Soba & Other Brand Rotary Tables and accessories



NEW ! Soba 5" / 125 mm Rotary Table , Dividing Set & Tailstock Kit  (Ref: 111025)

NEW ! Soba 5

CLICK HERE FOR MORE INFO !

FANTASTIC OFFER- PRICE INCLUDES THE ROTARY TABLE , SET OF 3 DIV PLATES TAILSTOCK, AND A CLAMPING KIT
They have a totally ground finish which provides high precision and smooth rotation - The centre of the table is fitted to an inner conical Morse tapered MT2 sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing.

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE

197.33 236.80


Quantity: 

People who bought NEW ! Soba 5" / 125 mm Rotary Table , Dividing Set & Tailstock Kit also bought::

1. SOFT BLANK END ARBOR 2 MT TANG END
2. New 4 Jaw Chuck on Mounting Plate for 4" Table





NEW ! Soba 5" / 125 mm Rotary Table , Chuck , Dividing Set & Tailstock Kit  (Ref: 111026)

NEW ! Soba 5

CLICK HERE FOR MORE INFO !

FANTASTIC OFFER- PRICE INCLUDES THE ROTARY TABLE , SET OF 3 DIV PLATES TAILSTOCK, AND A CLAMPING KIT
They have a totally ground finish which provides high precision and smooth rotation - The centre of the table is fitted to an inner conical Morse tapered MT2 sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing.

80 mm 4 Jaw Self Centering Chuck & Backplate included

CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE




243.00 291.60


Quantity: 

People who bought NEW ! Soba 5" / 125 mm Rotary Table , Chuck , Dividing Set & Tailstock Kit also bought::

1. Set of 7 Soba Precision Parallels 95mm Long
2. 4 PC Combo Set - Step Drill - Drill saw - Conecut Taper Drill & Deburrer
3. New Sliding Tailstock Dieholder Kit 2 MT





4" Rotary Table HV4 Type Four Slot Model (Ref: SHHV4)

4

These tables have a totally ground finish which provides high precision and smooth rotation - everything you would expect from Shobha. The centre of the table is fitted to an inner conical Morse tapered sleeve MT2.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing.. Table diameter - 110 mm - Table height - 80 mm - Centre height - 80mm - Centre sleeve - 2MT.3 T slots

CLICK THE IMAGE FOR A LARGER PICTURE

78.57 94.28


Quantity: 

People who bought 4" Rotary Table HV4 Type Four Slot Model also bought::

1. Myford Chuck Adaptor for HV6 & HV4
2. New Soba 40mm Boring Head with 2 MT Shank
3. SOFT BLANK END ARBOR 2 MT TANG END





Rotary Table HV6 150mm  (Ref: 110242)

Rotary Table HV6 150mm

They have a totally ground finish which provides high precision and smooth rotation - The centre of the table is fitted to an inner conical Morse tapered MT2 sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing. . Table diameter - 150 mm - Table height - 80 mm - Centre height - 105mm - Centre sleeve - 2MT.4 T slots

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE

124.00 148.80


Quantity: 

People who bought Rotary Table HV6 150mm also bought::

1. Clamp Set for HV4 & HV6" Rotary Tables
2. DP1 Dividing Plate Set for HV4 & HV6 Type Tables
3. Chuck Adaptor for Four Slot 6" Rotary Tables with Boxford Thread





SHOBA 6" ROTARY TABLE & DIVIDING PLATES  (Ref: 110242T)

SHOBA 6

Click Here for User Manual

AS ABOVE BUT WITHOUT THE TAILSTOCK
REMEMBER OUR PRICE INCLUDES VAT & CARRIAGE UK MAINLAND!!

167.00 200.40


Quantity: 





SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK etc  (Ref: 111015)

SOBA 6

Click Here for User Manual

FANTASTIC OFFER- PRICE INCLUDES THE ROTARY TABLE , SET OF 3 DIV PLATES TAILSTOCK, AND A CLAMPING KIT

SUPERIOR 4 SLOT MODEL - AND NOW INCLUDING A CLAMPING KIT


They have a totally ground finish which provides high precision and smooth rotation - The centre of the table is fitted to an inner conical Morse tapered MT2 sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing. . Table diameter - 150 mm - Table height - 80 mm - Centre height - 105mm - Centre sleeve - 2MT.4 T slots. OUR TABLE IS SUPPLIED WITH AN 8 PAGE FULL MANUAL - NOT AVAILABLE FROM OTHER SUPPLIERS !




CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE


198.00 237.60


Quantity: 

People who bought SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK etc also bought::

1. Chuck Adaptor for Four Slot 6" Rotary Tables with Myford Thread
2. Clamp Set for HV4 & HV6" Rotary Tables
3. New 100 mm 3 Jaw Chuck and Mounting Plate to Suit Soba 6 & 8" HV6/8 Rotary Tables





SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK & 4 JAW S/C CHUCK (Ref: 111016)

SOBA 6

Click Here for User Manual

FANTASTIC OFFER- PRICE INCLUDES THE ROTARY TABLE , SET OF 3 DIV PLATES TAILSTOCK, AND A CLAMPING KIT- PLUS A 100 MM 4 JAW SELF CENTERING CHUCK

They have a totally ground finish which provides high precision and smooth rotation - The centre of the table is fitted to an inner conical Morse tapered MT2 sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing. . Table diameter - 150 mm - Table height - 80 mm - Centre height - 105mm - Centre sleeve - 2MT.4 T slots. OUR TABLE IS SUPPLIED WITH AN 8 PAGE FULL MANUAL - NOT AVAILABLE FROM OTHER SUPPLIERS!

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE





281.54 337.85


Quantity: 





Chuck Adaptor for Four Slot 6" Rotary Tables with Boxford Thread  (Ref: 112191)

Chuck Adaptor for Four Slot 6

New- These are new in and allow you to easily mount a Boxford ( 1 1/2 x 8 TPI) threaded chuck to your 6" /150mm 4 slot Rotary Table
Plate is 125 mm diameter and 10mm thick

4 mounting lugs - 8 mm wide
Four T nuts and studs are included
T nust are 10mm wide at the top and 16 mm wide at the bottom
CLICK THE IMAGE TO SEE THE PLATE MOUNTED ON A ROTARY TABLE


24.13 28.96


Quantity: 

People who bought Chuck Adaptor for Four Slot 6" Rotary Tables with Boxford Thread also bought::

1. SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK etc
2. Rotary Table HV6 150mm
3. Morse Taper Sleeves- MT1-MT2 Open Ended





New 100 mm 3 Jaw Chuck and Mounting Plate to Suit Soba 6 & 8" HV6/8 Rotary Tables  (Ref: 145055)

New 100 mm 3 Jaw Chuck and Mounting Plate to Suit Soba 6 & 8

This new tem is a must have accessory for the Soba HV6 Rotary Table or any similar 4 slot unit
It comprises a good quality 3 Jaw Chuck complete with 2 sets of jaws and a key. This is mounted on a 160mm Aluminium backplate.

Bore through the unit is 25 mm
The Chuck is 50 mm deep . The backplate is 15 mm thick and 150 mm diameter

A set of four fixing screws and T nuts is included

CLICK THE IMAGE FOR A PICTURE OF THE CHUCK MOUNTED ON A ROTARY TABLE (NOT INCLUDED)


104.76 125.71


Quantity: 

People who bought New 100 mm 3 Jaw Chuck and Mounting Plate to Suit Soba 6 & 8" HV6/8 Rotary Tables also bought::

1. SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK etc
2. Rotary Table HV6 150mm
3. SOBA 8" 200MM ROTARY TABLE SET WITH TAILSTOCK & PLATES HV8





DP1 Dividing Plate Set for HV4 & HV6 Type Tables  (Ref: DP1)

DP1 Dividing Plate Set for HV4 & HV6 Type Tables

click here for more info

Suits both Soba & Vertex Type Systems
This excellent dividing attachment can easily be fitted to the HV6 rotary table and includes three plates as follows.
A Plate - 15,16,17,18,19,20
B Plate - 21,23,27,29,31,33
C Plate - 37,39,41,43,47,49
Also included are all necessary screws,washers & handle etc. to fit.

47.00 56.40


Quantity: 

People who bought DP1 Dividing Plate Set for HV4 & HV6 Type Tables also bought::

1. Rotary Table HV6 150mm
2. Clamp Set for HV4 & HV6" Rotary Tables
3. Set of 3 Traditional Lathe Toolbit Holders 22.5 mm H Shank





Chuck Adaptor for Four Slot 6" Rotary Tables with Myford Thread  (Ref: 112190)

Chuck Adaptor for Four Slot 6

New- These are new in and allow you to easily mount a Myford threaded chuck to your 6" /150mm 4 slot Rotary Table
Plate is 125 mm diameter and 10mm thick

4 mounting lugs - 8 mm wide
Four T nuts and studs are included
T nust are 10mm wide at the top and 16 mm wide at the bottom
CLICK THE IMAGE TO SEE THE PLATE MOUNTED ON A ROTARY TABLE


28.00 33.60


Quantity: 

People who bought Chuck Adaptor for Four Slot 6" Rotary Tables with Myford Thread also bought::

1. SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK etc
2. Clamp Set for HV4 & HV6" Rotary Tables
3. Myford Chuck Adaptor for HV6 & HV4





Tailstock for HV4 & HV6" Rotary Tables- SPECIAL OFFER ! (Ref: 111301)

Tailstock for HV4 & HV6

Suits both the HV4 and HV6 Type tables.



Substantial construction
Centre height from 80 to 110mm
Base size 130 x 95mm


A substantially made tailstock with centre height adjustable over the range 80 to 110mm, . The base size is 130 x 95mm and there are 15mm wide slots at the two ends for securing it to the machine table

29.99 35.99


Quantity: 

People who bought Tailstock for HV4 & HV6" Rotary Tables- SPECIAL OFFER ! also bought::

1. 4" Rotary Table HV4 Type Four Slot Model
2. Rotary Table HV6 150mm





Clamp Set for HV4 & HV6" Rotary Tables  (Ref: SCK1)

Clamp Set for HV4 & HV6

This set is suitable for both the Vertex and Soba 6" Rotary tables. The set comprises 4 x Tnuts with matching 3" studs and nuts. 2 x 2" stepped clamps and 2 x 1 3/4 slotted step clamps!
Exclusive to Chronos!

13.66 16.39


Quantity: 

People who bought Clamp Set for HV4 & HV6" Rotary Tables also bought::

1. Rotary Table HV6 150mm
2. SOBA 6" ROTARY TABLE SET C/W PLATES , TAILSTOCK etc
3. DP1 Dividing Plate Set for HV4 & HV6 Type Tables





SOBA 8" 200MM ROTARY TABLE SET WITH TAILSTOCK & PLATES HV8  (Ref: 110243S)

SOBA 8

Click Here for User Manual

FANTASTIC OFFER- PRICE INCLUDES THE ROTARY TABLE , SET OF 3 DIV PLATES TAILSTOCK, AND A CLAMPING KIT

They have a totally ground finish which provides high precision and smooth rotation - The centre of the table is fitted to an inner conical Morse tapered MT3 sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4' of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing. . Table diameter - 200 mm - Table height - 105 mm - Centre height - 135mm - Centre sleeve - 3MT.4 T slots.

OUR TABLE IS SUPPLIED WITH AN 8 PAGE FULL MANUAL - NOT AVAILABLE FROM OTHER SUPPLIERS!


277.00 332.40


Quantity: 

People who bought SOBA 8" 200MM ROTARY TABLE SET WITH TAILSTOCK & PLATES HV8 also bought::

1. New 100 mm 3 Jaw Chuck and Mounting Plate to Suit Soba 6 & 8" HV6/8 Rotary Tables
2. Set of 4 Graduated Engineers Squares
3. LARGE Spare CCMT09T304 Insert





Dividing Set for HV8 Rotary Table  (Ref: 110265)

Dividing Set for HV8 Rotary Table

Similar to above but with two plates as follows:
A Plate - 26,28,30,32,34,37,39,41,43,44,46,47,49,51,53,57,59
B Plate - 61,63,67,69,71,73,77,79,81,83,87,89,81,93,97,99

55.00 66.00


Quantity: 





Tailstock for HV8 Rotary Tables  (Ref: 110247)

Tailstock for HV8 Rotary Tables

Suits the HV8 Type Rotary Tables.
Fully adjustable for centre height

50.87 61.04


Quantity: 

People who bought Tailstock for HV8 Rotary Tables also bought::

1. New 100 mm 3 Jaw Chuck and Mounting Plate to Suit Soba 6 & 8" HV6/8 Rotary Tables





ROT1 - 4" Rotary Table Complete With Clamping Kit  (Ref: MX60...)

ROT1 - 4


Overall height of table under 2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 2 1/16 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear. A set of suitable T nuts, studs and clamps is now included !

2 x Slotted Clamps 40mm x 20 mm
2 x 6mm Studs 50 mm long with nuts
2 x step clamps 25 x 15 mm


62.40 74.88


Quantity: 

People who bought ROT1 - 4" Rotary Table Complete With Clamping Kit also bought::

1. New Soba 40mm Boring Head with 2 MT Shank
2. Soba 70 mm 4 Jaw Self Centering Scroll Chuck
3. Round Toolsteel - HSS round Tool steel - 5/16 dia x 4" long





ROT1 - 4" Rotary Table With Myford Threaded Chuck Adaptor 112185  (Ref: ROT1112185)

ROT1 - 4

PRICE REDUCTION !
AS ABOVE BUT COMPLETE WITH OUR MYFORD THREADED CHUCK ADAPTOR AND MOUNTING KIT !
Overall height of table under 2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 2 1/16 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear.
A set of suitable T nuts, studs and clamps is now included !

2 x Slotted Clamps 40mm x 20 mm
2 x 6mm Studs 50 mm long with nuts
2 x step clamps 25 x 15 mm


76.00 91.20


Quantity: 





ROT1 - 4" Rotary Table With 65 MM 3 Jaw Chuck  (Ref: ROT4J3)

ROT1 - 4

As above but with a 65 mm 3 Jaw Slim Body Chuck , adaptor plate and mounting kit!

PRICE REDUCTION !

Overall height of table under 2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 2 1/16 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear.
A set of suitable T nuts, studs and clamps is now included !

2 x Slotted Clamps 40mm x 20 mm
2 x 6mm Studs 50 mm long with nuts
2 x step clamps 25 x 15 mm


105.00 126.00


Quantity: 

People who bought ROT1 - 4" Rotary Table With 65 MM 3 Jaw Chuck also bought::

1. 19 pc Precision Ground HSS Drill Set 1 - 10mm x 0.5mm
2. Stuarts Marking Paste (Tube)
3. 1 1/4 " MILD STEEL ROUND





ROT1 - 4" Rotary Table With 70 MM 4 Jaw Chuck  (Ref: ROT4J4)

ROT1 - 4

As above but with a 70 mm 4 Jaw Independent Chuck , adaptor plate and mounting kit!

PRICE REDUCTION !

Overall height of table under 2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 2 1/16 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear.

A set of suitable T nuts, studs and clamps is now included !

2 x Slotted Clamps 40mm x 20 mm
2 x 6mm Studs 50 mm long with nuts
2 x step clamps 25 x 15 mm


105.00 126.00


Quantity: 

People who bought ROT1 - 4" Rotary Table With 70 MM 4 Jaw Chuck also bought::

1. Toolmakers Clamp 4"





New Soba 4" / 100 MM Rotary Table c/w Tailstock , Clamp Kit & Chuck (Ref: 111055)

New Soba 4

New Set !


Overall height of table under 2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 2 1/16 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear. A set of suitable T nuts, studs and clamps is now included !

2 x Slotted Clamps 40mm x 20 mm
2 x 6mm Studs 50 mm long with nuts
2 x step clamps 25 x 15 mm


Also Includes a 146025 80 mm 4 Jaw independent Chuck plus a tailstock







119.16 142.99


Quantity: 





Universal Adjustable Tailstock for 100mm / 4" Rotary Tables SORRY OUT OF STOCK (Ref: 111304)

Universal Adjustable Tailstock for 100mm / 4

New from Soba
This adjustable tailstock is suitable for all the Soba & Vertex 4"/100 mm Rotary Tables
Fully Adjustable from 2 1/4" - 3 1/2 "

29.75 35.70



People who bought Universal Adjustable Tailstock for 100mm / 4" Rotary Tables SORRY OUT OF STOCK also bought::

1. Pair of 100mm Magnetic Aluminium Vice Jaws
2. 3" Rotary Table Adaptor with Boxford Thread
3. NEW Tilting Tailstock for 3 & 4" Rotary Tables





Set T Nuts etc for ROT1 4" Rotary Table  (Ref: MX63.)

Set T Nuts etc for ROT1 4

Suits the above Rotary Table

2 x Slotted Clamps 40mm x 20 mm
2 x 6mm Studs 50 mm long with nuts
2 x step clamps 25 x 15 mm

11.67 14.00


Quantity: 





New Tailstock for 4" Table above (Ref: XC163)

New Tailstock for 4

SPECIAL OFFER!!
New and exclusive to Chronos - Tailstock to suit the above rotary table

31.88 38.26


Quantity: 





NEW Tilting Tailstock for 3 & 4" Rotary Tables (Ref: 111311)

NEW Tilting Tailstock for 3 & 4

Latest Design from Soba !

Suits 3 and 4" Rotary Tables
Base size is 135 x 50 mm

Overall Height -150 mm

Range - 40 mm - 80 mm

40.83 49.00


Quantity: 

People who bought NEW Tilting Tailstock for 3 & 4" Rotary Tables also bought::

1. ROT1 - 4" Rotary Table With 65 MM 3 Jaw Chuck
2. Set of 4 HSS Centre Drills BS1 2 3 & 4
3. Live Centre





New 80mm 3 Jaw Chuck on Mounting Plate for Soba 4" Rotary Table  (Ref: 145045)

New 80mm 3 Jaw Chuck on Mounting Plate for Soba 4

New- by popular demand. This is a good quality 80mm 3 Jaw chuck on a specially made backplate to suit the 4" Soba Rotary Tables. It includes inside & outside jaws as well as keys .
Exclusive to Chronos


72.87 87.44


Quantity: 

People who bought New 80mm 3 Jaw Chuck on Mounting Plate for Soba 4" Rotary Table also bought::

1. SCT 4"/100 mm Tilting Drill Press Vice
2. Set of M8 TEE Nuts
3. New 4 Jaw Chuck on Mounting Plate for 4" Table





65 MM 3 Jaw Chuck on Backplate for 3 & 4" Rotary Tables  (Ref: 145012)

65 MM 3 Jaw Chuck on Backplate for 3 & 4

This comprises a good quality 65 mm dia Slim Body 3 jaw chuck with reversible jaws and adjusting bars mounted on a slotted backplate. This will fit any 3 or 4" rotary table with 4 slots. The chuck mounting is standard Unimat Thread M14 x 1
CLICK THE IMAGE TO SEE THIS UNIT MOUNTED ON A 4" ROTARY TABLE

41.25 49.50


Quantity: 

People who bought 65 MM 3 Jaw Chuck on Backplate for 3 & 4" Rotary Tables also bought::

1. Set of 3 HSS Step Drills
2. Centre Finder for Round Bar
3. DP1 Dividing Plate Set for HV4 & HV6 Type Tables





70 MM 4 Jaw Independent Chuck on Backplate for 3 & 4" Rotary Tables  (Ref: 146015)

70 MM 4 Jaw Independent Chuck on Backplate for 3 & 4

This comprises a good quality 70 mm dia 4 jaw chuck and key mounted on a slotted backplate. This will fit any 3 or 4" rotary table with 4 slots. The chuck mounting is standard Unimat Thread M14 x 1


38.30 45.96


Quantity: 

People who bought 70 MM 4 Jaw Independent Chuck on Backplate for 3 & 4" Rotary Tables also bought::

1. Set of 72 Assorted Piercing Saw Blades
2. 3" Rotary Table With 65 mm 3 Jaw Chuck
3. 3" Rotary Table Suitable for Myford Type Milling Slides for Myford Lathes with Clamping Kit





New 4 Jaw Chuck on Mounting Plate for 4" Table  (Ref: 146025)

New 4 Jaw Chuck on Mounting Plate for 4

This new product is an excellent accessory for any of the 4" four slot Soba Rotary Tables.
It is a good quality 4 Jaw independent chuck mounted on a specially made plate with 4 slots to allow easy fitment to the table. Chuck Diameter is 80mm and the chuck body is 30mm deep.
Exclusive to Chronos


45.49 54.59


Quantity: 

People who bought New 4 Jaw Chuck on Mounting Plate for 4" Table also bought::

1. 52 Pc Clamping Kit 12mm Slot 10mm Stud
2. 4" Rotary Table HV4 Type Four Slot Model
3. SCT 4"/100 mm Tilting Drill Press Vice





4" Tilting Rotary Table  (Ref: 111305)

4

Excellent 4" table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear. Complete with Tiliting Table - Adjusts to 90 degrees!!

68.00 81.60


Quantity: 





New 3" Tilting Rotary Table with Clamping Kit  (Ref: 111307)

New 3

This is the very latest 3"/75mm Tilting Rotary Table
Unlike inferior copies it has 4 T-slots for fixing work
Table tilts upto 90 degrees and can be used anywere in between and locked. The tilting actions is graduated
The base is 100 x 95 mm with 2 x 10mm mounting holes which are 80 mm apart
Overall height when not tilted is 55 mm
The table is graduated 0-360 degrees in 5 degree divisions
The handle is graduated 0-10 degrees in 5 minute divisions


58.25 69.90


Quantity: 

People who bought New 3" Tilting Rotary Table with Clamping Kit also bought::

1. Spare Parting Blade 1/2
2. Mini Quick Change Toolpost for Variable Speed Mini Lathes etc
3. Multi-Purpose Digital Read-Out Gauge





3" Rotary Table Suitable for Myford Type Milling Slides with Clamping Kit  (Ref: ROT3B)

3

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear. EXCLUSIVE TO CHRONOS

Clamping Kit also included

41.90 50.28


Quantity: 





3" Rotary Table With Myford Threaded Chuck Adaptor  (Ref: ROT3B112185)

3

AS ABOVE BUT COMPLETE WITH A MYFORD THREADED CHUCK ADAPTOR AND MOUNTING KIT

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear. EXCLUSIVE TO CHRONOS - LIMITED QTY AVAILABLE - BE QUICK

Clamping Kit also included

65.00 78.00


Quantity: 





3" Rotary Table With Unimat M14 Threaded Chuck Adaptor  (Ref: ROT3B112195)

3

SOBA 3" ROTARY TABLE WITH A UNIMAT M14 X 1 THREADED CHUCK ADAPTOR AND MOUNTING KIT

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear. EXCLUSIVE TO CHRONOS - LIMITED QTY AVAILABLE - BE QUICK

Clamping Kit also included

65.00 78.00


Quantity: 

People who bought 3" Rotary Table With Unimat M14 Threaded Chuck Adaptor also bought::

1. Adaptor with M14 x 1 Unimat Thread





3" Rotary Table With 65 mm 3 Jaw Chuck  (Ref: ROT33J)

3

AS ABOVE BUT COMPLETE WITH A 65 MM 3 JAW CHUCK AND MOUNTING KIT

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear. EXCLUSIVE TO CHRONOS - LIMITED QTY AVAILABLE - BE QUICK

Clamping Kit also included

94.00 112.80


Quantity: 

People who bought 3" Rotary Table With 65 mm 3 Jaw Chuck also bought::

1. Set of 72 Assorted Piercing Saw Blades
2. Pack of 25 Brass Washers 8 BA
3. 1 Pack of 40 Brass 8 BA Nuts





3" Rotary Table With 70 mm 4 Jaw Chuck  (Ref: ROT34J)

3

AS ABOVE BUT COMPLETE WITH A 70MM 4 JAW INDEPENDENT CHUCK AND MOUNTING KIT

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear. EXCLUSIVE TO CHRONOS - LIMITED QTY AVAILABLE - BE QUICK

Clamping Kit also included

91.00 109.20


Quantity: 

People who bought 3" Rotary Table With 70 mm 4 Jaw Chuck also bought::

1. Soba Imperial Boring Head Kit with 2MT 3MT & Parrallel Shanks
2. New Soba 3" Rotary Table c/w 4 Jaw Chuck , Tailstock & Clamping Kit





New Soba 3" Rotary Table c/w 4 Jaw Chuck , Tailstock & Clamping Kit (Ref: 111050)

New Soba 3

AS ABOVE BUT WITH A 146105 - 70 MM 4 JAW INDEPENDENT CHUCK

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear.
Clamping Kit also included

CLICK THE IMAGE ON THE LEFT FOR A LARGER PICTURE



117.85 141.42


Quantity: 

People who bought New Soba 3" Rotary Table c/w 4 Jaw Chuck , Tailstock & Clamping Kit also bought::

1. Flycutter Suitable for Unimat 3 Lathes M14 x 1 thread
2. 3" Rotary Table With 70 mm 4 Jaw Chuck
3. HEAT JOINED PLASTIC DRIVE BELT 1/8 DIAMETER





3" Rotary Table With Milling Slide  (Ref: ROT3VMS)

3

3" Rotary Table Plus Milling Slide Suitable for Myford ML7 Lathe Etc

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear.
Milling Slide
Table size 4" x 5"
Table Travel - 80mm
EXCLUSIVE TO CHRONOS - LIMITED QTY AVAILABLE - BE QUICK

Clamping Kit also included

128.00 153.60


Quantity: 





3" Rotary Table With Double Swivel Milling Slide  (Ref: ROT3SVMS)

3

3" Rotary Table Plus Double Swivel Milling Slide Suitable for Myford ML7 Lathe Etc

Overall height of table is 1 1/2" - a useful feature if it is to be used with smaller milling attachments. The table can be locked in any position. Centre height in vertical position 1 1/2 in bringing the table within the range of most model engineering lathes & mills. The hand wheel scale which can be zeroed, is marked in degrees and 10 min divisions. The table is calibrated in 5 deg increments around the rim. Bronze worm wheel and steel worm with 36 to 1 ratio. Gear meshing is adjustable to take up wear.

Milling Slide
Table size 4" x 5"
Table Travel - 80mm

EXCLUSIVE TO CHRONOS - LIMITED QTY AVAILABLE - BE QUICK
CLICK THE IMAGE FOR A LARGER PICTURE

Clamping Kit also included

142.00 170.40


Quantity: 





3" Rotary Table Adaptor with Myford Thread  (Ref: 112185)

3

New! This handy mounting plate allows you to mount your Myford Threaded Chucks on any surface including 3 & 4" Rotary Tables with four slots
COMPLETE WITH MOUNTING KIT

Thread is standard Myford 1 1/8 x 12 TPI. CLICK THE IMAGE TO SEE THIS ITEM MOUNTED ON A SOBA 3" ROTARY TABLE

14.25 17.10


Quantity: 

People who bought 3" Rotary Table Adaptor with Myford Thread also bought::

1. 3" Rotary Table Suitable for Myford Type Milling Slides for Myford Lathes with Clamping Kit
2. 100 mm Diameter Unmachined Backplate
3. SOFT BLANK END ARBOR 3MT TANG END





3" Rotary Table Adaptor with Boxford Thread  (Ref: 112186)

3

New! This handy mounting plate allows you to mount your Boxford Threaded Chucks on any surface including 3 & 4" Rotary Tables with four slots
COMPLETE WITH MOUNTING KIT

Thread is standard Boxford 1 1/2 x 8 TPI. CLICK THE IMAGE TO SEE THIS ITEM MOUNTED ON A SOBA 3" ROTARY TABLE

14.25 17.10


Quantity: 

People who bought 3" Rotary Table Adaptor with Boxford Thread also bought::

1. 52 Pc Clamping Kit CK104B 5/8 Slot 1/2 Stud
2. Pair of 125mm Magnetic Rubber Vice Jaws
3. 6" V Angle Plate





Adaptor with M14 x 1 Unimat Thread  (Ref: 112193)

Adaptor with M14 x 1 Unimat Thread

New! This handy mounting plate allows you to mout you rUnimat Threaded Chucks on any surface including 3 & 4" Rotary Tables with four slots
COMPLETE WITH MOUNTING KIT

Thread is standard Unimat M14 x 1. CLICK THE IMAGE TO SEE THIS ITEM MOUNTED ON A SOBA 3" ROTARY TABLE

13.09 15.71


Quantity: 

People who bought Adaptor with M14 x 1 Unimat Thread also bought::

1. Set of Tube Bending Springs
2. Set of 3 HSS Slitting Saws with Arbor
3. 3" Rotary Table With Unimat M14 Threaded Chuck Adaptor





Myford Chuck Adaptor for HV6 & HV4  (Ref: MFHV6)

Myford Chuck Adaptor for HV6 & HV4

This new 2Mt chuck adaptor is already threaded 1 1/8 x 12tps to allow chucks with a Myford thread to easily be mounted to the HV4 & HV6 Rotary tables.


11.69 14.03


Quantity: 

People who bought Myford Chuck Adaptor for HV6 & HV4 also bought::

1. 4" Rotary Table HV4 Type Four Slot Model
2. Dividing Set for HV4 & HV6 Rotary Table DP1
3. Clamp Set for HV4 & HV6" Rotary Tables








Soba & Other Brand Rotary Tables and accessories - Buy online at Chronos (call us or click live chat for help with Soba & Other Brand Rotary Tables and accessories)
Visit our engineering blog