 5), Delta Sanding Sheets 80grit (Pkt 25), Delta Sanding Sheets 150grit (Pkt 25), Delta Sanding Sheets 240grit (Pkt 25), Diamond File for OZI - 120 grit, Diamond File for OZI - 150 grit, HSS Plunge Saw Blade - 8mm wide, HSS Plunge Saw Blade - 14mm wide, Diamond Cutting Blade - 65mm

£85.00 £102.00

Quantity:

People who bought this item also bought:

1. Proxxon Corundum Disc for KGS80 (Ref: Corundum)

2. 16mm Proxxon HSS Plunge Saw Blades for OZI Delta Sander (Ref: 28898)

3. 8mm Proxxon HSS Plunge Saw Blades for OZI Delta Sander (Ref: 28897)

Proxxon BBS/S Compact Belt Sander (Ref: 28526)

Small compact sander for modelling Fine adjustment for the rollers prevents belt run off 40mm wide Spring clamping system for easy tool-less replacement of belts Supplied in a sturdy plastic carrying case with 5 each 120g and 240g sanding belts and screw clamp Compact, light and well balanced, (only 175mm long) with super driving power for maximum sanding performance! The 40mm wide sanding belt is located flush on the left side to allow surfaces to be sanded "right down to the corner". A fine adjustment for the rollers prevents run off on the side. Spring clamping system for easy replacement of belts without tool. Supplied with a sturdy plastic carrying case together with 5 each 120 grit and 240 grit sanding belts and a clamp for stationary, inverted use.

£104.17 £125.00

Quantity:

Proxxon MOS Carver, Flexcut Slipstrop and Flexcut Gouges Package (Ref: 28644)

SPECIAL OFFER For joiners, model makers and woodcarvers Special balanced, low noise DC motor Includes 3 Japanese bi-metal blades Supplied in storage case The Proxxon MOS carver features a low noise 50W DC motor with extremely high life expectancy, the gear head is made of die-cast aluminium and the main housing, glass-fibre reinforced polyamide. It is excellent for the carving of all types of wood and plaster. Very popular for woodcarving, antique restoration and lino cuts, the MOS is supplied in a carry case along with three high-grade Bi-metal Japanese blades (Gouge, vee tool and Chisel). This great value package includes the Proxxon MOS carver, the Flexcut Slipstrop c/w compound and a set of four Flexcut RG detail gouges. Length: 230mm Model: MOS Nett Weight: 680g Power: 50W

£123.96 £148.75

Quantity:

Customer Reviews

A most excellent package deal I am not a 'woodcarver' as such.. rather a Bonsai owner and grower. I find the equipment an excellent tool for the fine integrate work that is required on trees. It is lightweight, flexible and easily used, its quite operation fits well with the solemnity of the art. Ziggy - Canberra, AUstralia

Proxxon MOF Miniature Router - 240V (Ref: 28568)

Designed for small work and modelling projects Equipped with an adjustable side fence and dust extraction hose Supplied c/w a collet set in sizes 1, 1.5, 2, 2.4, 3, and 3.2mm Compact but fully equipped miniature plunge router for small work and modelling projects. The 130 watt single speed motor runs at 27,500 rpm for a smooth finished cut on a variety of materials. Small but sturdily built with a base plate measuring 70 x 100mm, equipped with an adjustable side fence and dust extraction hose. Supplied complete with a collet set in sizes 1, 1.5, 2, 2.4, 3, and 3.2mm covering most likely cutter and accessory sizes.

£68.34 £82.01

Quantity:

People who bought this item also bought:

1. Protractor (Ref: MP965w)

2. BLACK Brimarc Braces (Ref: 415)

3. Proxxon Straight Router Bit 3.2mm dia (Ref: 29024)

Proxxon HKP 220 Hot Melt Glue Gun (Ref: 28192)

Glues quickly & efficiently Metal, wood, plastic, Ceramics, glass, Cardboard & leather Depending on the material and on the adhesive quantity applied, the adhesive sets after about 30 seconds, allowing positional corrections within this period of time (impossible with instant glues). The 7mm glue sticks are perfect for delicate work such as model build-ing, toy and jewellery making, dried flower arrangements, etc. Sensitive mechanical feed ensures correct glue quantity delivery. Integral stand positions gun on worktop when not in use. Short heating time. Technical data: 220 - 240V. PTC controlled element for exact temperature of 200ºC. Four glue sticks 7 x 100mm and 3 interchangeable metal nozzles are included in the set.
The three Nozzles are
Round - 1.84 mm ID
Round - 1.93 mm ID
Flat - 5.61mm wide x 1.05 Opening

£10.80 £12.96

Quantity:

People who bought this item also bought:

1. Proxxon HSS Cutter - 6mm Dia (Pkt 2) (Ref: 28725)

2. Proxxon HSS Cutter - 3mm Dia (Pkt 2) (Ref: 28722)

3. Proxxon High Speed Steel Cutters - Set of 3 (Ref: 28720)

Proxxon MH 550 Micro Heat Gun (Ref: 27130)

Compact heat gun for smaller jobs Two heat settings, 350° and 550° Strong case with soft grip and feet for stationary use Stainless steel nozzle and three additional push fit nozzles Perfect for small modelling or electronic tasks A nice compact heat gun for small jobs where a normal unit would be far too big or aggresive. The housing is made from glass fibre reinforced polyamide with soft grip and feet for stationary use. A powerful 500W element produces an even temperature in two stages, 350° and 550°, with a protection thermostat to prevent overheating. The nozzle is made from stainless steel, three push fit extra nozzles are provided, spot, fan and reflector. Perfect for shaping plastics, soldering and de-soldering electrical components or removing paint and varnish from small items. Specification for Proxxon MH 550 Micro Heat Gun: Air Flow: 180l/min Model: MH 550 Nett Weight:: 500g Power 500W Temperature: 350 & 550°

£29.95 £35.94

Quantity:

People who bought this item also bought:

1. Carrs Green Label Flux (Ref: GR1)

2. Proxxon HKP 220 Hot Melt Glue Gun (Ref: 28192)

Proxxon PRIMUS Vice - 75mm (or larger 100mm) (Ref: 20392)

* Multipurpose Vices feature exact feed * For industry and demanding hobbists * Interchangeable hardened jaws, slotted vertically and horizontally * Both jaws are slotted at the top for gripping flat work pieces * Solid, cast iron base with CNC machined ways * Feed screw features a rolled thread for ease of movement * PRIMUS 100: 100mm jaw width, 75mm opening * PRIMUS 75: 75mm jaw width, 65mm opening Multipurpose Vices "PRIMUS" feature exact feed, ease of operation and accuracy. These vices are suitable for industry or the demanding home users. Fitted with interchangeable hardened jaws, slotted both vertically and horizontally, so either round or odd shaped objects may be clamped. Both jaws are slotted at the top, facilitating gripping of flat work pieces. The solid, cast iron base has CNC machined ways. The relatively high weight may allow use of the vice without fastening it down. The feed screw features a rolled thread which ensures ease of movement even with high axial loads. Option: Size option: 75mm (20392), 100mm (20402)

£38.47 £46.16

Quantity:

People who bought this item also bought:

1. Proxxon Mill/Drill - COMPLETE SYSTEM (Ref: BFW40)

Engineering Menu > Proxxon 12v & 240v Precision Workshop Tools > 240v Hand Held Proxxon Tools