Magnetic Chucks- Round



Bunting Standard Circular Magnetic Chuck 125mm Dia x 48 mm High (Ref: MC12548RA)

Bunting Standard Circular Magnetic Chuck 125mm Dia x 48 mm High

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

255.56 306.67


Quantity: 





Bunting Standard Circular Magnetic Chuck 160 mm Dia x 48 mm High (Ref: MC16048RA)

Bunting Standard Circular Magnetic Chuck 160 mm Dia x 48 mm High

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

321.89 386.27


Quantity: 





Bunting Standard Circular Magnetic Chuck 200 mm Dia x 52 mm High (Ref: MC20052RA)

Bunting Standard Circular Magnetic Chuck 200 mm Dia x 52 mm High

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

522.84 627.41


Quantity: 





Bunting Standard Circular Magnetic Chuck 250 mm Dia x 52 mm High (Ref: MC25052RA)

Bunting Standard Circular Magnetic Chuck 250 mm Dia x 52 mm High

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

774.50 929.40


Quantity: 





Bunting Fine Pitch Circular Magnetic Chuck 125mm Dia x 48 mm High (Ref: MC12548RAA)

Bunting Fine Pitch Circular Magnetic Chuck 125mm Dia x 48 mm High

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

267.27 320.72


Quantity: 





Bunting Fine Pitch Circular Magnetic Chuck 160 mm Dia x 48 mm High (Ref: MC16048RAA)

Bunting Fine Pitch  Circular Magnetic Chuck 160 mm Dia x 48 mm High

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

329.69 395.63


Quantity: 





Bunting Fine Pitch Circular Magnetic Chuck 200 mm Dia x 52 mm High (Ref: MC20052RAA)

Bunting Fine Pitch Circular Magnetic Chuck 200 mm Dia x 52 mm High

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

534.54 641.45


Quantity: 





Bunting Fine Pitch Circular Magnetic Chuck 250 mm Dia x 52 mm High (Ref: MC25052RAA)

Bunting Fine Pitch Circular Magnetic Chuck 250 mm Dia x 52 mm High

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

803.77 964.52


Quantity: 








Magnetic Chucks- Round - Buy online at Chronos (call us or click live chat for help with Magnetic Chucks- Round)
Visit our engineering blog