Punches, Scribers, Surface Gauges, Hammers



Optical Centrepunch  (Ref: 180975)

Optical Centrepunch

New Style - OPTICAL CENTREPUNCH SET


Similar to the above mut with a slightly different method of opertion

This very useful and attractive tool is a must when accurate centrepunching is required
Achieve precise punch location
It is supplied with 2 perspex rods with either cross hair or bullseye target- these are precision made so as to magnify and illuminate the workpiece to be punched

Using either one of the rods to posiition the body is then simple. After that you simply rotate the top section and click it into place. This will leave either the 60 or 90 degree hardened steel punch in the exact position required.

Punches 9.5mm diameter 60° or 90°

Supplied in a Plastic Storage Box

EVERY WORKSHOP SHOULD HAVE ONE!
CLICK THE IMAGE FOR A LARGER PICTURE!


31.82 38.18


Quantity: 

People who bought Optical Centrepunch also bought::

1. Transfer Punch 5-20mm
2. Dasqua 0-25 mm x 0.001 mm Outside Micrometer
3. Pack of 25 Brass Washers 6 BA





New 14 Pc Wad Punch Set (Ref: 22032S03)

New 14 Pc Wad Punch Set

Great new Set !!!- make an accurate and clean hole !
A set of 14 quality hardened steel wad punches in the following sizes.
3/16 (5mm)
1/4 (6mm)
5/16 (8mm)
3/8 (10mm)
7/16 (11mm)
1/2 (13mm)
5/8 (16mm)
3/4 (19mm)
7/8 (22mm)
1" (25mm)
1 1/8 (28mm)
1 1/4 (32mm )
1 3/8 (35mm)

Included is a comfortable rubber protection handle.

22.72 27.26


Quantity: 





10 Pc Wad Punch Set  (Ref: SDY032.)

10 Pc Wad Punch Set

Also known as hollow punches
5 6 8 10 12 15 16 22 25 & 32mm

13.62 16.34


Quantity: 

People who bought 10 Pc Wad Punch Set also bought::

1. 4 MT TEST BAR
2. M10 X 1.25 HSS DIE





Ratchet Drive Screw Punch Set (Knockout punches) (Ref: 21282S02)

Ratchet Drive  Screw Punch Set (Knockout punches)

New - Quality Screw punch set-

Put clean holes in steel, aluminum, fiberglass and plastic with this knockout punch kit
For easily making holes in sheet metal- covers the range 22- 60.8 mm
Contents
1 x HSS Pilot Stepped Drill
1 x Ratchet Handle Drive
1 x Set Punches 1/2 " 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
1 x Set Punches 22 27.5 34.3 43 49 60.8 mm


50.04 60.05


Quantity: 

People who bought Ratchet Drive Screw Punch Set (Knockout punches) also bought::

1. Transfer Punch 20-35mm
2. Transfer Punch 5-20mm
3. Dustproof Halogen Gooseneck Lamp





Toolmakers Surface Gauge Small  (Ref: SG47.)

Toolmakers Surface Gauge Small

Base and scriber hardened. Bottom grooved for cylindrical work, complete with fine adjustment. Base has two retractable gauge pins to set against the edge of a surface plate. Supplied with 4" & 7" Spindles
Base size 40 x 55 x 20 mm


12.92 15.50


Quantity: 

People who bought Toolmakers Surface Gauge Small also bought::

1. Double Ended Scriber
2. Toolmakers Clamp 4"
3. Rubber Blower





Toolmakers Surface Gauge Large  (Ref: SG92.)

Toolmakers Surface Gauge Large

Base and scriber hardened. Bottom grooved for cylindrical work, complete with fine adjustment. Base has two retractable gauge pins to set against the edge of a surface plate. Supplied with 9" & 12" Spindles
Base Size 65 x 80 x 25 mm

16.95 20.34


Quantity: 

People who bought Toolmakers Surface Gauge Large also bought::

1. Toolmakers Surface Gauge Small
2. Combined Screw Pitch Gauge Metric / Whitworth SORRY OUT OF STOCK
3. Depth Gauge Rule





5 pc Centrepunch Set - ROUND HEAD  (Ref: CPR1)

5 pc Centrepunch Set - ROUND HEAD

This set contains punches 1/16, 5/64, 3/32, 9/62 & 5/32 punches. They are made of hardened & tempered toolsteel with a heavy knurled body.

4.10 4.92


Quantity: 

People who bought 5 pc Centrepunch Set - ROUND HEAD also bought::

1. Double Ended Scriber
2. Transfer Punch 5-20mm
3. Draper Expert 600mm/24" Stainless Steel Rule





5 pc Centrepunch Set - Square Head  (Ref: CPSQ1)

5 pc Centrepunch Set - Square Head

This set contains punches 1/16, 5/64, 3/32, 9/62 & 5/32 punches. They are made of hardened & tempered toolsteel with a heavy knurled body.
Square Head top prevent them rolling away

5.10 6.12


Quantity: 

People who bought 5 pc Centrepunch Set - Square Head also bought::

1. Double Ended Scriber
2. Hand File Medium - 8" Long





Set of 8 Soba Centrepuches 1/16 - 7/32  (Ref: 180905)

Set of 8 Soba Centrepuches 1/16 - 7/32

Set of High Quality Soba Centrepunches

1/16
5/64
1/8
5/32
9/64
7/32
3/16

10.42 12.50


Quantity: 

People who bought Set of 8 Soba Centrepuches 1/16 - 7/32 also bought::

1. Parallel Set
2. G&J Hall HB1 Handiburr Chamferbit 12.4mm
3. Dasqua Telescopic Bore Gauge Set 8 mm - 150 mm Up to 150 mm Depth





Soba 8 Piece set of Nail & Centre Punches (Ref: 180910)

Soba 8 Piece set of Nail & Centre Punches

Excellent Quality
Includes 4 Centre Punches - 1/16 - 1/8 - 5/32 - 3/16
4 Nail Punches - 1/32 - 1/16 - 3/32 - 1/8


10.64 12.77


Quantity: 





Centrepunch with Magnifier  (Ref: CPM1.)

Centrepunch with Magnifier

This tool comprises a handy size centre punch with a lens attached to the side by means of a U shaped spring clip. This allows adjustment to suit the user.

4.10 4.92


Quantity: 

People who bought Centrepunch with Magnifier also bought::

1. Scriber with Carbide Tip
2. Centre Finder for Round Bar
3. NEW- AUTOMATIC CENTRE PUNCH SET





Automatic Centrepunch , Carbide Scriber & Pick Up Tool (Ref: GX25)

Automatic Centrepunch , Carbide Scriber & Pick Up Tool

Quality Set and a superb Xmas Gift!.
This comprises of a heavy duty adjustable Automatic Centre Punch and a Carbide Scriber with houses a magnetic pick up tool at the other end!!
CLICK THE IMAGE FOR A LARGER PICTURE

9.97 11.96


Quantity: 

People who bought Automatic Centrepunch , Carbide Scriber & Pick Up Tool also bought::

1. 5 in 1 35 mm Interchangeable Head Hammer
2. Soba HSS Spiral Hand Reamer 8 mm
3. Soba Engineers Precision Marking Set





Heavy Duty Automatic Centrepunch  (Ref: ACP1.)

Heavy Duty Automatic Centrepunch

The automatic centrepunch gives a clear indent without hammering. Just press down and a sharp blow results The depth of impression is variable by turning the top knurled cap. New Improved heavy duty version.

4.50 5.40



People who bought Heavy Duty Automatic Centrepunch also bought::

1. 4"/100 Engineers Square





NEW- AUTOMATIC CENTRE PUNCH SET  (Ref: 180205)

NEW- AUTOMATIC CENTRE PUNCH SET

THIS SET COMPRISES A HEAVY DUTY AUTOMATIC CENTRE PUNCH WHICH IS EASY TO USE WITH SINGLE HANDED OPERATION.THE DEPTH OF PUNCH CAN BE EASILY ADJUSTED BY TURNING THE END CAP. THE REPLACEABLE POINT IS MADE FROM HARDENED ALLOY STEEL.

AS A BONUS A SECOND SIMILAR AUTOMATIC PUNCH IS ALSO INCLUDED. THIS ONE IS LIGHTER AND EASY TO CARRY IN YOUR POCKET ETC. BOTH TOOLS COME WITH SPARE PUNCHES.- FANTASTIC VALUE AND ONLY AVAILABLE FROM CHRONOS!!

9.60 11.52


Quantity: 

People who bought NEW- AUTOMATIC CENTRE PUNCH SET also bought::

1. Centrepunch with Magnifier
2. HSS Hole Type Deburrer 90 Degree 5-10 mm
3. Sharp 100 mm 4 Jaw Self Centering Lathe Chuck





Rivet Nail Punch - 1/8 (Ref: PU1222A)

Rivet Nail Punch - 1/8

Rivet / Nail Punch

Tip Dia 1/16

Length - 3"

1.25 1.50


Quantity: 





Rivet Nail Punch - 3/16 (Ref: PU1222D)

Rivet Nail Punch - 3/16

Rivet / Nail Punch

Tip Dia 9/64

Length - 4"

1.25 1.50


Quantity: 





Rivet Nail Punch - 5/32 (Ref: PU1222E)

Rivet Nail Punch - 5/32

Rivet / Nail Punch

Tip Dia 5/32

Length - 4"

1.25 1.50


Quantity: 





Transfer Punch 20-35mm  (Ref: TP2)

Transfer Punch 20-35mm

Simple and effective way to mark the centre of an existing hole onto a workpiece below.

4.90 5.88


Quantity: 

People who bought Transfer Punch 20-35mm also bought::

1. Transfer Punch 5-20mm
2. Solid Body Scriber with Carbide Tip





Transfer Punch 5-20mm  (Ref: TP1)

Transfer Punch 5-20mm

Simple and effective way to mark the centre of an existing hole onto a workpiece below.

3.90 4.68


Quantity: 

People who bought Transfer Punch 5-20mm also bought::

1. Transfer Punch 20-35mm
2. Soba Engineers Dividers 3"
3. 5 pc Centrepunch Set - ROUND HEAD





Imperial Transfer Punch Set  (Ref: TPS1.)

Imperial Transfer Punch Set

These punches are manufactured from tool steel and are hardened & tempered. This 28 piece set is supplied in a convenient stand and comprises sizes from 3/32 - 1/2" in increments of 1/64" plus one 17/32 punch.


15.00 18.00


Quantity: 

People who bought Imperial Transfer Punch Set also bought::

1. 1/4 BSF HSS Taps
2. Large Imperial Transfer Punch Set
3. 3/16 BSF HSS Taps





Large Imperial Transfer Punch Set (Ref: TPS1L)

Large Imperial Transfer Punch Set

Made of finest Toolsteel - Black Oxide Finish
Heat Treated and Tempered

Set of 33 1/2 - 1 " x 1/64

4 7/8" Long



22.00 26.40


Quantity: 

People who bought Large Imperial Transfer Punch Set also bought::

1. Imperial Transfer Punch Set





A-Z Letter Transfer Punch Set  (Ref: TPS3)

A-Z Letter Transfer Punch Set

These punches are manufactured from tool steel and are hardened & tempered. This 26 piece set is supplied in a convenient stand and comprises sizes Letter A - Zmm.


15.00 18.00


Quantity: 

People who bought A-Z Letter Transfer Punch Set also bought::

1. Edge Finder Set
2. BSW BSF Thread Restoring File
3. UNC SAE Thread Restoring File





1/16 Number Punch Set  (Ref: MLS200..)

1/16 Number Punch Set

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

6.00 7.20


Quantity: 

People who bought 1/16 Number Punch Set also bought::

1. 1/16 Letter Punch Set
2. Economy Sets of 5 Indexable Lathe Tools 1/4 PLUS 2 FREE INSERTS !
3. 6 MM SILVER STEEL





1/8 Number Punch Set  (Ref: MLS202..)

1/8 Number Punch Set

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

7.00 8.40


Quantity: 

People who bought 1/8 Number Punch Set also bought::

1. 1/8 Letter Punch Set
2. Stuarts Marking Paste (Tin)
3. Drill Chuck Key 8mm Pin 11 Teeth





3/16 Number Punch Set  (Ref: MLS203..)

3/16 Number Punch Set

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

8.00 9.60


Quantity: 





1/4 Number Punch Set  (Ref: MLS204..)

1/4 Number Punch Set

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

9.00 10.80


Quantity: 

People who bought 1/4 Number Punch Set also bought::

1. Toolmakers V Block & Clamp
2. 1 Litre Multispec Cutting & Tapping Fluid
3. 1/4 Letter Punch Set





1/16 Letter Punch Set (Ref: MLS210...)

1/16 Letter Punch Set

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

10.00 12.00


Quantity: 

People who bought 1/16 Letter Punch Set also bought::

1. 1/16 Number Punch Set
2. 1 Litre Multispec Cutting & Tapping Fluid
3. New Soba 19 pc Model Engineer Series Tap & Die Set





1/8 Letter Punch Set  (Ref: MLS212..)

1/8 Letter Punch Set

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

11.00 13.20


Quantity: 

People who bought 1/8 Letter Punch Set also bought::

1. 1/8 Number Punch Set
2. 7 MM SILVER STEEL
3. 6 MM SILVER STEEL





3/16 Letter Punch Set  (Ref: MLS213...)

3/16 Letter Punch Set

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

12.00 14.40


Quantity: 

People who bought 3/16 Letter Punch Set also bought::

1. Set of 18 Qulity Pin Punches Plus Automatic Centrepunch
2. Draper Expert 600mm/24" Stainless Steel Rule
3. Dasqua High Precision Shock Resistant Dial Gauge 0-10 mm x 0.01 mm





1/4 Letter Punch Set  (Ref: MLS214...)

1/4 Letter Punch Set

These punches are hand cut and hardened with a black shiny finish and come complete with a storage box.

15.00 18.00


Quantity: 

People who bought 1/4 Letter Punch Set also bought::

1. New Deburring Tool for Sheet Metal
2. 18" Mini Bending Brakes
3. Toolmakers V Block & Clamp





Double Ended Scriber (Ref: DES1.)

Double Ended Scriber

180 mm Long
Double Ended
Hardened
Knurled Body

1.37 1.64


Quantity: 

People who bought Double Ended Scriber also bought::

1. 5 pc Centrepunch Set - ROUND HEAD
2. Toolmakers Surface Gauge Small
3. Steel Rules





Solid Body Scriber with Carbide Tip (Ref: SB1411B)

Solid Body Scriber with Carbide Tip

Can be used on the hardest metals , glass etc . Slim design - comfortable to use

Length 6" / 150 mm

2.00 2.40


Quantity: 

People who bought Solid Body Scriber with Carbide Tip also bought::

1. Transfer Punch 5-20mm
2. Single Ended Scriber
3. SET OF 10 CCMT CARBIDE INSERTS TRIPLE COATED (BLACK)





Single Ended Scriber  (Ref: SC2.)

Single Ended Scriber

160 mm Long
Hardened
Knurled Body

0.91 1.09


Quantity: 

People who bought Single Ended Scriber also bought::

1. Solid Body Scriber with Carbide Tip
2. Set of 4 HSS Centre Drills BS1 2 3 & 4
3. Steel Rules





Scraper/Scriber  (Ref: SC3.)

Scraper/Scriber



1.78 2.14


Quantity: 

People who bought Scraper/Scriber also bought::

1. Solid Body Scriber with Carbide Tip
2. Transfer Punch 20-35mm





Scriber with Carbide Tip (Ref: SC4.)

Scriber with Carbide Tip



4.52 5.42


Quantity: 

People who bought Scriber with Carbide Tip also bought::

1. Spare Tip for SC4 Scriber
2. HSS DRILL BIT 2.5 MM
3. Centrepunch with Magnifier





Spare Tip for SC4 Scriber (Ref: SC4S)

Spare Tip for SC4 Scriber



1.00 1.20


Quantity: 

People who bought Spare Tip for SC4 Scriber also bought::

1. Scriber with Carbide Tip
2. Dasqua Metric Dial Test Inicator Kit with Holders
3. SET OF 10 CCGT CARBIDE INSERTS FOR GLANZE LATHE TOOLS- A SUPERIOR FINISH ON ALUMINIUM ETC !





5/32 Pin Punch (Ref: PU1121D)

5/32 Pin Punch

Standard Pin Punch

Tip Dia - 5/32

Body Dia - 25/64

Overall Length - 4"

1.25 1.50


Quantity: 

People who bought 5/32 Pin Punch also bought::

1. Replacement HSS Parting Blade For PT001
2. Small 8 mm Square Parting Tools
3. 5/8 MILD STEEL ROUND





3/16 Pin Punch (Ref: PU1121E)

3/16 Pin Punch

Standard Pin Punch

Tip Dia - 3/16

Body Dia - 25/64

Overall Length - 4"

1.25 1.50


Quantity: 

People who bought 3/16 Pin Punch also bought::

1. Transfer Punch 5-20mm
2. 2 MT Drill Chuck Drift
3. 5/16 Pin Punch





7/32 Pin Punch (Ref: PU1121F)

7/32  Pin Punch

Standard Pin Punch

Tip Dia - 7/32

Body Dia - 25/64

Overall Length - 4"

1.25 1.50


Quantity: 





1/4 Pin Punch (Ref: PU1121G)

1/4  Pin Punch

Standard Pin Punch

Tip Dia - 1/4

Body Dia - 25/64

Overall Length - 4"

1.25 1.50


Quantity: 

People who bought 1/4 Pin Punch also bought::

1. HSS DRILL SET - 25 pc 1 - 13mm x 0.5mm
2. 5/16 Pin Punch
3. M10 X 1.0 THREAD REPAIR KIT





5/16 Pin Punch (Ref: PU1121H)

5/16 Pin Punch

Standard Pin Punch

Tip Dia - 5/16

Body Dia - 1/2

Overall Length - 4"

1.25 1.50


Quantity: 

People who bought 5/16 Pin Punch also bought::

1. Transfer Punch 5-20mm
2. 2 MT Drill Chuck Drift
3. 1/4 Pin Punch





Pin Punch Set 1/16 - 5/32  (Ref: PP1..)

Pin Punch Set 1/16 - 5/32

4 pc Set 1/16 , 3/32 , 1/8 & 5/32

4.10 4.92


Quantity: 

People who bought Pin Punch Set 1/16 - 5/32 also bought::

1. Transfer Punch 5-20mm
2. 5 pc Centrepunch Set - ROUND HEAD
3. Digital Height Gauge





Pin Punch Set 3/16 - 5/16 (Ref: PP2,,,)

Pin Punch Set 3/16 - 5/16

4 PC Set 3/16 , 7/32 , 1/4 & 5/16

4.10 4.92


Quantity: 





8pc Pin Punch Set 1/16 - 5/16  (Ref: PP3.)

8pc Pin Punch Set 1/16 - 5/16

8 pc Set -1/16 , 3/32 , 1/8 , 5/32 , 3/16 , 7/32 , 1/4 & 5/16
Great Quality with a heavy knurled body - 4" long
Supplied in a storage wallet

7.75 9.30


Quantity: 

People who bought 8pc Pin Punch Set 1/16 - 5/16 also bought::

1. HSS Hole Type Deburrer 90 Degree 2-5 mm
2. HSS Hole Type Deburrer 90 Degree 5-10 mm
3. Double Ended Scriber





Set of 18 Qulity Pin Punches Plus Automatic Centrepunch  (Ref: 180650)

Set of 18 Qulity Pin Punches Plus Automatic Centrepunch

New from Soba and with the quality you would expect. This set includes 17 Pin Pin Punches which are marked with their appropriate size in both Metric & Imperial. Both standard and long series punches are included A good quality adjustable automatic centrepunch is also included and the set is presented in a handy roll up pouch. Sizes are as follows:

3/8 x 8"
5/16 x 8"
1/4 x 8"
3/16 x 8"
5/32 x 8"
1/8 x 8"
3/32 x 8"
1/16 x 8"
1/16 x 4"
3/32 x 4"
1/8 x 4"
5/32 x 4"
3/16 x 4"
7/32 x 4"
1/4 x 4"
5/16 x 6"
3/8 x 6"

20.03 24.04


Quantity: 

People who bought Set of 18 Qulity Pin Punches Plus Automatic Centrepunch also bought::

1. Soba HSS Spiral Hand Reamer 1/2
2. A3 Self Healing Cutting Mat 30 Cm x 45 CM x 3 MM
3. Draper Expert 600mm/24" Stainless Steel Rule





Long Drive Pin Punch Set  (Ref: 180600)

Long Drive Pin Punch Set

Centreless ground,hardened & tempered, 8" overall length .Supplied in plastic wallet. Drive pin section 3 1/2".

8.00 9.60


Quantity: 

People who bought Long Drive Pin Punch Set also bought::

1. 10 Pc Wad Punch Set
2. Pin Punch Set 1/16 - 5/32





Long Series Drive Pin Punch 1/4 (Ref: PU1101C)

Long Series Drive Pin Punch 1/4

Long Series Drive Pin Punch

Tip- 1/4 Dia

Dody - 1/2 Dia

Overall Length - 8"

1.75 2.10


Quantity: 





Long Series Drive Pin Punch 5/16 (Ref: PU1101D)

Long Series Drive Pin Punch 5/16

Long Series Drive Pin Punch

Tip- 5/16 Dia

Dody - 1/2 Dia

Overall Length - 8"

1.75 2.10


Quantity: 





Long Series Drive Pin Punch 3/8 (Ref: PU1101E)

Long Series Drive Pin Punch 3/8

Long Series Drive Pin Punch

Tip- 3/8 Dia

Dody - 9/16 Dia

Overall Length - 8"

1.75 2.10


Quantity: 

People who bought Long Series Drive Pin Punch 3/8 also bought::

1. Transfer Punch 5-20mm
2. 2 MT Drill Chuck Drift
3. 5/16 Pin Punch





Chisel & Punch Holder  (Ref: CPH1..)

Chisel & Punch Holder

This handy holder allows you to hold punches and chisels in normally inaccessible work areas. Heavy duty plastic handle with nylon tip and steel frame reduce risk of hand injury. Capacity 0-1" chisels & punches.

3.60 4.32


Quantity: 

People who bought Chisel & Punch Holder also bought::

1. HSS DRILL SET 29 pc 1/16 - 1/2 x 64ths
2. Hand File Medium - 8" Long





Jewellers Anvil  (Ref: AV13..)

Jewellers Anvil

Anvil in x 1 1/4". Chrome finish.


11.00 13.20


Quantity: 

People who bought Jewellers Anvil also bought::

1. Transfer Punch 20-35mm
2. Transfer Punch 5-20mm





Iron Doming Block  (Ref: 192425)

Iron Doming Block

Heavy duty iron doming block with 6 sides providing 17 different sizes of dome.
2 1/2" Square

19.24 23.09


Quantity: 

People who bought Iron Doming Block also bought::

1. Dial Test Indicator Metric
2. Dasqua Inside Micrometer 5 - 30 mm x 0.01 mm
3. Dasqua Depth Micrometer 0 - 100 mm SORRY OUT OF STOCK





Stuarts Marking Paste (Tin) (Ref: SLB100...)

Stuarts Marking Paste (Tin)

A non abrasive , easily spread marking paste with many applications. Very good for showing high spots etc. 38gm tin

4.80 5.76


Quantity: 

People who bought Stuarts Marking Paste (Tin) also bought::

1. Steel Metric Rolls 150mm x 2.5m - Linear Code: 77-316-971





Stuarts Marking Paste (Tube) (Ref: SLB2...)

Stuarts Marking Paste (Tube)



4.80 5.76


Quantity: 

People who bought Stuarts Marking Paste (Tube) also bought::

1. Spare 2 mm Parting Insert
2. Traditional Style straight Tap Wrench M1-M6
3. Set of M6 TEE Nuts





Multi Headed Hammer (Ref: MHH1)

Multi Headed Hammer

This useful hammer comes complete with 6 interchangeable heads,has a knurled aluminium handle and a strong steel shaft ands hammer body.
Six screw-on tips include: Brass flat, Steel ball, Steel dome, Steel flat, and Poly flat.
Ideal hammer for shaping and forming, and removing dents in watch casements. Suitable for jewellers, watch repairs and hobby projects.All metal construction, chrome finished, knurled easy grip handle.


7.99 9.59


Quantity: 

People who bought Multi Headed Hammer also bought::

1. 1/4 X 19 BSP CARBON DIE
2. 1/4 Brass Hexagon
3. SOFT BLANK END ARBOR 2 MT TANG END





5 in 1 35 mm Interchangeable Head Hammer (Ref: 70009A03)

5 in 1  35 mm Interchangeable Head Hammer

Instead of 5 hammers cluttering your workbench, have one hammer with 5 faces!
Dozens of uses at home, work and shop.
Multi-functional for woodworking, metal work, arts and crafts, and hobbies.
Classic hickory handle preferred by pros;
Threaded faces are easy to change, stay secure on zinc head.
Include hard-to-find copper for metal work without sparks. Metal head for other hard work,
Alu ,PU, Nylon head provide varying hardness for non-marring blows,and less recoil.
Head Size 35 MM



18.30 21.96


Quantity: 

People who bought 5 in 1 35 mm Interchangeable Head Hammer also bought::

1. Draper 8 Piece 200mm Soft Grip Engineers File and Rasp Set
2. Automatic Centrepunch , Carbide Scriber & Pick Up Tool
3. Engineering Materials








Punches, Scribers, Surface Gauges, Hammers - Buy online at Chronos (call us or click live chat for help with Punches, Scribers, Surface Gauges, Hammers)
Visit our engineering blog