Magnetic Chucks- Rectangular



Bunting Rectangular Magnetic Chuck Standard Pitch 175 x 100 mm (Ref: MC175100SA)

Bunting Rectangular Magnetic Chuck Standard Pitch 175 x 100 mm

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

140.46 168.55


Quantity: 





Bunting Rectangular Magnetic Chuck Standard Pitch 250 x 125 mm (Ref: MC250125SA)

Bunting Rectangular Magnetic Chuck Standard Pitch 250 x 125 mm

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

173.62 208.34


Quantity: 





Bunting Rectangular Magnetic Chuck Standard Pitch 300 x 150 mm (Ref: MC300150SA)

Bunting Rectangular Magnetic Chuck Standard Pitch 300 x 150 mm

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

239.96 287.95


Quantity: 





Bunting Rectangular Magnetic Chuck Standard Pitch 350 x 150 mm (Ref: MC350150SA)

Bunting Rectangular Magnetic Chuck Standard Pitch 350 x 150 mm

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

278.97 334.76


Quantity: 





Bunting Rectangular Magnetic Chuck Standard Pitch 450 x 150 mm (Ref: MC450150SA)

Bunting Rectangular Magnetic Chuck Standard Pitch 450 x 150 mm

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

360.91 433.09


Quantity: 





Bunting Rectangular Magnetic Chuck Standard Pitch 600 x 300 mm (Ref: MC600300SA)

Bunting Rectangular Magnetic Chuck Standard Pitch 600 x 300 mm

Pitch A - Standard Pitch Suitable for workpieces above 3 mm thickness
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

1,100.00 1,320.00


Quantity: 





Bunting Rectangular Magnetic Chuck Fine Pitch 175 x 100 mm (Ref: MC175100SAA)

Bunting Rectangular Magnetic Chuck Fine Pitch 175 x 100 mm

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

142.41 170.89


Quantity: 





Bunting Rectangular Magnetic Chuck Fine Pitch 250 x 125 mm (Ref: MC250125SAA)

Bunting Rectangular Magnetic Chuck Fine Pitch 250 x 125 mm

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

183.38 220.06


Quantity: 





Bunting Rectangular Magnetic Chuck Fine Pitch 300 x 150 mm (Ref: MC300150SAA)

Bunting Rectangular Magnetic Chuck Fine Pitch 300 x 150 mm

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

249.71 299.65


Quantity: 





Bunting Rectangular Magnetic Chuck Fine Pitch 350 x 150 mm (Ref: MC350150SAA)

Bunting Rectangular Magnetic Chuck Fine Pitch 350 x 150 mm

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

288.73 346.48


Quantity: 





Bunting Rectangular Magnetic Chuck Fine Pitch 450 x 150 mm (Ref: MC450150SAA)

Bunting Rectangular Magnetic Chuck Fine Pitch 450 x 150 mm

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

380.41 456.49


Quantity: 





Bunting Rectangular Magnetic Chuck Fine Pitch 600 x 300 mm (Ref: MC600300SAA)

Bunting Rectangular Magnetic Chuck Fine Pitch 600 x 300 mm

Pitch AA - Fine Pole Pitch Suitable for workpieces less than 3 mm thick
Rated Pull Force on 100N/cm2

CLICK THE IMAGE FOR A LARGER PICTURE

About Bunting E-Magnetic Chucks


Magnetic Workholding from E-Magnets
E-Magnets Higher Performance range of Magnetic Grinding and Magnetic Milling Chucks has been engineered to produce a new class leading holding force, giving even higher rates of productivity gains thanstandard Magnetic Chucks.

Available in a wide range of sizes, with bothStandard and Fine Pole Pitches designed to hold different product thicknesses, with an industry leading 100 n/cm2 of holding force our Magnetic Chucks will consistently and safely clamp your product.

Our magnetic chucks are designed to save you money, from purchasing the magnetic chuckthrough to saving operation times when grinding, milling or when used for other work holding orinspection clamping operations.

The advantages of an E-Magnets Magnetic Chuck over standard holding methods are: the minimal clamping time needed between piece swap over, faster feed rates coupled with higher material removal than standard magnetic chucks, excellent access allowing up to 5 face machining, and the permanent magnetic design mean that the part is always clamped even in the event of a power failure.

n 20% More holding force than the industry standard
n High Performance Rare Earth Neodymium
Magnet Technology
n Consistent holding
n Increased Output
n Suitable for Milling, Turning and Grinding
n High Precision, so also suitable for inspection work holding

Our high precision, parallel ground faces are extremely durable, requiring minimal maintenance and are designed to complement the rugged construction and exceptional Rare Earth Neodymium Magnet technology.
Both Rectangular and Circular options benefit from our class leading magnetic holding technology and failsafe permanent magnet design and are suitable for holding all Ferrous Metals

1,113.96 1,336.75


Quantity: 








Magnetic Chucks- Rectangular - Buy online at Chronos (call us or click live chat for help with Magnetic Chucks- Rectangular)
Visit our engineering blog