Indexable Endmills & Sets



Glanze Set of 3 Mini Indexable Endmills  (Ref: 785060)

Glanze Set of 3 Mini Indexable Endmills


16 mm Shank with Flat

Includes
1 x BDTC0816 11 Chamfer Mill
1 x BRRC 2016 06 Copy Mill
1 x BATC 2016 11 Square Mill
SCREWS & KEY

6 Inserts for the above

Head Diameters are 17.5 mm , 18.4 mm and 18.3 mm

Supplied in a plastic storage case

82.50 99.00


Quantity: 

People who bought Glanze Set of 3 Mini Indexable Endmills also bought::

1. ER32 COLLET 3-4 MM
2. Adjustable Coolant Hose Set
3. Set of 12 Solid Carbide Burrs





Little Hogger Set  (Ref: LHS)

Little Hogger Set


LITTLE HOGGER INDEXABLE ENDMILL SET NEW!!
· 1" diameter x 3/4 " shank- 2 flutes
· Mill at 5 times the speed of HSS tools plus feed at an average rate of 12" per minute
· Standard 3/4" Weldon Shanks
· Uses standard carbide inserts
· Easy insert replacement
· Uses: TNMA 322: 90deg SNMA 322 RNMA 32: 3/16R

32.97 39.56


Quantity: 

People who bought Little Hogger Set also bought::

1. Spare Tips for Little Hogger Set
2. R8 Collet 3/4
3. Grooving Tool with 12 mm High Shank





Spare Tips for Little Hogger Set (Ref: LH)

Spare Tips for Little Hogger Set

Set of 3 Spare Inserts

9.77 11.72


Quantity: 

People who bought Spare Tips for Little Hogger Set also bought::

1. Little Hogger Set
2. 1 1/8 X 12 TPI TAPER TAP - MYFORD THREAD SORRY OUT OF STOCK
3. 1 1/8 X 12 TPI PLUG TAP - MYFORD THREAD SORRY OUT OF STOCK





Glanze MT2 20 mm Indexable Endmill with 3 APKT Inserts SORRY OUT OF STOCK (Ref: 760150)

Glanze MT2 20 mm Indexable Endmill with 3 APKT Inserts      SORRY OUT OF STOCK

New !

20 mm dia cutting head with 3 x APKT1003 Inserts
MT2 Shank with 10 mm Drawbar thread


These new GLANZE Indexable Endmills offer low levels of noise and vibration. They have a true helicoil cutting edge and a hardened steel cutter body which can give a true 90 degree corner. They are suitable for shoulder milling , face milling , side milling and slotting. They employ a torx screw and key for safer grip and insert clamping .

The positive , light cutting but secure insert geometries make high metal removal rates possible , even on smaller , low powered machines . These inserts generate high quality surfaces - even at high feed rates . They cut extremley cleanly.

CLICK THE IMAGE FOR A LARGER PICTURE



66.27 79.52



People who bought Glanze MT2 20 mm Indexable Endmill with 3 APKT Inserts SORRY OUT OF STOCK also bought::

1. Spare Insert
2. HSS ENDMILL 12 MM DIAMETER
3. HSS ENDMILL 16 MM DIAMETER





Glanze MT2 25 mm Indexable Endmill with 3 APKT Inserts  (Ref: 760155)

Glanze MT2 25 mm Indexable Endmill with 3 APKT Inserts

New !

25 mm dia cutting head with 3 x APKT1003 Inserts
MT2 Shank with 10 mm Drawbar thread


These new GLANZE Indexable Endmills offer low levels of noise and vibration. They have a true helicoil cutting edge and a hardened steel cutter body which can give a true 90 degree corner. They are suitable for shoulder milling , face milling , side milling and slotting. They employ a torx screw and key for safer grip and insert clamping .

The positive , light cutting but secure insert geometries make high metal removal rates possible , even on smaller , low powered machines . These inserts generate high quality surfaces - even at high feed rates . They cut extremley cleanly.



CLICK THE IMAGE FOR A LARGER PICTURE



57.15 68.58


Quantity: 

People who bought Glanze MT2 25 mm Indexable Endmill with 3 APKT Inserts also bought::

1. Little Hogger Set
2. 1 1/8 X 12 TPI PLUG TAP - MYFORD THREAD SORRY OUT OF STOCK
3. 1 1/8 X 12 TPI TAPER TAP - MYFORD THREAD SORRY OUT OF STOCK





Glanze MT3 Indexable Endmill with 3 APKT Inserts SORRY OUT OF STOCK (Ref: 760165)

Glanze MT3 Indexable Endmill with 3 APKT Inserts  SORRY OUT OF STOCK

New !

25 mm dia cutting head with 3 x APKT1003 Inserts
MT3 Shank with 12 mm Drawbar thread


These new GLANZE Indexable Endmills offer low levels of noise and vibration. They have a true helicoil cutting edge and a hardened steel cutter body which can give a true 90 degree corner. They are suitable for shoulder milling , face milling , side milling and slotting. They employ a torx screw and key for safer grip and insert clamping .

The positive , light cutting but secure insert geometries make high metal removal rates possible , even on smaller , low powered machines . These inserts generate high quality surfaces - even at high feed rates . They cut extremley cleanly.

CLICK THE IMAGE FOR A LARGER PICTURE



61.87 74.24



People who bought Glanze MT3 Indexable Endmill with 3 APKT Inserts SORRY OUT OF STOCK also bought::

1. Spare Insert
2. SET OF 10 CCMT INSERTS
3. 1/2" Bent Lathe Dog





Spare Insert (Ref: APKT1003)

Spare Insert



6.92 8.30


Quantity: 

People who bought Spare Insert also bought::

1. Glanze MT3 Indexable Endmill with 3 APKT Inserts SORRY OUT OF STOCK
2. Glanze MT2 20 mm Indexable Endmill with 3 APKT Inserts SORRY OUT OF STOCK
3. 3/4" Bent Lathe Dog





Glanze MT2 Indexable Endmill 16mm Dia XC282  (Ref: 761416)

Glanze MT2 Indexable Endmill 16mm Dia  XC282



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
2MT Shank - Tapped 10mm for a drawbar
16mm Head Diameter

1 High Quality Carbide Insert included

31.25 37.50


Quantity: 

People who bought Glanze MT2 Indexable Endmill 16mm Dia XC282 also bought::

1. Spare Insert for 2MT Indexable Endmiils





Glanze MT2 Indexable Endmill 25mm Dia  (Ref: 761425)

Glanze MT2 Indexable Endmill 25mm Dia



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
2MT Shank - Tapped 10mm for a drawbar
25mm Head Diameter

2 High Quality Carbide Insert included

37.25 44.70


Quantity: 





Spare Insert for 2MT Indexable Endmiils  (Ref: TPAN1103)

Spare Insert for 2MT Indexable Endmiils



3.70 4.44


Quantity: 

People who bought Spare Insert for 2MT Indexable Endmiils also bought::

1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603
2. Spare Insert
3. Glanze MT2 Indexable Endmill 16mm Dia XC282





Glanze MT3 Indexable Endmill 25 mm Dia  (Ref: 761525)

Glanze MT3 Indexable Endmill 25 mm Dia

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12 mm for a drawbar
25 mm Head Diameter

2 High Quality Carbide Insert included

49.50 59.40


Quantity: 

People who bought Glanze MT3 Indexable Endmill 25 mm Dia also bought::

1. Transfer Punch 20-35mm
2. Transfer Punch 5-20mm
3. 125 MM 4 Jaw Self Centering Lathe Chuck





Glanze 3MT Indexable Endmill 32mm Head XC285 -  (Ref: 761532)

Glanze 3MT Indexable Endmill 32mm Head XC285 -



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
32mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts

46.95 56.34


Quantity: 

People who bought Glanze 3MT Indexable Endmill 32mm Head XC285 - also bought::

1. 3 MT HALF CENTRE CENTRE for Myford Lathes
2. HSS ENDMILL 20 MM DIAMETER
3. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603





Glanze MT3 Indexable Endmill 40 mm Dia  (Ref: 761440)

Glanze MT3 Indexable Endmill 40 mm Dia



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
40 mm Head Diameter

3 High Quality Carbide Insert included

39.60 47.52


Quantity: 

People who bought Glanze MT3 Indexable Endmill 40 mm Dia also bought::

1. 3/8 PHOSPHUR BRONZE ROUND
2. Phosphur Bronze Balls
3. 5/16 PHOSPHUR BRONZE ROUND





Glanze 3MT Indexable Endmill 50mm Head  (Ref: 761550)

Glanze 3MT Indexable Endmill 50mm Head



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
3MT Shank - Tapped 12mm for a drawbar
50mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts

41.90 50.28


Quantity: 

People who bought Glanze 3MT Indexable Endmill 50mm Head also bought::

1. 7" Angle Plates Open End SORRY OUT OF STOCK
2. 4 PC Combo Set - Step Drill - Drill saw - Conecut Taper Drill & Deburrer
3. Soba 6" / 150 mm Steel Rules





Glanze R8 Indexable Endmill 32 mm Dia  (Ref: 761632)

Glanze R8 Indexable Endmill 32 mm Dia



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
R8 Shank - Tapped 7/16 UNF for a drawbar
32mm Head Diameter

2 High Quality Carbide Insert included

46.85 56.22


Quantity: 

People who bought Glanze R8 Indexable Endmill 32 mm Dia also bought::

1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603
2. Albion Alloys Aluminium Sheet 0.8mm - 100 mm x 250 mm - 2 Pack
3. Sealey Drill Bit Sharpener Grinding Attachment





Glanze R8 Indexable Endmill 40 mm Dia  (Ref: 761640)

Glanze R8 Indexable Endmill 40 mm Dia



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
R8 Shank - Tapped 7/16 UNF for a drawbar
40 mm Head Diameter

3 High Quality Carbide Insert included

57.75 69.30


Quantity: 

People who bought Glanze R8 Indexable Endmill 40 mm Dia also bought::

1. Wiggler & Centre Finder Set SORRY OUT OF STOCK
2. 6-7 mm ER40 Collet
3. 5-6 mm ER40 Collet





Glanze R8 Indexable Endmill 50mm Head  (Ref: 761650)

Glanze R8 Indexable Endmill 50mm Head



The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
R8 Shank - Tapped 7/16 UNF for a drawbar
50mm Head Diameter
CLICK THE IMAGE FOR A LARGER PICTURE
3 High Quality Carbide Inserts

51.05 61.26


Quantity: 

People who bought Glanze R8 Indexable Endmill 50mm Head also bought::

1. Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603
2. 52 Pc Clamping Kit CK104B 5/8 Slot 1/2 Stud
3. Albion Alloys Aluminium Sheet 0.8mm - 100 mm x 250 mm - 2 Pack





Glanze 20mm TPAN Indexable Endmill 20 mm Straight Shank (Ref: 23001101)

Glanze 20mm TPAN Indexable Endmill 20 mm Straight Shank

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
20 mm Parallel Shank
20mm Head Diameter

1 High Quality Carbide Insert included

21.00 25.20


Quantity: 

People who bought Glanze 20mm TPAN Indexable Endmill 20 mm Straight Shank also bought::

1. 3 MT HALF CENTRE CENTRE for Myford Lathes
2. HSS ENDMILL 20 MM DIAMETER
3. Glanze 3MT Indexable Endmill 32mm Head XC285 -





Glanze 25mm TPAN Indexable Endmill 20 mm Straight Shank  (Ref: 760525)

Glanze 25mm TPAN Indexable Endmill 20 mm Straight Shank

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
20 mm Parallel Shank
25 mm Head Diameter

2 High Quality Carbide Inserts included

22.05 26.46


Quantity: 

People who bought Glanze 25mm TPAN Indexable Endmill 20 mm Straight Shank also bought::

1. R8 Collet 20 MM
2. SCT 18 pc ER32 Collet set & MT3 Holder





Glanze 32 mm TPAN Indexable Endmill 20 mm Straight Shank  (Ref: 760632)

Glanze 32 mm TPAN Indexable Endmill 20 mm Straight Shank

The Glanze range of indexable tooling is of superb quality and manufactured to strict European standards. Each tool is supplied with the appropriate high quality carbide insert(s)
20 mm Parallel Shank
32mm Head Diameter

2 High Quality Carbide Inserts included



41.90 50.28


Quantity: 





Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603 (Ref: 700211)

Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603



4.39 5.27


Quantity: 

People who bought Spare Carbide Insert for 20mm MT3 & R8 Indexable Endmills TPAN1603 also bought::

1. Glanze R8 Indexable Endmill 50mm Head
2. Glanze R8 Indexable Endmill 32 mm Dia
3. Spare Insert for 2MT Indexable Endmiils





Spare insert for 2Mt indexable Endmills (Ref: IMH52)

Spare insert for 2Mt indexable Endmills



2.98 3.58


Quantity: 

People who bought Spare insert for 2Mt indexable Endmills also bought::

1. Set of Internal & External Threading Tools 16 MM Shank
2. Set of Imperial External Threading Tools 16 MM Shank
3. Set of Imperial Internal Threading Tools 16 MM Shank





SET OF 3 INDEXABLE ENDMILLS  (Ref: SCT137S)

SET OF 3 INDEXABLE ENDMILLS


SET OF 3 WITH A 1/2" SHANK - SHANK - 1" LONG - OVERALL LENGTH 3"
INCLUDES THE FOLLOWING HEAD DIAMETERS
1/2 - 9/16 & 5/8

27.27 32.72


Quantity: 

People who bought SET OF 3 INDEXABLE ENDMILLS also bought::

1. Spare insert
2. HSS SLITTING SAW 100 MM DIA X 1 MM WIDE 128 TEETH
3. 2 pc TiN Coated HSS Step Drill Set





Spare insert (Ref: SCT137SS)

Spare insert



4.26 5.11


Quantity: 

People who bought Spare insert also bought::

1. SET OF 3 INDEXABLE ENDMILLS
2. 1 Pack of 40 10 BA Standard Steel Nuts
3. 1/8 MILD STEEL ROUND





SCT Set of 3 Indexable Endmills with APKT Insert (Ref: SCT12137S)

SCT Set of 3 Indexable Endmills with APKT Insert

Set of 3 Indexable Endmills with APKT Carbide Inserts

1/2 " Diameter Shanks

3/8" 1/2 " 5/8"

Great Quality Set in an Aluminium Storage Case

CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE



44.72 53.66


Quantity: 

People who bought SCT Set of 3 Indexable Endmills with APKT Insert also bought::

1. Endmill Holder MT 3 x 1/2
2. Proxxon Corundum Cutting Discs & Arbor - 22mm (Pkt 10) 477744
3. Proxxon Sanding Drums 150 grit - Packs 10 with Arbor 428980








Indexable Endmills & Sets - Buy online at Chronos (call us or click live chat for help with Indexable Endmills & Sets)
Visit our engineering blog