Clarke CL500M Lathe & Accessories



Clarke CL500M Metal Lathe With Mill Drill  (Ref: 7610300)

Clarke CL500M Metal Lathe With Mill Drill

This superbly engineered Lathe can be used for turning, milling and drilling.

It’s solid construction with a cast iron bed and a multitude of features make it outstanding value for money.

Lathe specification includes- Forward/reverse operation - 3 Jaw chuck - MT3 & MT4 centres - Spanners and wrench - Gear sets for screw cutting - Compound slide with 4 way tool post - Machine Vice. Distance between centres 430mm. Swing over bed 305mm. Swing across slide 172mm diameter. Spindle bore 26mm dia. Spindle taper No.4MT. Tail stock taper No.3MT. 6 Spindle speeds 170-1630rpm. 14 Metric screw cutting pitches 0.5 to 5.3mm. 20 Imperial screw cutting pitches 11 to 40 tpi. Power feed for screw cutting - - Powerful 3/4 hp 230v motor - No volt release switch. Chuck guards on lathe and mill/drill.

Mill/Drill Specifications- Quick action clutch for independent lathe/mill drill operation- Fine feed adjustment on milling - Mill head rotates 360 deg - Capstan to raise/lower head - Mill/drill head includes 13mm drill chuckDrill capacity - 13mm Spindle column 175mm. Spindle nose- table - 150-320mm. Spindle bed - 212-382mm. Spindle stroke 92mm. Spindle Taper 3MT (with drawbar). Spindle speeds 12 (130-1660 rpm) Table 200x 150mm. T slots 12mm.

Picture shows the machine mounted on the OPTIONAL floor stand/suds tray

0.75hp electric motor 230v, 1ph with on/off switch featuring prominent hit stop button for operator safety.
Fully rotating, capstan operated 12 speed mill drill head with 13mm drill chuck & fine feed adjustment.
6 speed forward/reverse lathe with 3 jaw chuck, compound slide, 4 way tool post & MT3/MT4 centres.
Power feed screw cutting with gear sets included for metric 14 (0.5-3.0mm pitch) & imperial 20 (11-40 TPI).
Quick acting clutch for independent mill drill / lathe operation.
Picture shows stand with suds tray - this is available as an optional extra.
Dimensions (LWH) 1100x600x880mm. Weight 164kg

CUSTOMERS IN SCOTLAND PLEASE RING 01582 471900 FOR CARRIAGE QUOTE. WE ARE UNABLE TO OFFER FREE DELIVERY TO SCOTLAND ON THIS ITEM.

REMEMBER WHEN COMPARING PRICES - OUR PRICES INCLUDE DELIVERY TO MOST UK MAINLAND POSTCODES


WE CAN ONLY SHIP THESE TO THE UK MAINLAND

Click here for larger picture of CL500M Metal Lathe Wit

945.00 1,134.00






Clarke 6 Piece Metal Lathe Tool Turning Set (Ref: 7610319)

Clarke 6 Piece Metal Lathe Tool Turning Set

A popular accessory kit for use with the CL500M or CL430 metal lathes. Contains six various cutting tools for a variety of cutting and milling procedures.

19.50 23.40


Quantity: 

People who bought Clarke 6 Piece Metal Lathe Tool Turning Set also bought::

1. Fixed Steady for Clarke 500M & 430 Lathes





Clarke Stand With Suds Tray For CL500M & 430 Lathe (Ref: 7610315)

Clarke Stand With Suds Tray For CL500M & 430 Lathe

A popular accessory for use with the CL500M or CL430 metal lathes, this suds tray provides substantial support for the machine and contains the swarf and residual cutting fluid produced during milling work.
Dimensions (WxDxH) 960x 460x 800mm
Weight 26kg



178.00 213.60


Quantity: 





4 Jaw Independent Chuck for CL500 & 430 (Ref: 7610316..)

4 Jaw Independent Chuck for CL500 & 430

4 Jaw Independent Chuck & adaptor Plate

157.00 188.40


Quantity: 





Fixed Steady for Clarke 500M & 430 Lathes (Ref: 7610317..,)

Fixed Steady for Clarke 500M  & 430 Lathes



48.00 57.60


Quantity: 

People who bought Fixed Steady for Clarke 500M & 430 Lathes also bought::

1. Clarke 6 Piece Metal Lathe Tool Turning Set





Travelling Steady for Clarke 500M & 430 Lathes (Ref: 7610318..,)

Travelling Steady for Clarke 500M  & 430 Lathes



45.95 55.14


Quantity: 





Machine Block  (Ref: 7610324.,)

Machine Block

For raising the work (vice not included).

59.50 71.40


Quantity: 

People who bought Machine Block also bought::

1. 10mm T Bolt Set
2. Glanze Clamp Type Indexable Parting Tool 12 mm
3. Morse Taper Sleeves- MT3-MT4 Open Ended





Milling Chuck with Collets (Ref: 7610323.,)

Milling Chuck with Collets

Includes 4 6 8 10 12 14 & 16mm collets Complete with MT3 collet chuck with a M12 drawbar thread.

101.28 121.54


Quantity: 

People who bought Milling Chuck with Collets also bought::

1. 12 PC Set of HSS Metric Centre Drills
2. Glanze 4 PC Lathe Starter Set With 12 MM Shank
3. 10mm T Bolt Set





LIVE CENTRE (Ref: 7610320.,)

LIVE CENTRE



22.94 27.53


Quantity: 

People who bought LIVE CENTRE also bought::

1. Milling Chuck with Collets





Milling Cutter 2" (Ref: 7610322.,)

Milling Cutter 2



51.00 61.20


Quantity: 

People who bought Milling Cutter 2" also bought::

1. 52 Pc Clamping Kit 12mm Slot 10mm Stud
2. Morse Taper Sleeves- MT3-MT4 Open Ended
3. Spare 2 mm Parting Insert





10mm T Bolt Set (Ref: 7610326.,)

10mm T Bolt Set



12.34 14.81


Quantity: 

People who bought 10mm T Bolt Set also bought::

1. Machine Block
2. 1" STAINLESS STEEL ROUND
3. 1 1/2 " MILD STEEL ROUND





8" Faceplate (Ref: 7610325.,)

8



60.43 72.52


Quantity: 








Clarke CL500M Lathe & Accessories - Buy online at Chronos (call us or click live chat for help with Clarke CL500M Lathe & Accessories)
Visit our engineering blog