Lathe Taper Tooling



New Sliding Tailstock Dieholder Kit 2 MT  (Ref: 140496)

New Sliding Tailstock Dieholder Kit 2 MT

This latest set includes a 2 Morse Taper Shank AND also a Parallel one !
It will hold 13/16 - 1" - 1 5/16 & 1 1/2 " Dies


24.99 29.99


Quantity: 

People who bought New Sliding Tailstock Dieholder Kit 2 MT also bought::

1. Set of Tube Bending Springs
2. Eze-Lap Fine Grit (600) - Red Handle
3. Edge Finder 4mm SORRY OUT OF STOCK





New Sliding Tailstock Dieholder Kit 3 MT  (Ref: 140498)

New Sliding Tailstock Dieholder Kit 3 MT

This latest set includes a 3 Morse Taper Shank AND also a Parallel one !
It will hold 13/16 - 1" - 1 5/16 & 1 1/2 " Dies

30.01 36.01


Quantity: 

People who bought New Sliding Tailstock Dieholder Kit 3 MT also bought::

1. 4 MT TEST BAR
2. 1 1/2 " Machine Dieholder
3. Morse Taper Sleeves- MT2-MT3 Tang End





2 Morse Taper Quad Head Tailstock Die Holder SORRY OUT OF STOCK (Ref: TSD2MT)

2 Morse Taper Quad Head Tailstock Die Holder   SORRY OUT OF STOCK

These quad die holders take 13/16",1" & 1 5/16" & 1 1/2" OD dies. Complete with Allen keys etc


24.00 28.80



People who bought 2 Morse Taper Quad Head Tailstock Die Holder SORRY OUT OF STOCK also bought::

1. M14 x 1 CARBON PLUG TAP
2. Soba Precision Live Centre 2 MT
3. Tapping Guide





3 Morse Taper Quad Head Tailstock Die Holder  (Ref: TSD3MT)

3 Morse Taper Quad Head Tailstock Die Holder

These quad die holders take 13/16",1" & 1 5/16" & 1 1/2" OD dies. Complete with Allen keys etc

25.00 30.00


Quantity: 

People who bought 3 Morse Taper Quad Head Tailstock Die Holder also bought::

1. 2 Morse Taper Quad Head Tailstock Die Holder SORRY OUT OF STOCK
2. M8 x 1.25 CARBON PLUG TAP
3. M8 X 1.25 CARBON DIE





Solid Morse Taper Socket 2MT x 25mm Diameter  (Ref: 200246)

Solid Morse Taper Socket 2MT x 25mm  Diameter

These precision sockets have a morse taper inside and a parallel outer body.


7.10 8.52


Quantity: 

People who bought Solid Morse Taper Socket 2MT x 25mm Diameter also bought::

1. Woodworking Outside Calipers
2. SOFT BLANK END ARBOR 2 MT TAPPED END
3. 1" Bent Lathe Dog





Solid Morse Taper Socket 2MT x 1 1/2 " Diameter  (Ref: 200247)

Solid Morse Taper Socket 2MT x 1 1/2

These precision sockets have a morse taper inside and a parallel outer body.


11.00 13.20


Quantity: 

People who bought Solid Morse Taper Socket 2MT x 1 1/2 " Diameter also bought::

1. 2 MT DEAD CENTRE for Myford Lathes
2. SCT Tailstock Live Cup Centre MT2 Shank 33mm Dia Head
3. 1.5 - 13 mm Quality Drill Chuck on a 2 MT





1 MT DEAD CENTRE for Myford Lathes (Ref: DC1)

1 MT DEAD CENTRE for Myford Lathes

1 MORSE TAPER DEAD CENTRE

4.50 5.40


Quantity: 

People who bought 1 MT DEAD CENTRE for Myford Lathes also bought::

1. TYPE 6 HSS BORING TOOL 8 MM SQ
2. 10BA CARBON DIE
3. 125 mm 4 Jaw Self centering Chuck threaded 1 1/8 x 12 tpi to suit Myford





2 MT DEAD CENTRE for Myford Lathes  (Ref: DC2)

2 MT DEAD CENTRE for Myford Lathes

2 MORSE TAPER DEAD CENTRE

5.50 6.60


Quantity: 

People who bought 2 MT DEAD CENTRE for Myford Lathes also bought::

1. 2 MT HALF CENTRE CENTRE for Myford Lathes
2. 2 MT TEST BAR TSB2
3. Standard Length Beargrip Allen Keys Imperial





3 MT DEAD CENTRE  (Ref: DC3)

3 MT DEAD CENTRE

3 MORSE TAPER DEAD CENTRE

3.40 4.08


Quantity: 

People who bought 3 MT DEAD CENTRE also bought::

1. Soba Precision Live Centre 3 MT
2. 7/16 BRASS SQUARE
3. 1" BRASS ROUND





1 MT HALF CENTRE CENTRE for Myford Lathes (Ref: HC112)

1 MT HALF CENTRE CENTRE for Myford Lathes

1 MORSE TAPER HALF CENTRE

4.60 5.52


Quantity: 

People who bought 1 MT HALF CENTRE CENTRE for Myford Lathes also bought::

1. 1/2" Straight Lathe Dog
2. SPARE HOLDER for Myford Lathes - SOBA BRAND
3. 2 MT DEAD CENTRE for Myford Lathes





2 MT HALF CENTRE CENTRE for Myford Lathes  (Ref: HC212)

2 MT HALF CENTRE CENTRE for Myford Lathes

2 MORSE TAPER HALF CENTRE

4.60 5.52


Quantity: 

People who bought 2 MT HALF CENTRE CENTRE for Myford Lathes also bought::

1. 2 MT DEAD CENTRE for Myford Lathes
2. Set of 5 Spare Inserts for CG213 5/16 Lathe tool set
3. 1 1/8 X 12 TPI SECOND TAP - MYFORD THREAD





3 MT HALF CENTRE CENTRE for Myford Lathes (Ref: HC312)

3 MT HALF CENTRE CENTRE for Myford Lathes

3 MORSE TAPER HALF CENTRE

4.95 5.94


Quantity: 

People who bought 3 MT HALF CENTRE CENTRE for Myford Lathes also bought::

1. Soba Precision Live Centre 3 MT
2. Spare Boring Holder for Boxford T1 Compatible
3. Set of 5 HSS Centre Drills in Wooden Box





Soba Precision Live Centre 2 MT  (Ref: 201507)

Soba Precision Live Centre 2 MT

Precison Live Centre

This precision live centre is manufactured from high quality carbon steel to the highest standards , using precision bearings , seals and grease .
The revolving centre , body & shank are hardened 30-40 HRC . Points are hardened up to 60 HRC . Suitable for medium & light duty applications . Bearings are protected by a neoprene seal for longer life .

SPECIFICATION

Overall Length - 151 mm
Head Dia - 36 x 39 mm
Point Length - 30 mm
Max RPM - 3000
Max Load - 100 KG




18.93 22.72


Quantity: 

People who bought Soba Precision Live Centre 2 MT also bought::

1. Stuarts Marking Paste (Tube)
2. Woodworking Outside Calipers
3. New Sliding Tailstock Dieholder Kit 2 MT





Soba Precision Live Centre 3 MT (Ref: 201510)

Soba Precision Live Centre 3 MT

Precison Live Centre

This precision live centre is manufactured from high quality carbon steel to the highest standards , using precision bearings , seals and grease .
The revolving centre , body & shank are hardened 30-40 HRC . Points are hardened up to 60 HRC . Suitable for medium & light duty applications . Bearings are protected by a neoprene seal for longer life .

SPECIFICATION

Overall Length - 174 mm
Head Dia - 48 x 59 mm
Point Length - 34 mm
Max RPM - 2500
Max Load - 250 KG




15.95 19.14


Quantity: 

People who bought Soba Precision Live Centre 3 MT also bought::

1. 3 MT DEAD CENTRE
2. 7/32 MILD STEEL ROUND
3. 7/16 BRASS SQUARE





Soba Precision Live Centre 4 MT  (Ref: 201517)

Soba Precision Live Centre 4 MT

Precison Live Centre

This precision live centre is manufactured from high quality carbon steel to the highest standards , using precision bearings , seals and grease .
The revolving centre , body & shank are hardened 30-40 HRC . Points are hardened up to 60 HRC . Suitable for medium & light duty applications . Bearings are protected by a neoprene seal for longer life .

SPECIFICATION

Overall Length - 225 mm
Head Dia - 55 x 65 mm
Point Length - 40 mm
Max RPM - 2500
Max Load - 250 KG




29.11 34.93


Quantity: 

People who bought Soba Precision Live Centre 4 MT also bought::

1. 52 Pc Clamping Kit 14mm Slot 12 mm Stud
2. HSS ENDMILL 16 MM DIAMETER
3. HSS ENDMILL 12 MM DIAMETER





Soba Precision Live Centre 5 MT  (Ref: 201522)

Soba Precision Live Centre 5 MT

Precison Live Centre

This precision live centre is manufactured from high quality carbon steel to the highest standards , using precision bearings , seals and grease .
The revolving centre , body & shank are hardened 30-40 HRC . Points are hardened up to 60 HRC . Suitable for medium & light duty applications . Bearings are protected by a neoprene seal for longer life .

SPECIFICATION

Overall Length - 255 mm
Head Dia - 60 x 65 mm
Point Length - 40 mm
Max RPM - 2500
Max Load - 250 KG




52.24 62.69


Quantity: 





1MT LIVE CENTRE LC1  (Ref: LC1)

1MT LIVE CENTRE LC1

Double bearing mechanism with hardened centre shaft and special steel housing. Run out within 0.002"
REMEMBER OUR PRICE INCLUDES VAT & CARRIAGE UK MAINLAND!!

CLICK THE IMAGE FOR THE LARGER PICTURE

13.09 15.71


Quantity: 

People who bought 1MT LIVE CENTRE LC1 also bought::

1. Glanze Clamp Type Indexable Parting Tool 8 mm SORRY OUT OF STOCK
2. Set of 8 HSS Lathe Tools 6mm Square Shanks SORRY OUT OF STOCK




Customer Reviews

  Excellent value  Good value, accurate lice centre. Super service from Chronos as ususl.   (14/06/2012) Roy - Wimborne




2MT LIVE CENTRE LC2  (Ref: LC2)

2MT LIVE CENTRE LC2

Double bearing mechanism with hardened centre shaft and special steel housing. Run out within 0.002"
REMEMBER OUR PRICE INCLUDES VAT & CARRIAGE UK MAINLAND!!


CLICK THE IMAGE FOR THE LARGER PICTURE

17.00 20.40


Quantity: 

People who bought 2MT LIVE CENTRE LC2 also bought::

1. Spare Insert
2. Soba Precision Live Centre 2 MT
3. 2 MT TEST BAR TSB2





3MT LIVE CENTRE-LC3  (Ref: LC3)

3MT LIVE CENTRE-LC3

Double bearing mechanism with hardened centre shaft and special steel housing. Run out within 0.002"
REMEMBER OUR PRICE INCLUDES VAT & CARRIAGE UK MAINLAND!!

CLICK THE IMAGE FOR THE BIGGER PICTURE


23.37 28.04


Quantity: 

People who bought 3MT LIVE CENTRE-LC3 also bought::

1. SET OF 10 CCMT CARBIDE INSERTS TiN COATED (GOLD)
2. SET OF 10 CCGT CARBIDE INSERTS FOR GLANZE LATHE TOOLS- A SUPERIOR FINISH ON ALUMINIUM ETC !
3. Set of 7 SCT Indexable Lathe Tools 16 mm Shank





Soba 2 MT Live Centre with 3 Jaw Chuck (Ref: 154032)

Soba 2 MT Live Centre with 3 Jaw Chuck

This great new tool is a really useful addition for any one with a lathe that has a 2 MT tailstock . It is a live centre with a difference.
At the business end is a 60 mm diameter slim body 3 jaw self centering chuck with reversible jaws.

Perfect for workholding where a conventional pointed live centre will not do the job


70.50 84.60


Quantity: 

People who bought Soba 2 MT Live Centre with 3 Jaw Chuck also bought::

1. Morse Taper Extension Socket 3-2 MT
2. SOFT BLANK END ARBOR 1MT TAPPED END





Soba MT2 Revolving Tube Centre - Bull Nose Pipe Centre 2 1/2" SORRY OUT OF STOCK (Ref: 201905)

Soba MT2 Revolving Tube Centre - Bull Nose Pipe Centre 2 1/2

Useful for supporting Hollow Workpieces
MT2
2 1/2 2 Dia Revolving Head

28.00 33.60



People who bought Soba MT2 Revolving Tube Centre - Bull Nose Pipe Centre 2 1/2" SORRY OUT OF STOCK also bought::

1. SCT 7pc Set of Drive Centres in a Wooden Box M33 x 3.5 mm Thread
2. Glanze 4 PC Lathe Starter Set With 10 MM Shank For Myford Size QC Toolposts
3. New Glanze Set of Grooving , Turning & Boring Tools 12 mm Shank





Soba Mini Live Centre with 0 Morse Taper Shank  (Ref: 201640)

Soba Mini Live Centre with 0 Morse Taper Shank

Small Precision live centre with a shank to suit your 0 MT Lathe. Body diameter is only 23 mm. A nice precision accessory for your lathe

12.46 14.95


Quantity: 

People who bought Soba Mini Live Centre with 0 Morse Taper Shank also bought::

1. Transfer Punch 5-20mm SORRY OUT OF STOCK
2. Zeuss Precision Data Charts
3. Morse Taper Extension Socket 1-2 MT





Soba Mini Live Centre with 1 MT Shank SORRY OUT OF STOCK (Ref: 201641)

Soba Mini Live Centre with 1 MT Shank   SORRY OUT OF STOCK

Small Precision live centre with a shank to suit your 1 Morse Taper Lathe. Body diameter is only 23 mm. A nice precision accessory for your lathe

12.46 14.95



People who bought Soba Mini Live Centre with 1 MT Shank SORRY OUT OF STOCK also bought::

1. Morse Taper Sleeves- MT2-MT3 Open Ended
2. Round Toolsteel - HSS round Tool steel - 3/16 dia x 2" long
3. 6 PC Morticing Drill Set Metric Right Hand





New Small Body 2MT Live Centre  (Ref: LCRT)

New Small Body 2MT Live Centre

Double bearing mechanism with hardened centre shaft and special steel housing. Run out within 0.002". New version with smaller body - 32mm dia

22.58 27.10


Quantity: 

People who bought New Small Body 2MT Live Centre also bought::

1. NEW Z TYPE EDGE FINDER 4 mm
2. 2MT - B16 Tang End Drill Chuck Arbor
3. Digital Angle Finder Protractor Bevel Level Box





1MT Interchangeable Point Live Centre  (Ref: 201600)

1MT Interchangeable Point Live Centre

These superbly made 1 MT Live Centre Sets come complete boxed with 7 interchangeable points. The body is made of SCM4 special toolsteel hardened & ground suitable for heavy duty work.

43.00 51.60


Quantity: 





Mini Combination Lathe Test Bar MT0 / MT1 (Ref: TSB01)

Mini Combination Lathe Test Bar MT0 / MT1

NEW DOUBLE ENDED MINI LATHE TEST BAR

2. The materal used to manufacture is High GradeAlloy Steel

3. Hardness is HRC 52-55

4. Completely hardened and ground with under 2 microns accuracy.

5 . Overall Length 100 mm



8.00 9.60


Quantity: 

People who bought Mini Combination Lathe Test Bar MT0 / MT1 also bought::

1. Mini Traditional HSS Internal Threading Tool 1/4" Square 60' Metric





Combination Lathe Test Bar MT2 / MT3 (Ref: TSB23)

 Combination Lathe Test Bar MT2 / MT3

NEW DOUBLE ENDED LATHE TEST BAR

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE

2. The materal used to manufacture is High GradeAlloy Steel

3. Hardness is HRC 52-55

4. Completely hardened and ground with under 2 microns accuracy.

5 . Overall Length 450 mm Parallel Section - 300 mm




26.84 32.21


Quantity: 

People who bought Combination Lathe Test Bar MT2 / MT3 also bought::

1. Set of 3 Assorted 185mm Carbide Tipped Blades
2. SET OF 10 DCGT CARBIDE INSERTS FOR GLANZE ETC DCMT LATHE TOOLS FOR A SUPERIOR FINISH ON ALUMINIUM !
3. Set of Imperial Extra Long Series HSS Drills





1 MT TEST BAR TSB1  (Ref: GX11)

1 MT TEST BAR TSB1

Hardened and precision ground parallel to within 0.0002". Centres protected against damage essential for testing lathes and readjusting tailstocks etc. Centered both ends.
click the image for a larger picture

25.69 30.83


Quantity: 





2 MT TEST BAR TSB2  (Ref: 202605)

2 MT TEST BAR TSB2

Hardened and precision ground parallel to within 0.0002". Centres protected against damage essential for testing lathes and readjusting tailstocks etc. Centered both ends. Overall Length 180 mm - parallel part is 110 mm Long
click the image for a larger picture

31.50 37.80


Quantity: 

People who bought 2 MT TEST BAR TSB2 also bought::

1. 2 MT DEAD CENTRE for Myford Lathes
2. SOFT BLANK END ARBOR 2 MT TANG END
3. 1 1/8 X 12 TPI SET OF THREE TAPS - MYFORD THREAD





3 MT TEST BAR TBS3  (Ref: 202610)

3 MT TEST BAR TBS3

Hardened and precision ground parallel to within 0.0002". Centres protected against damage essential for testing lathes and readjusting tailstocks etc. Centered both ends.
Overall length is 220 mm - The parallel part is 120 mm


click the image for a larger picture

39.00 46.80


Quantity: 

People who bought 3 MT TEST BAR TBS3 also bought::

1. HSS DRILL SET 50 pc 1-6mm x 0.1 mm
2. Spanner for ER32 Collet Chucks
3. Morse Taper Sleeves- MT3-MT4 Open Ended





4 MT TEST BAR  (Ref: TSB4)

4 MT TEST BAR

Hardened and precision ground parallel to within 0.0002". Centres protected against damage essential for testing lathes and readjusting tailstocks etc. Centered both ends.
click the image for a larger picture

Overall Length 270 mm

38.00 45.60


Quantity: 

People who bought 4 MT TEST BAR also bought::

1. Morse Taper Sleeves- MT3-MT4 Tang End
2. 3/4" Bent Lathe Dog
3. 1" Bent Lathe Dog





5 MT TEST BAR  (Ref: TSB5)

5 MT TEST BAR

Hardened and precision ground parallel to within 0.0002". Centres protected against damage essential for testing lathes and readjusting tailstocks etc. Centered both ends.
click the image for a larger picture

60.00 72.00


Quantity: 

People who bought 5 MT TEST BAR also bought::

1. Wiggler & Centre Finder Set
2. ER32 COLLET 15-16 MM SORRY OUT OF STOCK
3. ER32 COLLET 10-11 MM SORRY OUT OF STOCK





Open Ended Adaptor 2-3 MT with ejector ring  (Ref: OPS1)

Open Ended Adaptor 2-3 MT with ejector ring

This adaptor enables 2MT equipment to be used on machines which normally require 3MT tooling.
Open ended for drawbar use. Includes nut for easy ejection.

11.00 13.20


Quantity: 

People who bought Open Ended Adaptor 2-3 MT with ejector ring also bought::

1. Set of Three Sleeves
2. Wiggler & Centre Finder Set
3. Morse Taper Sleeves- MT2-MT3 Tang End





Morse Taper Sleeves- MT1-MT2 Tang End  (Ref: SV12)

Morse Taper Sleeves- MT1-MT2 Tang End

Hardened and ground. Used to convert spindles to smaller tapers and extend the spindles of drill presses etc.

4.74 5.69


Quantity: 

People who bought Morse Taper Sleeves- MT1-MT2 Tang End also bought::

1. Morse Taper Sleeves- MT2-MT3 Tang End
2. Morse Taper Sleeves- MT1-MT3 Tang End
3. Combined Screw Pitch Gauge Metric / Whitworth





Morse Taper Sleeves- MT1-MT3 Tang End  (Ref: SV13)

Morse Taper Sleeves- MT1-MT3 Tang End

Hardened and ground. Used to convert spindles to smaller tapers and extend the spindles of drill presses etc.

4.50 5.40


Quantity: 

People who bought Morse Taper Sleeves- MT1-MT3 Tang End also bought::

1. Morse Taper Sleeves- MT2-MT3 Tang End
2. Morse Taper Sleeves- MT1-MT2 Tang End
3. Set of 3 Swiss Style Tap Wrenches





Morse Taper Sleeves- MT1-MT4 Tang End (Ref: SV14)

Morse Taper Sleeves- MT1-MT4 Tang End

Hardened and ground. Used to convert spindles to smaller tapers and extend the spindles of drill presses etc.

7.61 9.13


Quantity: 

People who bought Morse Taper Sleeves- MT1-MT4 Tang End also bought::

1. SET OF THREE M4 X 0.7 HSS TAPS - TAPER SECOND & PLUG
2. Digital Angle Finder Protractor Bevel Level Box
3. Medium Clamp Type Knurling Tool SORRY OUT OF STOCK





Morse Taper Sleeves- MT2-MT3 Tang End  (Ref: SV23)

Morse Taper Sleeves- MT2-MT3 Tang End

Hardened and ground. Used to convert spindles to smaller tapers and extend the spindles of drill presses etc.

4.50 5.40


Quantity: 

People who bought Morse Taper Sleeves- MT2-MT3 Tang End also bought::

1. Morse Taper Sleeves- MT1-MT2 Tang End
2. Morse Taper Sleeves- MT1-MT3 Tang End
3. Combined Screw Pitch Gauge Metric / Whitworth





Morse Taper Sleeves- MT3-MT4 Tang End  (Ref: SV34)

Morse Taper Sleeves- MT3-MT4 Tang End

Hardened and ground. Used to convert spindles to smaller tapers and extend the spindles of drill presses etc.

8.15 9.78


Quantity: 

People who bought Morse Taper Sleeves- MT3-MT4 Tang End also bought::

1. Set of Three Sleeves
2. Morse Taper Sleeves- MT1-MT4 Tang End
3. Digital Angle Finder Protractor Bevel Level Box





Set of Three Sleeves  (Ref: SVSET)

Set of Three Sleeves

SET OF THREE MORSE TAPER SLEEVES

1MT INSIDE AND 3MT OUTSIDE
1MT INSIDE AND 2MT OUTSIDE
2MT INSIDE AND 3MT OUTSIDE

HARDENED AND GROUND


10.96 13.15


Quantity: 

People who bought Set of Three Sleeves also bought::

1. Morse Taper Sleeves- MT3-MT4 Tang End
2. Morse Taper Sleeves- MT2-MT3 Tang End
3. Open Ended Adaptor 2-3 MT with ejector ring





Morse Taper Sleeves- MT1-MT2 Open Ended  (Ref: SV12E)

Morse Taper Sleeves- MT1-MT2 Open  Ended

Hardened and ground. Used to convert spindles to smaller tapers and extend the spindles of drill presses etc.

4.96 5.95


Quantity: 

People who bought Morse Taper Sleeves- MT1-MT2 Open Ended also bought::

1. Morse Taper Sleeves- MT2-MT3 Open Ended
2. 1 Litre of Multispec Slideway Oil
3. 1 Litre General Purpose Lubricating Oil





Morse Taper Sleeves- MT1-MT3 Open Ended (Ref: SV13E)

Morse Taper Sleeves- MT1-MT3 Open  Ended

Hardened and ground. Used to convert spindles to smaller tapers and extend the spindles of drill presses etc.

4.96 5.95


Quantity: 

People who bought Morse Taper Sleeves- MT1-MT3 Open Ended also bought::

1. New Spindle Type Die Holder 13/16" 40 % OFF
2. SOFT BLANK END ARBOR 3MT TANG END
3. SOFT BLANK END ARBOR 3 MT TAPPED END





Morse Taper Sleeves- MT2-MT3 Open Ended  (Ref: SV23E)

Morse Taper Sleeves- MT2-MT3 Open  Ended

Hardened and ground. Used to convert spindles to smaller tapers and extend the spindles of drill presses etc.


3.75 4.50


Quantity: 

People who bought Morse Taper Sleeves- MT2-MT3 Open Ended also bought::

1. Morse Taper Extension Socket 3-2 MT
2. SOBA CLAMPING KIT 36pcs (M-8)
3. New Sliding Tailstock Dieholder Kit 2 MT





Morse Taper Sleeves- MT3-MT4 Open Ended  (Ref: SV34E)

Morse Taper Sleeves- MT3-MT4 Open  Ended

Hardened and ground. Used to convert spindles to smaller tapers and extend the spindles of drill presses etc.

10.88 13.06


Quantity: 

People who bought Morse Taper Sleeves- MT3-MT4 Open Ended also bought::

1. Spare Insert for AAAP & BAAP Indexable Endmills & Face Mill System
2. Soba MT2 Revolving Tube Centre - Bull Nose Pipe Centre 2 1/2" SORRY OUT OF STOCK
3. 3 MT TEST BAR TBS3





Open Ended Adaptor 2-3 MT with ejector ring  (Ref: OPS1..)

Open Ended Adaptor 2-3 MT with ejector ring

This adaptor enables 2MT equipment to be used on machines which normally require 3MT tooling.
Open ended for drawbar use. Includes nut for easy ejection.


11.00 13.20


Quantity: 





Morse Taper Extension Socket 1-2 MT (Ref: EXT21)

Morse Taper Extension Socket 1-2 MT

1MT outside 2MT Inside


9.00 10.80


Quantity: 

People who bought Morse Taper Extension Socket 1-2 MT also bought::

1. Zeuss Precision Data Charts
2. 100 mm Diameter Unmachined Backplate
3. Quality Drill Chuck 0.5 - 6 mm with 1MT Arbor





Morse Taper Extension Socket 2-2 MT  (Ref: EXT22)

Morse Taper Extension Socket 2-2 MT

2MT outside 2MT Inside

9.62 11.54


Quantity: 

People who bought Morse Taper Extension Socket 2-2 MT also bought::

1. Set of Three Sleeves
2. 3 MT HALF CENTRE CENTRE for Myford Lathes
3. Drill Chuck Key 8mm Pin 11 Teeth





Morse Taper Extension Socket 3-2 MT  (Ref: EXT32)

Morse Taper Extension Socket 3-2 MT

2MT outside 3MT Inside

13.68 16.42


Quantity: 

People who bought Morse Taper Extension Socket 3-2 MT also bought::

1. M6 X 1 HSS PLUG TAP
2. Solid Morse Taper Socket 2MT x 25mm Diameter
3. 3MT - JT6 Tang End Drill Chuck Arbor





Morse Taper Extension Socket 3-2 MT (Ref: EXT23)

Morse Taper Extension Socket 3-2 MT

3MT outside 2MT Inside

11.00 13.20


Quantity: 

People who bought Morse Taper Extension Socket 3-2 MT also bought::

1. Morse Taper Sleeves- MT2-MT3 Open Ended
2. ER32 COLLET 15-16 MM SORRY OUT OF STOCK
3. Set of Tube Bending Springs





Morse Taper Extension Socket 3-3 MT  (Ref: EXT33)

Morse Taper Extension Socket 3-3 MT

3MT outside 3MT Inside

15.12 18.14


Quantity: 

People who bought Morse Taper Extension Socket 3-3 MT also bought::

1. Morse Taper Sleeves- MT2-MT3 Open Ended
2. Morse Taper Sleeves- MT2-MT3 Tang End
3. SCT 6" Angle Plates Webbed End





SOFT BLANK END ARBOR 1MT TANG END  (Ref: BEA1T)

SOFT BLANK END ARBOR 1MT TANG END

These extremely useful arbors have ground taper shanks with soft ends which are easily machined for the user's own purpose. Ideal for mounting cutters, making fly cutters etc. Blank end is 7/8"dia and 1" long.

4.50 5.40


Quantity: 

People who bought SOFT BLANK END ARBOR 1MT TANG END also bought::

1. Morse Taper Sleeves- MT1-MT3 Open Ended
2. Morse Taper Sleeves- MT1-MT2 Open Ended
3. 1 Litre of Multispec Slideway Oil





SOFT BLANK END ARBOR 2 MT TANG END (Ref: BEA2T)

SOFT BLANK END ARBOR 2 MT TANG END

These extremely useful arbors have ground taper shanks with soft ends which are easily machined for the user's own purpose. Ideal for mounting cutters, making fly cutters etc. Blank end is 7/8"dia and 1" long.

4.50 5.40


Quantity: 

People who bought SOFT BLANK END ARBOR 2 MT TANG END also bought::

1. Soba 4" Rotary Table HV4 Type
2. Milling Machine Head Setting Tool Imperial
3. Set of Five Soft Blank End Arbor 2MT





SOFT BLANK END ARBOR 3MT TANG END  (Ref: BEA3T)

SOFT BLANK END ARBOR 3MT TANG END

These extremely useful arbors have ground taper shanks with soft ends which are easily machined for the user's own purpose. Ideal for mounting cutters, making fly cutters etc. Blank end is 7/8"dia and 1" long.

4.74 5.69


Quantity: 

People who bought SOFT BLANK END ARBOR 3MT TANG END also bought::

1. Morse Taper Sleeves- MT2-MT3 Tang End
2. Morse Taper Sleeves- MT1-MT3 Open Ended
3. New Spindle Type Die Holder 13/16" 40 % OFF





SOFT BLANK END ARBOR 1MT TAPPED END  (Ref: BEA1S)

SOFT BLANK END ARBOR 1MT TAPPED END

These extremely useful arbors have ground taper shanks with soft ends which are easily machined for the user's own purpose. Ideal for mounting cutters, making fly cutters etc. Blank end is 7/8"dia and 1" long. TAPPED 1/4 BSW FOR A DRAWBAR


4.90 5.88


Quantity: 

People who bought SOFT BLANK END ARBOR 1MT TAPPED END also bought::

1. Morse Taper Sleeves- MT2-MT3 Open Ended
2. Morse Taper Sleeves- MT1-MT3 Open Ended
3. Morse Taper Sleeves- MT1-MT2 Open Ended





SOFT BLANK END ARBOR 2 MT TAPPED END (Ref: BEA2S)

SOFT BLANK END ARBOR 2 MT TAPPED END

These extremely useful arbors have ground taper shanks with soft ends which are easily machined for the user's own purpose. Ideal for mounting cutters, making fly cutters etc. Blank end is 7/8"dia and 1" long. TAPPED 3/8 BSW FOR A DRAWBAR

4.95 5.94


Quantity: 

People who bought SOFT BLANK END ARBOR 2 MT TAPPED END also bought::

1. Solid Morse Taper Socket 2MT x 25mm Diameter
2. Spare Blade for Glanze 12 mm Shank Clamp Type Parting Tools
3. Self Centering Milling Vice Suitable for Myford Type Milling Slides for Myford Lathes SORRY OUT OF STOCK





Set of Five Soft Blank End Arbor 2MT  (Ref: GX53)

Set of Five Soft Blank End Arbor 2MT

Set of Five Soft Arbor for machining to your own requirements. Tapped 3/8 BSW for a draw bar. Blank End is 1" Dia and 1" Long


21.00 25.20


Quantity: 

People who bought Set of Five Soft Blank End Arbor 2MT also bought::

1. Set of 7 Soba Precision Parallels 150mm Long
2. Double Ended Scriber
3. SPARE DCMT INSERT TiN COATED (GOLD)





SOFT BLANK END ARBOR 3 MT TAPPED END  (Ref: BEA3S)

SOFT BLANK END ARBOR 3 MT TAPPED END

These extremely useful arbors have ground taper shanks with soft ends which are easily machined for the user's own purpose. Ideal for mounting cutters, making fly cutters etc. Blank end is 7/8"dia and 1" long. TAPPED 3/8 BSW FOR A DRAWBAR

5.00 6.00


Quantity: 

People who bought SOFT BLANK END ARBOR 3 MT TAPPED END also bought::

1. HSS DRILL BIT 0.8 MM
2. 4 " Backplate Threaded to Suit Myford
3. R8 Soft Blank End Arbor





Set of Five Soft Blank End Arbor 3MT (Ref: GX55)

Set of Five Soft Blank End Arbor 3MT

Set of Five Soft Arbor for machining to your own requirements. Tapped 3/8 BSW for a draw bar. Blank End is 7/8" Dia and 1" Long


19.95 23.94


Quantity: 

People who bought Set of Five Soft Blank End Arbor 3MT also bought::

1. Morse Taper Sleeves- MT2-MT3 Open Ended
2. Morse Taper Sleeves- MT2-MT3 Tang End
3. Stuarts Marking Paste (Tube)





R8 Soft Blank End Arbor (Ref: 200925)

R8 Soft Blank End Arbor

This is left soft for you to machine to your own requirement. Standard R8 Shank- tapped 7/16 UNF. Blank end is 1 1/8 " Diameter and 1" Long .


7.60 9.12


Quantity: 

People who bought R8 Soft Blank End Arbor also bought::

1. Set of Solid Carbide Endmills SORRY OUT OF STOCK
2. Set of 4 Solid Cobalt Ball Nosed Endmills Metric
3. R8 Arbor for 16mm Bore Cutters








Lathe Taper Tooling - Buy online at Chronos (call us or click live chat for help with Lathe Taper Tooling)
Visit our engineering blog