Lathe Quick Change Toolposts



Multifix 5pc 40 Position Quick Change Toolpost 120 - 220 Swing (Ref: OSA0)

Multifix 5pc 40 Position Quick Change Toolpost 120 - 220 Swing

5 pc 40 position quick change tool post and holders (Europe style)
CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTIRE

FEATURES
1. Cam-lock handle rigidity locks & quickly releases the tool holder

2. Correct height of cutting edge is easily & accurately adjusted by special set screws
3. Tools can be reground without removal form tool holder so the setting remains unaltered

4. 40 different angles are conveniently selected from position dials with marker

5. Holders are interchangeable with most other brands of 40 position tool post

6.Tool Post:HRC 50±2 degree after heat-treatment

Toolholder:HRC 42±2 degree after heat-treatment

DESIGN:
1.Basic body and tool holder are made of high-quality steel
which is hardened and ground

2.The tool holder is clamped against the basic body by an eccentric cam system
The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder.
Application:
Quick-change tool holders are characteried by their unlimited diversity in th use of lathe tools,drills,reamers and boring bars.

Includes 3 standard holders & one boring holder









183.08 219.70


Quantity: 

People who bought Multifix 5pc 40 Position Quick Change Toolpost 120 - 220 Swing also bought::

1. Spare Toolholder for OSA0 Multifix Quick Change Toolpost SORRY OUT OF STOCK
2. Eze-Lap Credit Card Stone-Pack of 2 Super Fine / Medium 2 Stone Set


Related products:
1. Spare Toolholder for OSA0 Multifix Quick Change Toolpost SORRY OUT OF STOCK (Ref: 540010)





Spare Toolholder for OSA0 Multifix Quick Change Toolpost SORRY OUT OF STOCK (Ref: 540010)

Spare Toolholder for OSA0 Multifix Quick Change Toolpost  SORRY OUT OF STOCK

Spare Toolholder for OSA0 Multifix Quick Change Toolpost




26.33 31.60



People who bought Spare Toolholder for OSA0 Multifix Quick Change Toolpost SORRY OUT OF STOCK also bought::

1. Multifix 5pc 40 Position Quick Change Toolpost 120 - 220 Swing
2. TYPE 6 HSS BORING TOOL 6 MM SQ S
3. Eze-Lap Credit Card Stone-Pack of 2 Super Fine / Medium 2 Stone Set





Multifix 5pc 40 Position Quick Change Toolpost 150 - 300 Swing SORRY OUT OF STOCK (Ref: OSA1)

Multifix 5pc 40 Position Quick Change Toolpost 150 - 300 Swing SORRY OUT OF STOCK

5 pc 40 position quick change tool post and holders (Europe style)
CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTIRE

FEATURES
1. Cam-lock handle rigidity locks & quickly releases the tool holder

2. Correct height of cutting edge is easily & accurately adjusted by special set screws
3. Tools can be reground without removal form tool holder so the setting remains unaltered

4. 40 different angles are conveniently selected from position dials with marker

5. Holders are interchangeable with most other brands of 40 position tool post

6.Tool Post:HRC 50±2 degree after heat-treatment

Toolholder:HRC 42±2 degree after heat-treatment

DESIGN:
1.Basic body and tool holder are made of high-quality steel
which is hardened and ground

2.The tool holder is clamped against the basic body by an eccentric cam system
The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder.
Application:
Quick-change tool holders are characteried by their unlimited diversity in th use of lathe tools,drills,reamers and boring bars.

Includes 3 standard holders & one boring holder









220.00 264.00



People who bought Multifix 5pc 40 Position Quick Change Toolpost 150 - 300 Swing SORRY OUT OF STOCK also bought::

1. Spare Toolholder for OSA1 Multifix Quick Change Toolpost SORRY OUT OF STOCK
2. New Small Body 2MT Live Centre
3. Set of 16 mm Glanze Mini Indexable Turning Tools


Related products:
1. Spare Toolholder for OSA1 Multifix Quick Change Toolpost SORRY OUT OF STOCK (Ref: 540115)





Spare Toolholder for OSA1 Multifix Quick Change Toolpost SORRY OUT OF STOCK (Ref: 540115)

Spare Toolholder for OSA1 Multifix Quick Change Toolpost  SORRY OUT OF STOCK

Spare Toolholder for OSA0 Multifix Quick Change Toolpost





28.87 34.64



People who bought Spare Toolholder for OSA1 Multifix Quick Change Toolpost SORRY OUT OF STOCK also bought::

1. Multifix 5pc 40 Position Quick Change Toolpost 150 - 300 Swing SORRY OUT OF STOCK
2. New Small Body 2MT Live Centre
3. Set of 16 mm Glanze Mini Indexable Turning Tools





Multifix 5pc 40 Position Quick Change Toolpost 200 - 400 Swing SORRY OUT OF STOCK (Ref: OSE5)

Multifix 5pc 40 Position Quick Change Toolpost 200 - 400 Swing  SORRY OUT OF STOCK

5 pc 40 position quick change tool post and holders (Europe style)
CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTIRE

FEATURES
1. Cam-lock handle rigidity locks & quickly releases the tool holder

2. Correct height of cutting edge is easily & accurately adjusted by special set screws
3. Tools can be reground without removal form tool holder so the setting remains unaltered

4. 40 different angles are conveniently selected from position dials with marker

5. Holders are interchangeable with most other brands of 40 position tool post

6.Tool Post:HRC 50±2 degree after heat-treatment

Toolholder:HRC 42±2 degree after heat-treatment

DESIGN:
1.Basic body and tool holder are made of high-quality steel
which is hardened and ground

2.The tool holder is clamped against the basic body by an eccentric cam system
The system allows a repeat accuracy of 0.01 mm with 40 possible angular positions of the tool holder.
Application:
Quick-change tool holders are characteried by their unlimited diversity in th use of lathe tools,drills,reamers and boring bars.

Includes 3 standard holders & one boring holder









262.46 314.95



People who bought Multifix 5pc 40 Position Quick Change Toolpost 200 - 400 Swing SORRY OUT OF STOCK also bought::

1. 160mm 3 Jaw Self Centering Chuck K11160
2. 160 mm Diameter Unmachined Backplate
3. Wavy Parallels


Related products:
1. Spare Toolholder for OSE5 Multifix Quick Change Toolpost (Ref: 540211)





Spare Toolholder for OSE5 Multifix Quick Change Toolpost  (Ref: 540211)

Spare Toolholder for OSE5 Multifix Quick Change Toolpost

Spare Toolholder for OSE5 Multifix Quick Change Toolpost






38.77 46.52


Quantity: 

People who bought Spare Toolholder for OSE5 Multifix Quick Change Toolpost also bought::

1. Glanze CCMT Indexable Boring Bar Set with 4 Inserts 6 MM Shank
2. 1-2-3 Blocks
3. Set of 2 Toolmakers Clamps 2 1/2 " **SPECIAL OFFER** SORRY OUT OF STOCK





3pc Quick Change Toolpost to Suit Myford ML7  (Ref: 390001)

3pc Quick Change Toolpost to Suit Myford ML7

Superb quality quick change toolpost for ML7 and similar lathes. All parts hardened and ground .
Main Block 2 1 /4" square x 1 1/2 " high with a 7/16 Bore. The aperture in the toolholders is 1/2 "
Set comes complete with 2 standard holders
New Extended Holder now available as an optional extra- see below

CLICK THE IMAGE FOR A LARGER PICTURE

This toolpost is suitable for 5/16 (8mm) and some types of 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools

PLEASE NOTE - DIAGRAM BELOW IS FOR REFERENCE ONLY - THIS KIT ONLY INCLUDE THE ITEMS LISTED AND IN THE PHOTO



54.99 65.99


Quantity: 

People who bought 3pc Quick Change Toolpost to Suit Myford ML7 also bought::

1. Soba 1/4 HSS Boring Tool & Holder
2. Soba Precision Live Centre 2 MT
3. Soba 3/16 HSS Boring Tool & Holder SORRY OUT OF STOCK





Boxford Quick Change Toolpost with 3 Standard Holders SORRY OUT OF STOCK (Ref: 390202)

Boxford Quick Change Toolpost with 3 Standard Holders  SORRY OUT OF STOCK

Superb quality quick change toolpost for Boxford and similar lathes. All parts hardened and ground .
Main Block 3" square x 2" high with a 5/8 Bore. Set comes complete with 3 standard holders



79.00 94.80



People who bought Boxford Quick Change Toolpost with 3 Standard Holders SORRY OUT OF STOCK also bought::

1. REPLACEMENT TOOLPOST STUD FOR BOXFORD LATHE
2. Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK
3. Extended Holder for BOXFORD QC Toolpost


Related products:
1. Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK (Ref: 390234)
2. Spare Parting Blade Holder for Boxford T1 Compatible (Ref: BFSP)
3. Spare Parting Blade for Boxford Type Holder (Ref: PT009)
4. Spare Boring Holder for Boxford T1 Compatible (Ref: BFSB)
5. Extended Holder for BOXFORD QC Toolpost (Ref: XP64)





New T2 Size Quick Change Toolpost System With 3 Holders  (Ref: 390302)

New T2 Size Quick Change Toolpost System  With 3 Holders

Superb quality quick change toolpost for Larger lathes. All parts hardened and ground .
Main Block 97 mm square x 72 mm high with a 25.4mm Bore. Set comes complete with three holders



189.88 227.86


Quantity: 

People who bought New T2 Size Quick Change Toolpost System With 3 Holders also bought::

1. Soba 75mm Bench Vice
2. Soba 150mm Bench Vice
3. 3/4" Shank Knurling Tool


Related products:
1. Spare Holder for T2 Toolpost (Ref: T2S)





Economy Quick Change Toolpost  (Ref: QCT1)

Economy Quick Change Toolpost

A useful but inexpensive quick change toolpost with one standard holder. Block size - 2 1/4" x 2 1/4" x 1 1/4" high. Toolholder capacity 1/2" .3/8centre hole(can be modified)

26.42 31.70


Quantity: 

People who bought Economy Quick Change Toolpost also bought::

1. Spare Holder for QCT1/ 4 Enonomy Quick Change
2. 3/4" Shank Knurling Tool





Economy Quick Change Toolpost Starter Set SORRY OUT OF STOCK (Ref: QCT4)

Economy Quick Change Toolpost Starter Set     SORRY OUT OF STOCK

A useful but inexpensive quick change toolpost with four holdes. Block size - 21/4 " x 2 1/4" x 1 1/4" high. Comes with 3 holders with a 1/2" capacity and 1 holder with a 3/4" " .3/8 centre hole(can be modified)

48.84 58.61



People who bought Economy Quick Change Toolpost Starter Set SORRY OUT OF STOCK also bought::

1. ER25 COLLET 4-5 MM
2. ER25 COLLET 3-4 MM
3. ER25 COLLET 2-3 MM





Spare Holder for QCT1/ 4 Enonomy Quick Change  (Ref: QCT2)

Spare Holder for QCT1/ 4  Enonomy Quick Change

Spare Holder for QCT1 and QCT 4 Toolposts - 22mm capacity

9.12 10.94


Quantity: 

People who bought Spare Holder for QCT1/ 4 Enonomy Quick Change also bought::

1. Economy Quick Change Toolpost Starter Set SORRY OUT OF STOCK
2. Economy Quick Change Toolpost
3. New Professional Parting System





5pc Quick Change Toolpost to Suit Myford ML7  (Ref: 390300)

5pc Quick Change Toolpost to Suit Myford  ML7

Superb quality quick change toolpost for ML7 and similar lathes. All parts hardened and ground .
Main Block 2 1 /4" square x 1 1/2 " high with a 7/16 Bore. 1/2" tool capacity
Set comes complete with two standard holders,one boring holder and 1 parting holder
New Extended Holder now available as an optional extra- see below

CLICK THE IMAGE FOR A LARGER PICTURE

This toolpost is suitable for 5/16 (8mm) and some types of 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools

PLEASE NOTE - DIAGRAM BELOW IS FOR REFERENCE ONLY - THIS KIT ONLY INCLUDE THE ITEMS LISTED AND IN THE PHOTO



76.00 91.20


Quantity: 

People who bought 5pc Quick Change Toolpost to Suit Myford ML7 also bought::

1. New Small Body 2MT Live Centre for Myford Lathes
2. TYPE 9 HSS INTERNAL THREADING TOOL 10MM SQ
3. TYPE 6 HSS BORING TOOL 10 MM SQ





4pc Quick Change Toolpost to Suit Myford ML7  (Ref: 390201.)

4pc Quick Change Toolpost to Suit Myford  ML7

Superb quality quick change toolpost for ML7 and similar lathes. All parts hardened and ground .
Main Block 2 1 /4" square x 1 1/2 " high with a 7/16 Bore. 1/2" tool capacity
Set comes complete with 3 standard holders
New Extended Holder now available as an optional extra- see below

CLICK THE IMAGE FOR A LARGER PICTURE

This toolpost is suitable for 5/16 (8mm) and some types of 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools

PLEASE NOTE - DIAGRAM BELOW IS FOR REFERENCE ONLY - THIS KIT ONLY INCLUDE THE ITEMS LISTED AND IN THE PHOTO



69.99 83.99


Quantity: 

People who bought 4pc Quick Change Toolpost to Suit Myford ML7 also bought::

1. Spare Parting Blade Holder Myford Quick Change Toolpost
2. Spare Parting Blade 1/2 SORRY OUT OF STOCK
3. Extended Holder for ML7 QC Toolpost-





3pc Quick Change Toolpost to Suit Myford ML7  (Ref: 390001)

3pc Quick Change Toolpost to Suit Myford ML7

Superb quality quick change toolpost for ML7 and similar lathes. All parts hardened and ground .
Main Block 2 1 /4" square x 1 1/2 " high with a 7/16 Bore. The aperture in the toolholders is 1/2 "
Set comes complete with 2 standard holders
New Extended Holder now available as an optional extra- see below

CLICK THE IMAGE FOR A LARGER PICTURE

This toolpost is suitable for 5/16 (8mm) and some types of 3/8 (10mm) square lathe tools as centre height cannot be reached using larger tools

PLEASE NOTE - DIAGRAM BELOW IS FOR REFERENCE ONLY - THIS KIT ONLY INCLUDE THE ITEMS LISTED AND IN THE PHOTO



54.99 65.99


Quantity: 

People who bought 3pc Quick Change Toolpost to Suit Myford ML7 also bought::

1. Soba 1/4 HSS Boring Tool & Holder
2. Soba Precision Live Centre 2 MT
3. Soba 3/16 HSS Boring Tool & Holder SORRY OUT OF STOCK





Glanze 4 PC Lathe Starter Set With 10 MM Shank For Myford Size QC Toolposts  (Ref: 777701Q)

Glanze 4 PC Lathe Starter Set With 10 MM Shank For Myford Size QC Toolposts

CLICK HERE FOR THE DATA SHEET

New ! Exclusive to Chronos !

TURNING - PARTING - THREADING - BORING


CONTENTS

Glanze Indexable Parting Tool with Blade & Insert- 10 mm Shank

Glanze SDNCN Straight Indexable Turning Tools with DCMT Insert - 10 mm Shank

Glanze Metric Internal Threading Tool with Carbide Insert - 10 mm Shank

Glanze STUCR Indexable Boring Bar with TCMT Insert - 10mm Shank

CLICK THE IMAGE FOR A LARGER PICTURE







78.57 94.28


Quantity: 

People who bought Glanze 4 PC Lathe Starter Set With 10 MM Shank For Myford Size QC Toolposts also bought::

1. Set of 4 Solid Cobalt Ball Nosed Endmills Metric
2. R8 Arbor for 16mm Bore Cutters
3. SET OF 10 CCMT CARBIDE INSERTS TRIPLE COATED (BLACK)





SPECIAL OFFER SINGLE SPARE HOLDER TO SUIT MYFORD TOOLPOSTS - SOBA BRAND SORRY OUT OF STOCK (Ref: EMFSS)

SPECIAL OFFER SINGLE  SPARE HOLDER TO SUIT MYFORD TOOLPOSTS  - SOBA BRAND       SORRY OUT OF STOCK

QUICKCHANGE TOOLHOLDER, - THIS IS A TOP QUALITY TOOL SPARE HOLDER IT SUITS ALL THE T00 DIXON STYLE BLOCKS THAT ARE FITTED TO MYFORD ML7 & SUPER 7 LATHES - ACCEPTS SHANKS UP TO 1/2 SQUARE. - BRAND NEW, FULLY HARDENED AND GROUND.





14.85 17.82



People who bought SPECIAL OFFER SINGLE SPARE HOLDER TO SUIT MYFORD TOOLPOSTS - SOBA BRAND SORRY OUT OF STOCK also bought::

1. Spare Holder for QCT1/ 4 Enonomy Quick Change
2. 3/4 SQUARE MILD STEEL
3. 9/16 MILD STEEL ROUND





SPECIAL OFFER TWO SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS - SOBA BRAND SORRY OUT OF STOCK (Ref: EMFS2)

SPECIAL OFFER TWO SPARE HOLDERS   TO SUIT MYFORD TOOLPOSTS   - SOBA BRAND   SORRY OUT OF STOCK

SPECIAL OFFER FOR LIMITED PERIOD. TWO QUICKCHANGE TOOLHOLDERS, - THESE ARE TOP QUALITY SPARE TOOLHOLDERS TO SUIT ALL THE T00 DIXON STYLE BLOCKS THAT ARE FITTED TO MYFORD ML7 & SUPER 7 LATHES - ACCEPTS SHANKS UP TO 1/2 SQUARE. - BRAND NEW, FULLY HARDENED AND GROUND,





29.00 34.80



People who bought SPECIAL OFFER TWO SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS - SOBA BRAND SORRY OUT OF STOCK also bought::

1. Set of 8 SCT Solid HSS Lathe Turning Tools 8 mm Square
2. HEAT JOINED PLASTIC DRIVE BELT 1/8 DIAMETER
3. Spare Boring Holder for above





SPECIAL OFFER THREE SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS SORRY OUT OF STOCK  (Ref: EMFS3)

SPECIAL OFFER THREE SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS  SORRY OUT OF STOCK

SPECIAL OFFER FOR LIMITED PERIOD. THREE QUICKCHANGE TOOLHOLDERS, - THESE ARE TOP QUALITY SPARE TOOL HOLDERS THAT SUIT ALL THE T00 DIXON STYLE BLOCKS THAT ARE FITTED TO MYFORD ML7 & SUPER 7 LATHES - ACCEPTS SHANKS UP TO 1/2 SQUARE. - BRAND NEW, FULLY HARDENED AND GROUND .




43.00 51.60



People who bought SPECIAL OFFER THREE SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS SORRY OUT OF STOCK also bought::

1. Spare Boring Holder for above
2. Set of 13 ER11 Collets
3. Extended Holder for ML7 QC Toolpost-





SPECIAL OFFER FOUR SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS SORRY OUT OF STOCK  (Ref: EMFS4)

SPECIAL OFFER FOUR SPARE HOLDERS   TO SUIT MYFORD TOOLPOSTS    SORRY OUT OF STOCK

SET OF FOUR QUICKCHANGE TOOLHOLDERS, - THESE ARE TOP QUALITY SPARE TOOLHOLDERS TO SUIT ALL THE T00 DIXON STYLE BLOCKS THAT ARE FITTED TO MYFORD ML7 & SUPER 7 LATHES - ACCEPTS SHANKS UP TO 1/2 SQUARE. - BRAND NEW, FULLY HARDENED AND GROUND,




54.00 64.80






SPECIAL OFFER FIVE SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS SORRY OUT OF STOCK  (Ref: EMFS5)

SPECIAL OFFER FIVE SPARE HOLDERS  TO SUIT MYFORD TOOLPOSTS SORRY OUT OF STOCK

SET OF FIVE QUICKCHANGE TOOLHOLDERS, - THESE ARE TOP QUALITY SPARE TOOLHOLDERS TO SUIT ALL THE T00 DIXON STYLE BLOCKS THAT ARE FITTED TO MYFORD ML7 & SUPER 7 LATHES - ACCEPTS SHANKS UP TO 1/2 SQUARE. - BRAND NEW, FULLY HARDENED AND GROUND,




65.00 78.00



People who bought SPECIAL OFFER FIVE SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS SORRY OUT OF STOCK also bought::

1. Extended Holder for ML7 QC Toolpost-
2. SCT 10 pc ER25 Collet set & 3MT Holder
3. Universal Adjustable Tailstock for 100mm / 4" Rotary Tables





Spare Parting Blade Holder Myford Quick Change Toolpost  (Ref: MFSP)

Spare Parting Blade Holder Myford Quick Change Toolpost

Accepts a standard 1/2 HSS parting Blade

15.93 19.12


Quantity: 

People who bought Spare Parting Blade Holder Myford Quick Change Toolpost also bought::

1. Spare Parting Blade 1/2 SORRY OUT OF STOCK
2. 4pc Quick Change Toolpost to Suit Myford ML7
3. Extended Holder for ML7 QC Toolpost-





Spare Parting Blade 1/2 SORRY OUT OF STOCK (Ref: PT006)

Spare Parting Blade 1/2   SORRY OUT OF STOCK



4.75 5.70



People who bought Spare Parting Blade 1/2 SORRY OUT OF STOCK also bought::

1. Spare Parting Blade Holder Myford Quick Change Toolpost
2. Mini Wedge Type Quick Change Toolpost Set
3. Spare Boring Holder for above





Spare Boring Holder for above  (Ref: MFSB)

Spare Boring Holder for above

Spare boring bar holder for Myford sized Quick Change Toolpost
CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE





15.00 18.00


Quantity: 

People who bought Spare Boring Holder for above also bought::

1. Spare Parting Blade 1/2 SORRY OUT OF STOCK
2. Glanze Right Hand Turning & Facing Tool 8 mm Square Shank
3. 1 1/8 X 12 TPI TAPER TAP - MYFORD THREAD





Extended Holder for ML7 QC Toolpost-  (Ref: 390216)

Extended Holder for ML7 QC Toolpost-

As featured in Model Engineer Magazine. This toolholder is 3 1/2 " long and are very useful in that it provides extra clearance from the block and this is a vast improvement in may turning applications.

18.17 21.80


Quantity: 

People who bought Extended Holder for ML7 QC Toolpost- also bought::

1. Spare Parting Blade Holder Myford Quick Change Toolpost
2. SPECIAL OFFER FIVE SPARE HOLDERS TO SUIT MYFORD TOOLPOSTS SORRY OUT OF STOCK
3. 4pc Quick Change Toolpost to Suit Myford ML7





5pc Quick Change Toolpost to Suit Boxford Etc SORRY OUT OF STOCK (Ref: 390301)

5pc Quick Change Toolpost to Suit Boxford Etc      SORRY OUT OF STOCK

Superb quality quick change toolpost for Boxford and similar lathes. All parts hardened and ground .
Main Block 3" square x 2" high with a 5/8 Bore. Set comes complete with two standard holders,one boring holder and 1 parting holder





99.00 118.80



People who bought 5pc Quick Change Toolpost to Suit Boxford Etc SORRY OUT OF STOCK also bought::

1. REPLACEMENT TOOLPOST STUD FOR BOXFORD LATHE
2. Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK
3. Extended Holder for BOXFORD QC Toolpost





Boxford Quick Change Toolpost with 3 Standard Holders SORRY OUT OF STOCK (Ref: 390202)

Boxford Quick Change Toolpost with 3 Standard Holders  SORRY OUT OF STOCK

Superb quality quick change toolpost for Boxford and similar lathes. All parts hardened and ground .
Main Block 3" square x 2" high with a 5/8 Bore. Set comes complete with 3 standard holders



79.00 94.80



People who bought Boxford Quick Change Toolpost with 3 Standard Holders SORRY OUT OF STOCK also bought::

1. REPLACEMENT TOOLPOST STUD FOR BOXFORD LATHE
2. Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK
3. Extended Holder for BOXFORD QC Toolpost


Related products:
1. Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK (Ref: 390234)
2. Spare Parting Blade Holder for Boxford T1 Compatible (Ref: BFSP)
3. Spare Parting Blade for Boxford Type Holder (Ref: PT009)
4. Spare Boring Holder for Boxford T1 Compatible (Ref: BFSB)
5. Extended Holder for BOXFORD QC Toolpost (Ref: XP64)





Boxford Quick Change Toolpost with 2 Holders SORRY OUT OF STOCK (Ref: 390002)

Boxford Quick Change Toolpost with 2 Holders  SORRY OUT OF STOCK

Superb quality quick change toolpost for Boxford and similar lathes. All parts hardened and ground .

Main Block 3" square x 2" high with a 5/8 Bore. Set comes complete with 2 standard holders
Tool capacity 16 mm





66.24 79.49



People who bought Boxford Quick Change Toolpost with 2 Holders SORRY OUT OF STOCK also bought::

1. REPLACEMENT TOOLPOST STUD FOR BOXFORD LATHE
2. 125mm 3 Jaw Self Centering Chuck
3. Spare Parting Blade Holder for Boxford T1 Compatible





Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK (Ref: 390234)

Spare Standard Holder for Boxford Quick Change Toolpost  T1 Compatible SORRY OUT OF STOCK


QUICKCHANGE TOOLHOLDER, - FITS BISON/DIXON/SHOBHA ETC - THIS IS A TOP QUALITY TOOL SPARE HOLDER - BRAND NEW, FULLY HARDENED AND GROUND.Capacity 16mm

19.64 23.57



People who bought Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK also bought::

1. Extended Holder for BOXFORD QC Toolpost
2. Boxford Quick Change Toolpost with 3 Standard Holders SORRY OUT OF STOCK
3. Spare Boring Holder for Boxford T1 Compatible





Spare Parting Blade Holder for Boxford T1 Compatible  (Ref: BFSP)

Spare Parting Blade Holder for Boxford T1 Compatible

Accepts a standard 3/4 HSS parting Blade

21.86 26.23


Quantity: 

People who bought Spare Parting Blade Holder for Boxford T1 Compatible also bought::

1. Spare Parting Blade for Boxford Type Holder
2. REPLACEMENT TOOLPOST STUD FOR BOXFORD LATHE
3. Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK





Spare Parting Blade for Boxford Type Holder  (Ref: PT009)

Spare Parting Blade for Boxford Type Holder

Spare HSS Parting Blade for Boxford Parting Holder

13.62 16.34


Quantity: 

People who bought Spare Parting Blade for Boxford Type Holder also bought::

1. Spare Parting Blade Holder for Boxford T1 Compatible
2. Set of Three Sleeves
3. Morse Taper Sleeves- MT2-MT3 Tang End





Spare Boring Holder for Boxford T1 Compatible (Ref: BFSB)

Spare Boring Holder for Boxford T1 Compatible



22.86 27.43


Quantity: 

People who bought Spare Boring Holder for Boxford T1 Compatible also bought::

1. Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK
2. Extended Holder for BOXFORD QC Toolpost
3. Set of Three Sleeves





Extended Holder for BOXFORD QC Toolpost  (Ref: XP64)

Extended Holder for BOXFORD  QC Toolpost

As featured in Model Engineer Magazine. This toolholder is 3 7/8 " long and are very useful in that it provides extra clearance from the block and this is a vast improvement in may turning applications.

100 mm Long
32 mm high
Tool Gap 15 mm



22.72 27.26


Quantity: 

People who bought Extended Holder for BOXFORD QC Toolpost also bought::

1. Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK
2. Spare Boring Holder for Boxford T1 Compatible
3. 5pc Quick Change Toolpost to Suit Boxford Etc SORRY OUT OF STOCK





New T2 Size Quick Change Toolpost System With 3 Holders  (Ref: 390302)

New T2 Size Quick Change Toolpost System  With 3 Holders

Superb quality quick change toolpost for Larger lathes. All parts hardened and ground .
Main Block 97 mm square x 72 mm high with a 25.4mm Bore. Set comes complete with three holders



189.88 227.86


Quantity: 

People who bought New T2 Size Quick Change Toolpost System With 3 Holders also bought::

1. Soba 75mm Bench Vice
2. Soba 150mm Bench Vice
3. 3/4" Shank Knurling Tool


Related products:
1. Spare Holder for T2 Toolpost (Ref: T2S)





New T2 Size Quick Change Toolpost System With 2 Holders  (Ref: 390003)

New T2 Size Quick Change Toolpost System  With 2 Holders

Superb quality quick change toolpost for Larger lathes.

All parts hardened and ground .

Main Block 97 mm square x 72 mm high with a 25.4mm Bore. Set comes complete with one standard & one boring holder

CLICK THE IMAGE FOR A LARGER PICTURE




126.48 151.78


Quantity: 

People who bought New T2 Size Quick Change Toolpost System With 2 Holders also bought::

1. Spare Holder for T2 Toolpost


Related products:
1. Spare Holder for T2 Toolpost (Ref: T2S)





Glanze 4 PC Lathe Starter Set With 16 MM Shank For T2 QC Toolposts (Ref: 777703Q)

Glanze 4 PC Lathe Starter Set With 16 MM Shank For T2 QC Toolposts

CLICK HERE FOR THE DATA SHEET

New ! Exclusive to Chronos !

TURNING - PARTING - THREADING - BORING


CONTENTS

Glanze Indexable Parting Tool with Blade & Insert- 16 mm Shank

Glanze SDNCN Straight Indexable Turning Tools with DCMT Insert - 16 mm Shank

Glanze Metric Internal Threading Tool with Carbide Insert - 1 mm Shank

Glanze STUCR Indexable Boring Bar with TCMT Insert - 1 mm Shank

CLICK THE IMAGE FOR A LARGER PICTURE






77.78 93.34


Quantity: 





Spare Holder for T2 Toolpost  (Ref: T2S)

Spare Holder for T2 Toolpost



33.00 39.60


Quantity: 

People who bought Spare Holder for T2 Toolpost also bought::

1. New T2 Size Quick Change Toolpost System With 2 Holders
2. Extended Holder for BOXFORD QC Toolpost
3. Spare Standard Holder for Boxford Quick Change Toolpost T1 Compatible SORRY OUT OF STOCK





Quick Change Toolpost for Unimat 3 & 4 Lathes  (Ref: 390390)

Quick Change Toolpost for Unimat 3 & 4 Lathes

Complete with 2 Holders !
Post size 35 mm square x 45 mm high


29.95 35.94


Quantity: 

People who bought Quick Change Toolpost for Unimat 3 & 4 Lathes also bought::

1. Spare Holder for 390390 UnimatToolpost above
2. Spare Holder for UNX1 Toolpost above
3. 4 Jaw Independent Chuck FOR UNIMAT 3 & 4 SORRY OUT OF STOCK





Spare Holder for UNX1 Toolpost above  (Ref: UNX2...)

Spare Holder for UNX1 Toolpost above



7.39 8.87


Quantity: 

People who bought Spare Holder for UNX1 Toolpost above also bought::

1. Quick Change Toolpost for Unimat 3 & 4 Lathes
2. Economy Quick Change Toolpost Starter Set SORRY OUT OF STOCK
3. Right Hand Turning & Facing Tool 6 mm Square Shank





Spare Holder for Soba Small Piston Toolpost SORRY OUT OF STOCK (Ref: 390010S)

Spare Holder for Soba Small Piston Toolpost  SORRY OUT OF STOCK



10.00 12.00






Mini Wedge Type Quick Change Toolpost Set (Ref: 50053000)

Mini Wedge Type Quick Change Toolpost Set

CLICK HERE FOR DETAILED DIMENSIONS

Feature:
All steel construction.
Quickly and easily installed on your lathe.
Interchangeable with many other manufacturer's components.
Precision-engineered to assure repetitive accuracy. All working parts precision ground and hardened.
Perfect for 7 x 10", 7 x 12", 7 x 14" mini lathe
FOR LATHES WITH SWING 6 - 9"

Product description:
250-000  Tool Post
250-001  #1 Turning & Facing Holder
250-002  #2 Boring, Turning & Facing Holder
250-004  #4 Heavy-Duty Boring Bar Holder
250-007  #7 Universal Parting Blade Holder
250-010  #10 Knurling, Turning & Facing Holder

CLICK THE IMAGE FOR A LARGER PICTURE

PLEASE NOT - IT HAS COME TO OUR NOTICE THAT THE PARTING HOLDER MAY NOT BE SUITABLE TO ACHIEVE CENTRE ON SOME MINI LATHES

84.63 101.56


Quantity: 

People who bought Mini Wedge Type Quick Change Toolpost Set also bought::

1. Spare Parting Blade 1/2 SORRY OUT OF STOCK
2. The Metalworkers Workshop
3. Making Clocks Book


Related products:
1. Spare Parting Blade 1/2 SORRY OUT OF STOCK (Ref: PT006)





Spare Parting Blade 1/2 SORRY OUT OF STOCK (Ref: PT006)

Spare Parting Blade 1/2   SORRY OUT OF STOCK



4.75 5.70



People who bought Spare Parting Blade 1/2 SORRY OUT OF STOCK also bought::

1. Spare Parting Blade Holder Myford Quick Change Toolpost
2. Mini Wedge Type Quick Change Toolpost Set
3. Spare Boring Holder for above





MINI QUICK CHANGE TOOL POST AND HOLDER SET - PISTON TYPE (Ref: 40053101)

MINI QUICK CHANGE TOOL POST AND HOLDER SET - PISTON TYPE

This is a scaled down version of the well known Piston Type Toolpost Systems

CLICK THE IMAGE FOR A LARGER PICTURE

ALL STEEL

This NEW Mini Piston Type Quick Change Toolpost set provides instant tool changeover from one operation to another.
It is fully hardened and ground and the working parts have maximum rigidity and provide chatter free performance. Units are completely sealed for maintenance free operation. Each QC tool post set comes with 3 different styles of tool holders for turning, facing, and boring operations.

Suitable for Lathe swing 5"- 8".
Supplied with a T-nut, ( 1 1/2 x 3/4" x 5/16" thick ) 8 mm and 10 mm bolt for universal mounting to the compound rest.
Center height 1-1/8".
Toolholder width:1".
Each set includes:
1pc 250-065(piston type tool post)
2pcs 250-067(turning holder)
1pc 250-069(boring bar holder) - Takes 3/8 Diameter Boring Tools
1pc 250-071(cutoff holder) - Takes a standard 1/2 x 3/32 Parting Blade ( our product numbers 132475 or PT006 )





88.11 105.73


Quantity: 

People who bought MINI QUICK CHANGE TOOL POST AND HOLDER SET - PISTON TYPE also bought::

1. 1 Litre of Multispec Slideway Oil
2. 1/2 Pint Oil Cans
3. Set of 7 SCT Indexable Lathe Tools 10 mm Shank


Related products:
1. Spare Parting Blade 1/2 SORRY OUT OF STOCK (Ref: PT006)
2. Spare Chipbreaker Blade 3/32 thick x 1/2" wide x 4 1/2" long. M-35 HSS with 5% Cobalt (Ref: 132475)
3. Spare Standard Holder for 40053101 Quick Change Toolpost (Ref: 250067)





Spare Standard Holder for 40053101 Quick Change Toolpost (Ref: 250067)

Spare Standard Holder for 40053101 Quick Change Toolpost

Spare Standard Holder for 40053101 Quick Change Toolpost

12.28 14.74


Quantity: 

People who bought Spare Standard Holder for 40053101 Quick Change Toolpost also bought::

1. Spare Parting Blade 1/2 SORRY OUT OF STOCK
2. NEW Z TYPE EDGE FINDER 10mm
3. Centre Finder for Round Bar





Piston Type Toolpost Small SORRY OUT OF STOCK (Ref: 9511100)

Piston Type Toolpost Small   SORRY OUT OF STOCK

All working parts are hardened & ground . Maximum rigidity is maintained for chatter free performance. Each set is complete with five holders inc standard,boring,parting & knurling. This model suits lathes with up to a 12" swing . Block is 2 1/2" Square
Overall Height is 4 1/16". Tool capacity is 1/2






101.43 121.72



People who bought Piston Type Toolpost Small SORRY OUT OF STOCK also bought::

1. Parting Blade to Suit Small Piston Type Toolposts 3mm x 12 mm x 80 mm HSS
2. 8" Faceplate
3. Spare Standard Holder for 9511100 SORRY OUT OF STOCK





Parting Blade to Suit Small Piston Type Toolposts 3mm x 12 mm x 80 mm HSS (Ref: 505147)

Parting Blade to Suit Small  Piston Type Toolposts 3mm x 12 mm x 80 mm HSS



7.00 8.40


Quantity: 

People who bought Parting Blade to Suit Small Piston Type Toolposts 3mm x 12 mm x 80 mm HSS also bought::

1. Piston Type Toolpost Small SORRY OUT OF STOCK
2. Set of Two Traditional Style straight Tap Wrench M1-M12
3. Universal Centre Gauge





Spare Standard Holder for 9511100 SORRY OUT OF STOCK (Ref: 95111001)

Spare Standard Holder for 9511100    SORRY OUT OF STOCK

Spare standard toolholder for the above toolpost.


13.99 16.79



People who bought Spare Standard Holder for 9511100 SORRY OUT OF STOCK also bought::

1. Piston Type Toolpost Small SORRY OUT OF STOCK
2. HSS DRILL BIT 6.0 MM
3. M4 X 0.7 CARBON DIE





Piston Type Toolpost Medium  (Ref: 9511200)

Piston Type Toolpost Medium

All working parts are hardened & ground . Maximum rigidity is maintained for chatter free performance. Each set is complete with five holders inc standard,boring,parting & knurling. This model suits lathes with up to a 10 - 15" " swing
Block Size is 3" square. Overall Height is 5 9/16". Tool capacity is 5/8




103.12 123.74


Quantity: 

People who bought Piston Type Toolpost Medium also bought::

1. Spare Standard Holder for 9511200
2. 52 Pc Clamping Kit 16mm Slot 14mm Stud
3. 6" V Angle Plate





Spare Standard Holder for 9511200  (Ref: 95112001)

Spare Standard Holder for 9511200

Spare standard toolholder for the above toolpost.


16.02 19.22


Quantity: 

People who bought Spare Standard Holder for 9511200 also bought::

1. Piston Type Toolpost Medium
2. Glanze Right Hand Turning & Facing Tool 12 mm Square Shank
3. SET OF 10 CCGT CARBIDE INSERTS FOR GLANZE LATHE TOOLS- A SUPERIOR FINISH ON ALUMINIUM ETC !





Parting Blade to Suit Small Piston Type Toolposts 3mm x 12 mm x 80 mm HSS (Ref: 505147)

Parting Blade to Suit Small  Piston Type Toolposts 3mm x 12 mm x 80 mm HSS



7.00 8.40


Quantity: 

People who bought Parting Blade to Suit Small Piston Type Toolposts 3mm x 12 mm x 80 mm HSS also bought::

1. Piston Type Toolpost Small SORRY OUT OF STOCK
2. Set of Two Traditional Style straight Tap Wrench M1-M12
3. Universal Centre Gauge





Piston Type Toolpost Large  (Ref: 9511300)

Piston Type Toolpost Large

All working parts are hardened & ground . Maximum rigidity is maintained for chatter free performance. Each set is complete with five holders inc standard,boring,parting & knurling. This model suits lathes with up to a 13 - 18" " swing
Block Size is 3 1/2" Square . Overall Height is 6 1/8". Tool Capacity is 3/4



146.00 175.20


Quantity: 

People who bought Piston Type Toolpost Large also bought::

1. Spare Parting Blade 1/2 SORRY OUT OF STOCK





Spare Standard Holder for 9513000 Large Piston Toolpost  (Ref: 9513001)

Spare Standard Holder for 9513000 Large Piston Toolpost

Spare standard toolholder for the above toolpost.

22.00 26.40


Quantity: 

People who bought Spare Standard Holder for 9513000 Large Piston Toolpost also bought::

1. Glanze CCMT Indexable Boring Bar Set with 4 Inserts 16MM Shank
2. 1/2 " Adjustable Machine Tool Coolant Hose Boxed Set





Mini Quick Change Toolpost for Variable Speed Mini Lathes etc (Ref: 42248S01)

Mini Quick Change Toolpost for Variable Speed Mini Lathes etc

Description

This New Quick change Tool Post system is suitable for the Clarke CL300M Lathe and most of the simiilar 7 x 10 variable Speed Mini Lathes available today .

The Set Comprises

Toolpost
1 x 3/8 Boring Holder
1 x 1/2 Capacity Cut off parting blade holder
2 x 1/4 - 1/2 Standard Turning Tool Holders
2 x Mounting Bolts (M8 & M10)

Material: High quality aluminum





35.00 42.00


Quantity: 

People who bought Mini Quick Change Toolpost for Variable Speed Mini Lathes etc also bought::

1. HSS Parting Blade for Mini Quick Change Toolpost 42248S01 1/2 W x 3/32 Thick SORRY OUT OF STOCK
2. Set of Five BS3 HSS Centre Drills 1/4 Body Diameter
3. Glanze CCMT Indexable Boring Bar Set with 4 Inserts 8 MM Shank **SPECIAL OFFER**





HSS Parting Blade for Mini Quick Change Toolpost 42248S01 1/2 W x 3/32 Thick SORRY OUT OF STOCK (Ref: PT006..)

HSS Parting Blade for Mini Quick Change Toolpost 42248S01  1/2 W x 3/32 Thick    SORRY OUT OF STOCK



4.75 5.70



People who bought HSS Parting Blade for Mini Quick Change Toolpost 42248S01 1/2 W x 3/32 Thick SORRY OUT OF STOCK also bought::

1. Mini Quick Change Toolpost for Variable Speed Mini Lathes etc
2. Set of Five BS3 HSS Centre Drills 1/4 Body Diameter
3. 9pc TCT Boring Bar Sets with 3/8 Dia Shanks





Lathe Starter Set (Ref: LSS)

Lathe Starter Set

This super value starter kit comprises of quick change toolpost QCT1 (see previous page), left ,right and straight toolholders,four toolbits, boring holder BBH14,clamp type parting tool CTPT1 with hss blade and knurling tool type MKT1017.

68.30 81.96


Quantity: 








Lathe Quick Change Toolposts - Buy online at Chronos (call us or click live chat for help with Lathe Quick Change Toolposts)
Visit our engineering blog