Clearance Items



Axminster FM952 Safety Visor (Ref: 500080)

Axminster FM952 Safety Visor

35% OFF WHILE STOCKS LAST


Fully adjustable with padded head band
Excellent for use in the workshop or on site
Full face protection to EN166 1B
Hinged visor can be flipped up and down as required

LIMITED QUANTITY

CLICK THE IMAGE FOR A LARGER PICTURE

Safety Visor only - Mask in larger picture is not included

7.87 9.44


Quantity: 

People who bought Axminster FM952 Safety Visor also bought::

1. Morse Taper Sleeves- MT2-MT3 Open Ended
2. Edge Finder 4mm *** SPECIAL OFFER***
3. Pair of 125mm Magnetic Aluminium Vice Jaws





LATHE DVD - 101 VOL 2 - BEYOND THE THREE JAW CHUCK (Ref: LD2)

LATHE DVD - 101 VOL 2 - BEYOND THE THREE JAW CHUCK

SPECIAL OFFER £9.95 INC VAT !! - ONLY WHILE STOCKS LAST

This volume is designed to familiarize you with alternate methods of workholding that will allow you to use your lathe to its full potential!!

Some of the topics covered are:

Intro & Shop Safety

Setting up and using your 4-Jaw chuck

- Centering Round Stock
- Centering Non-round Stock

Tailstock & Laser Methods
The Lathe Wiggler

Faceplate Operations

- Turning Between Centers
- Using Fixtures for large workpieces

And with the purchase of this Volume, you've also purchased a Single-User License to use the "ShopBuddy" shop calculator software included on the DVD!

We cover installing and using it in the conclusion of the presentation.
Running time: 55 mins. prox.

8.29 9.95


Quantity: 

People who bought LATHE DVD - 101 VOL 2 - BEYOND THE THREE JAW CHUCK also bought::

1. Morse Taper Sleeves- MT1-MT3 Tang End
2. Mini Machines 101 General Machinist Series Toolmaking & Restoration DVD
3. Draper 100mm Hardwood File Handle





LATHE & MILL DVD 101 - MILL & LATHE SPINDLE & GEARBOX REPAIR  (Ref: MM101SD)

LATHE & MILL DVD 101 - MILL & LATHE SPINDLE & GEARBOX REPAIR

SPECIAL OFFER £9.95 INC VAT !! - ONLY WHILE STOCKS LAST

We don't like to think about it, but machines break, and always at the worst possible time! This volume will show you how to do spindle and gearbox repairs on BOTH your mini mill and lathe!

Both machines are subjected to a total drive train teardown, rebuild and reassembly on-camera.

You'll learn how to teardown and reassemble the entire unit in just a few hours, and using a simple set of spacers and plates to enable you to press your spindle and bearings in and out of the machine.

Also there is a CD-ROM INCLUDED with mechanical drawings in multiple formats of these simple repair tools designed by Chris Wood of Littlemachineshop.com.

You can make these tools yourself -- JUST MAKE SURE YOU DO IT BEFORE YOUR MACHINE BREAKS!

Running time: 1 hour 17 minutes

4.00 4.80


Quantity: 

People who bought LATHE & MILL DVD 101 - MILL & LATHE SPINDLE & GEARBOX REPAIR also bought::

1. Set of 12 Solid Carbide Burrs
2. New Spindle Type Die Holder 13/16" 40 % OFF
3. LATHE DVD - 101 VOL 2 - BEYOND THE THREE JAW CHUCK





Cabin Fever - 1999- 2000 - 2001 CLEARANCE PRICE ! (Ref: DVD12)

Cabin Fever - 1999- 2000 - 2001 CLEARANCE PRICE !

Youve been to the Model Engineering Shows in the Uk- Well heres your chance to see how its done in the US!!
This DVD is 2 hours long and covers three years worth of sights, sounds and almost the smells of the Cabin Fever Expo.
Examine and enjoy these spectacular marvels of model engineering up close and in your face. in every glorious detail. Marvel at the intricate linkages and movements of these amazing creations. These shows are not only for models. There are also numerous tool and machinery dealers there as well as large live steam train layouts etc.
Running Time 2 Hours

SPECIAL OFFER £9.95 INC VAT !! - ONLY WHILE STOCKS LAST

4.99 5.99


Quantity: 

People who bought Cabin Fever - 1999- 2000 - 2001 CLEARANCE PRICE ! also bought::

1. Mini Machines 101 General Machinist Series Toolmaking & Restoration DVD
2. Double Ended Scriber
3. Optical Centrepunch SORRY OUT OF STOCK





MILLING DVD- Mini Machines 101 Vol. 1: Mill Basics & Clamping  (Ref: MD1)

MILLING DVD- Mini Machines 101 Vol. 1: Mill Basics   & Clamping

SPECIAL OFFER £9.95 INC VAT !! - ONLY WHILE STOCKS LAST

n this volume, we'll discuss the basics of the mill, from terminology and basic clamping, all the way to specialized fixtures and appliances for multi-part production.
Along the way, we'll cover some of the tools and equipment you'll most likely need, and delve into how and why to make specialized fixtures.

Section 1: Introduction and Safety
Section 2: Terminolgy and Nomenclature, Tools and Equipment, Clamping Basics
Section 3: Squaring (aligning) the Stock, Squaring Round Stock, Setting up the Screwless Vise, Bedplates & Specialized Fixtures
Running time: 50 minutes

8.29 9.95


Quantity: 


OUT OF STOCK





New Spindle Type Die Holder 13/16" 40 % OFF (Ref: NSDH1316)

New Spindle Type Die Holder 13/16

New!!- Exclusive to Chronos. These are similar to the above but are much more substantial. The knurled body SLIDES on a 3/4 diameter shaft which in tur steps doen to a 3/8 diameter spindle which can easily be held in your drill chuck etc. Superb quality and value!.

NOTE LISTING IS FOR ONE UNIT- THE PICTURE SHOWS 2 UNITS SO AS TO ILLUSTRATE BOTH ENDS OF THE ITEM

40% OFF WHILE STOCKS LAST- WAS £13.13 INC

6.56 7.87


Quantity: 

People who bought New Spindle Type Die Holder 13/16" 40 % OFF also bought::

1. 3/8 BRASS ROUND
2. EPDM O Rings Suitable for glands , packing , water pumps etc
3. 8 BA HSS PLUG TAP





Set of 3 Assorted 165mm Carbide Tipped Blades (Ref: SDY2261)

Set of 3 Assorted 165mm Carbide Tipped Blades

165mm Dia - 2.6 mm thick with a 30mm bore
Set of 3 - 40T 14T and 24T

25.46 30.55


Quantity: 





Set of 3 Assorted 185mm Carbide Tipped Blades (Ref: SDY2262)

Set of 3 Assorted 185mm Carbide Tipped Blades

185mm Dia - 2.6 mm thick with a 30mm bore
Set of 3 - 40T 14T and 24T

9.99 11.99


Quantity: 

People who bought Set of 3 Assorted 185mm Carbide Tipped Blades also bought::

1. Combination Lathe Test Bar MT2 / MT3
2. Set of Imperial Extra Long Series HSS Drills
3. Set of Three Sleeves





Quality Traditional Toolmakers Chest - SLIGHT SECONDS ! LIMITED QTY ! SOLD OUT (Ref: S1003178S)

Quality Traditional Toolmakers Chest - SLIGHT SECONDS ! LIMITED QTY ! SOLD OUT

Click Here for more Pictures



WE HAVE A NUMBER OF THESE TOOLCHESTS WHICH WE CLASS AS SLIGHT SECONDS. BY THESE WE MEAN THEY HAVE SOME SMALL DEFECTS THAT WE WOULD NOT BE HAPPY SENDING OUT AT FULL PRICE . THESE DEFECTS ARE THINGS SUCH AS LIGHT SCRATCHES , STICKY HINGES , DISCOLOURING OF BRASS FITTINGS , SLIGHT PEELING BACK OF FELT LINING ETC . PLEASE SEE THE LINK FOR SOME PHOTOGRAPHS
WE ONLY HAVE LIMITED QTYS SO FIRST COME FIRST SERVED




This is a traditional Toolmakers style chest constructed in solid wood. This chest has a locking front panel and 2 keys are supplied.
Overall size is
490mm w x 255mm d x 385mm h
The 6 upper drawers are 205 mm x 185 mm x 25 mm
The 2 lower drawers are 460 mm x 185 mm x 45 mm
The Top Storage area is 460mm x 230mm x 60mm

The unit is of Hard Wood construction with tongue and groove joinery which insures strength and durability. The Hardwood design also provides protection from moisture. Green felt-lined interior provides cushioning. Hand rubbed stain with lacquer finish. Quality brass hinges and corner protectors. Front lid stows under drawers in the open position, and covers drawers in locked position.

CLICK THE IMAGE FOR A LARGER PICTURE

SORRY- THIS IS ONLY SUITABLE FOR DELIVERY WITHIN THE UK MAINLAND

58.29 69.95



People who bought Quality Traditional Toolmakers Chest - SLIGHT SECONDS ! LIMITED QTY ! SOLD OUT also bought::

1. SET OF 8 CARBIDE BURRS 1/4 Shank





Telescopic Pick-Up with Lights and Mirrors - Linear Code:  (Ref: 59-690-125)

Telescopic Pick-Up with Lights and Mirrors - Linear Code:

HALF PRICE ! - 8 UNITS ONLY !

Telescopic Pick-Up With Light and Mirrors
1 x Handle complete with Torch and Extending Aluminium Shaft
Handle length: with shaft in closed position 190mm, shaft extended 870mm
3 x Viewing Mirrors: 18 x 60mm, 45 x 68mm, 60 x 90mm
1 x Plastic Magnifier
2 x Magnetic Pickup Heads: 12mm & 20mm diameter
Powered by 2 x AA battery (included)

21.00 25.20


Quantity: 

People who bought Telescopic Pick-Up with Lights and Mirrors - Linear Code: also bought::

1. 3MT Interchangeable Point Live Centre SORRY OUT OF STOCK
2. Titanium Coated Milling Cutter Sets Imperial
3. Titanium Coated Milling Cutter Sets Metric








Clearance Items - Buy online at Chronos (call us or click live chat for help with Clearance Items)
Visit our engineering blog