Dustproof Halogen Gooseneck Lamp  (Ref: JH20FTSP)

  Equipped with built in transformer for high speed transmission.
  Has a Gooseneck arm for smooth adjustment and maximum efficiency when positioning.
  The arm length is 520mm long
  The plastic head and base ensure complete insulation for maximum safety
  Incorporates 20 W Halogen Bulb
  The dual shade design allows for fast heat dissapation
  Power lead is 1.2 metres long

 £27.95 inc vat & carriage UK Mainland !

NEW ! – THE VERY LATEST IN WORKSHOP LIGHTING ! – Dustproof LED Gooseneck Lamp  (Ref: JHL20FTSP)                                                         

  Equipped with built in transformer for high speed transmission.
  Has a Gooseneck arm for smooth adjustment and maximun efficiency when positioning.
  The arm length is 520mm long
  The plastic head and base ensure complete insulation for maximum safety

  Incorporates 3 X LED BULBS FOR GREATER AND BRIGHTER LIGHTING EFFICIENCY
  The dual shade design allows for fast heat dissapation – Power lead is 1.2 metres longLow Voltage 24v AC/DC operation

   £45.00 inc vat & carriage UK Mainland !

 Dustproof Halogen Lamp 55w  (Ref: JW55SP)

  The totally enclosed lighting head provides protection against dust,coolant,swarf etc etc. Includes the transformer plus an efficient quartz  halogen bulb which provides great light output. Superb for use with all machine tools.
  Bolt Down base (magnetic optional base available – see below)
 Equipped with built in transformer for high speed transmission..
 The arms length is 490mm long total

Incorporates 55 W Halogen Bulb

The reflection lens built on the luminaire head ensures high lighting effiency and concentrates the light on the targeted object

£56.00 inc vat & carriage UK Mainland !

CLICK HERE TO ORDER

Spring Offers on Boxes of Inserts !

We can currently offer the following great deals on boxed sets of Carbide Inserts !

Set of 10 Spare 6mm Profiling Inserts for Glanze Indexable Lathe Tools etc  (Ref: RCMT0602S)
	SPECIAL OFFER ! £23.95 inc vat & carriage UK mainland

SET OF 10 DCMT CARBIDE INSERTS FOR GLANZE LATHE TOOLS FOR A SUPERIOR FINISH ON ALUMINIUM !  (Ref: DCGT020202S)
	SPECIAL OFFER !! A set of 10 Spare DCMT Inserts for All glanze DCMT type turning and boring tools THESE GIVE A FANTASTIC FINISH ON ALUMINIUM – Suits 6 , 8 , 10 ,m 12 & 16mm shank tools   £39.50 inc vat & carriage UK mainland.

SET OF 10 DCMT CARBIDE INSERTS FOR GLANZE LATHE TOOLS  (Ref: DCMT070204)
	SPECIAL OFFER !! A set of 10 Spare DCMT Inserts for All glanze DCMT type turning and boring tools – Suits 6 , 8 , 10 ,m 12 & 16mm shank tools £29.50 inc vat & carriage UK mainland

SET OF 10 CCGT CARBIDE INSERTS FOR GLANZE LATHE TOOLS- A SUPERIOR FINISH ON ALUMINIUM ETC !  (Ref: CCGT060202 AL)
	SPECIAL OFFER !! A set of 10 Spare Inserts for All glanze SCLCR type turning and boring tools – Suits 6 , 8 , 10 ,m 12 & 16mm shank tools SPECIALLY MANUFACTURED FOR A SUPERIOR FINISH ON ALUMINIUM ETC   £35.95 inc vat & carriage UK mainland

SET OF 10 CCMT CARBIDE INSERTS FOR GLANZE LATHE TOOLS  (Ref: CCMT060204S)
	SPECIAL OFFER !! A set of 10 Spare Inserts for All glanze SCLCR type turning and boring tools – Suits 6 , 8 , 10 ,m 12 & 16mm shank tools £23.95 inc vat & carriage UK mainland   CLICK HERE TO ORDER !

Our high quality ultrasonic cleaning tanks incorporate everything that is required of such an essential product. Two Models available

The ultrasonic cleaning and preparing of components for all industries can save thousands of pounds per year not only in service costs, but the continual debris free cutting allowing higher performance at all times with dramatically reduced down times. Safe, friendly and possibly the most essential accessory for growing workshops demanding the highest of quality, reliability and cost efficiency.

Model JP100

£1796.40 inc vat and del UK mainland

Model JP20 

£476.40 inc vat and carriage – UK mainland

CLICK HERE TO PLACE AN ORDER

Tormek Sharpening and Tormek Grinding systems. Tormek sharpening is all about repeatability. The tools are guided in jigs and you remove only a minute fraction of steel at each sharpening, which makes it fast. Your tools will last longer. Tormek sharpening systems shape the tool exactly to your needs. Complicated shapes as fingernail turning gouges, spoon carving gouges and oval skew chisels are easily sharpened. Once the shape is created, you can resharpen the edge in less than a minute. The Tormek water cooled slow speed grindstone imean that the steel the edge does not overheat and lose its hardness.

The Tormek leather wheel is impregnated with honing compound and polishes the edge to a razor sharpness. No grinding dust is produced and the steel particles are deposited into the water trough. Tormek systems are safe. At the low speed, you can fully control the sharpening. No sparks are produced and there is no risk to your eyes and you can safely use the machine in areas of high fire risk. Click here to buy Tormek Sharpening and Tormek Grinding systems.

The most competitive online shop for Arbortech Carving and Woodworking Tools. Many regular Chronos customers have model engineering projects take years to complete; woodcarving using Arbortech power tools could be a rewarding diversion with the power carving tools taking just hours to create beautiful pieces.

You can buy the Arbortech Power Chisel which has a high power 750W electric motor for easy timber removal in the hardest woods. The Arbortech PRO-4 Kit includes the Arbortech blade and Pro-Guard and fits onto most 100mm or 115mm angle grinders and removes large amounts of wood quickly and effectively when carving or sculpting. The Arbortech Mini Carver is smaller version of the famous Arbortech Pro blade is much appreciated by professional carvers. You can also see some carving projects using the Arbortech range.

The Arbortech Woodworking range of products was first developed in 1988 for woodworkers to sculpt and shape wood in any direction. The first product developed called the “Woodcarver” blade, fitted to a small 4″ or 100mm angle grinder caused a major breakthrough for woodworkers by giving an increase in productivity without the limiting restraints of only working with square edges. This creative aspect of working with Arbortech wood shaping tools has allowed a new dimension in woodworking to flourish.

The British Woodcarvers Association has some great information including how to get started with simple carving projects. Chronos will start to feature and list woodcarving clubs and would welcome any suggestions. We would also like to post project plans to share in our forthcoming woodworking and woodcarving forum.

Folding the chair is as simple as lifting the seat back upward out of two pockets and closing the chair flat. Because fully threaded bolts at the pivot points would cause premature wear in the wood, Veritas offer a stainless steel hardware pack consisting of six custom-made bolts with matching locking nuts and flat washers.

The bolts are manufactured with the ideal combination of head style, material and thread length for use with this plan.

JUST £10+VAT:  Buy Veritas Woodworking Project Plans 

Not including molding or combination planes, there are four basic plane blade profiles: straight, round, crowned, and rounded corners. Which to use depends on the type of plane used and the planing task at hand.

Veritas Block Planes

Veritas NX60 Premium Block Plane | Veritas Standard Block Plane | Veritas Apron Plane | Veritas Skew Block Plane | Veritas Low Angle Block Plane

Veritas Bench Planes

Veritas Bevel-Up Smoothing Plane | Veritas Small Bevel-Up Bench Plane | Veritas Bevel-Up Jointer Fence | Veritas No. 4 1/2 Smoothing Plane | Veritas No. 4 Smoothing Plane | Veritas No. 5 1/4 Bench Plane | Veritas No. 6 Fore Plane | Veritas Bevel-Up Jointer Plane | Veritas Low Angle Jack Plane | Veritas Low Angle Smoothing Plane | Veritas Jointer Fence Guide

Veritas Speciality Planes

Veritas Miniature Router Plane | Veritas Detail Palm Planes | Veritas Miniature Edge Plane | Veritas Miniature Shoulder Plane | Veritas Detail Rebate Planes | Veritas Small Shoulder Plane | Veritas Side Rebate Plane | Veritas Iron Edge Trimming Plane | Veritas Small Plough Plane | Veritas Bull Nose Plane | Veritas Large Shoulder Plane | Veritas Medium Shoulder Plane | Veritas Router Plane | Veritas Small Router Plane | Veritas Scrub Plane | Veritas Handle Kit for Router Plane | Veritas Skew Rebate Planes | Veritas Plane Sacks | Veritas Scraping Plane | Veritas Plane Blades | Veritas Plane Blades | Blades for Veritas Skew Block Planes | Blades for Veritas Detail Palm Planes | Blades for Veritas Small Bevel-Up Bench Plane

Straight for jointer, rabbet or shoulder planes. Without a straight cutting edge when using a jointer or shoulder plane, it is almost impossible to get a satisfactory glue line. While some distortion may sometimes be acceptable in a rabbet, the main objective is to achieve two perpendicular surfaces with a sharp intersection. A straight edge is one of the easiest profiles for blade manufacturers to produce, but it’s a challenge for woodworkers to maintain without an investment in dedicated equipment. Nonetheless, a bit of practice, freshly trued stones and a good honing guide will usually produce a satisfactory edge.

Round this blade profile is desired when planing rough-sawn lumber by hand. Scrub planes are made specifically for this job, equipped as they are with a generously rounded blade profile. It is also quite practical to grind the required profile on a jack plane blade. A spare blade will typically cost much less than a dedicated plane.

Crowned mostly for smooth planes, this profile may also be useful in a jack or fore plane when flattening a panel that is wider than the blade. The goal is to conceal overlapping strokes on a wide surface by having the middle portion of the blade project from the sole while the corners are safely out of the way. The resultant surface will have a series of broad, shallow, parallel flutes, but the panel will appear to be flat to all but the most careful observer. The degree of crown will depend on the width of the blade. While a similar depth of the curve will be desired, the same radius is not suitable for both a #4-1/2 heavy smoother (with a 2-3/8 wide blade) and a #3 small smoother (with a 1-3/4 wide blade). Ideally, the height of the crown will be slightly more than the intended shaving thickness (e.g., for fine smoothing this may be as little as 0.0015). This profile is usually the easiest for a woodworker to produce since most stones (especially water stones) that have not been freshly trued will naturally produce a crowned blade. When working on a hard, flat, oil stone, the crown can still be achieved by alternately applying more pressure on the corners.

Rounded Corners According to many authorities on the subject, this is the best all-purpose profile for smoothing and jack planes because it ensures the maximum width of cut, allows overlapping strokes on a wide surface, and can still be used to dress the edge of a board for lamination. It is, however, a bit of a challenge to do well. All the requirements to sharpen a straight edge must be met, plus a smoothly rounded transition needs to be ground and honed on each corner or the edges of the blade will leave lines in the workpiece. There are no jigs sold for this process, so a bit of practice freehand grinding and honing is needed to get the profile just right.

Veritas Tools produce a spectacular range of woodworking tools. Planes from a trusted work-horse through to planes for the most intricate of wooded pieces. See our plane section for Veritas block planes, bench planes, speciality planes + spare blades.

This all-in-one polishing kit is to help remove scratches from various Ferrous and Non Ferrous metal objects and polish hard metals such as steel, iron and stainless steel. Very handy to polish up garden tools, golf clubs and many other applications returning their shine and making them feel like new.
Included in this kit are three separate buffing wheels , each with a different firmness to allow you to get the best result possible, along with the buffing wheels you receive three different types of polishing compound to go specifically with the different buffingpads. You also receive a false nose with a 1/2″ / 12 mm bore for mounting the wheels onto your bench grinder etc . We also include a Buffing Rake – A handy tool for prepping buffing wheels to accept polishing compound. A Steel rake attached to a sturdy hardwood handle – removes dried compound and debris. Easy to use, just move across the wheel face while it’s running. .
Specifications

• 1 x 150mm firm buffing pad 
• 1 x 150mm firm buffing pad used for stainless steel, iron and steel 
• 1 x 150mm medium buffing pad used for stainless steel, iron and steel 
• 3 x pots of polishing compound 
• 1 x Adaptor for Bench Grinder
1 x Buffing Rake

ONLY £18.96 INC VAT AND CARRIAGE UK MAINLAND !

DETAILS AT

 http://tinyurl.com/7yrtvxp