Clicky

Veritas Woodworking Tools: Special Xmas Offers (Honing System, Spokeshaves, Dovetail Saws, etc.)

<actinic:carterror_list>

Veritas MkII Honing System XMAS OFFER  (Ref: 200810X)

Veritas MkII Honing System XMAS OFFER Increased range, capacity and accuracy
Integral blade registration squares the blade and sets the bevel angle in one easy step
Three bevel-angle range configurations
Designed to accept flat and tapered blades, as well as blades with irregular geometry
Three-position eccentric roller allows a micro-bevel to be honed quickly and accurately
50mm wide roller is stable for even the narrowest of blades
Accommodates chisels as narrow as 6mm, and blades as wide as 72mm and up to 13mm thick
Works with short blades such as spokeshave blades
Manufactured from die-cast zinc alloy, with precision-machined brass and steel parts
The main feature of the Veritas Mk.II is its blade registration system squaring and setting the blade in one easy step. The Mk.II Guide has three bevel angle range configurations: a high angle (25° to 54° in seven increments), standard (15° to 40° in six increments), and a third for back bevels. The registration jig slides onto the guide body, centering and squaring the blade using an integral fence. The clamping mechanism registers on the face of the blade and is designed to accept flat and tapered blades, as well as blades with irregular geometry. The Mk.II features a three-position eccentric roller allowing a micro-bevel to be honed quickly and accurately after only a simple turn of a knob. The 50mm wide roller is stable for even the narrowest of blades. The guide can easily accommodate chisels or blades from 6 to 72mm wide and up to 13mm thick including spokeshave blades.Sharpening stone not included

£40.80 £48.96

CLICK HERE TO ORDER

  Not Reviewed.  Be the first!

Veritas Camber Roller Assembly XMAS OFFER  (Ref: 202489X)

Veritas Camber Roller Assembly XMAS OFFER Specifically designed for the Veritas Mk.II Honing Guide
Solid brass barrel-shaped roller
Allows slight curvature with an accurate and consistent bevel angle
Simply replaces the standard roller assembly
This is an attachment specifically designed for use with the Veritas Mk.II Honing Guide. When planing on large, flat surfaces, it is often desirable to hone a slight curve, or camber, into the edge of the blade. The Veritas Camber Roller Assembly has a barrel-shaped roller that allows limited rocking, whilst still maintaining an accurate and consistent bevel angle. Simply replace the standard roller assembly with the camber assembly and sharpen. The blade is still set using the registration jig, and the camber roller includes the standard eccentric system allowing micro-bevels to be honed.

£15.06 £18.07

CLICK HERE TO ORDER

  Not Reviewed.  Be the first!

BOTH THE ABOVE VERITAS HONING SYSTEM & ROLLER ASSEMBLY  (Ref: 717456)

BOTH THE ABOVE VERITAS HONING SYSTEM & ROLLER ASSEMBLY BOTH THE ABOVE VERITAS HONING SYSTEM & ROLLER ASSEMBLYIncreased range, capacity and accuracy
Integral blade registration squares the blade and sets the bevel angle in one easy step
Three bevel-angle range configurations
Designed to accept flat and tapered blades, as well as blades with irregular geometry
Three-position eccentric roller allows a micro-bevel to be honed quickly and accurately
50mm wide roller is stable for even the narrowest of blades
Accommodates chisels as narrow as 6mm, and blades as wide as 72mm and up to 13mm thick
Works with short blades such as spokeshave blades
Specifically designed for the Veritas Mk.II Honing Guide
Solid brass barrel-shaped roller
Allows slight curvature with an accurate and consistent bevel angle
Simply replaces the standard roller assembly
This is an attachment specifically designed for use with the Veritas Mk.II Honing Guide. When planing on large, flat surfaces, it is often desirable to hone a slight curve, or camber, into the edge of the blade. The Veritas Camber Roller Assembly has a barrel-shaped roller that allows limited rocking, whilst still maintaining an accurate and consistent bevel angle. Simply replace the standard roller assembly with the camber assembly and sharpen. The blade is still set using the registration jig, and the camber roller includes the standard eccentric system allowing micro-bevels to be honed.
Manufactured from die-cast zinc alloy, with precision-machined brass and steel partsThe main feature of the Veritas Mk.II is its blade registration system squaring and setting the blade in one easy step. The Mk.II Guide has three bevel angle range configurations: a high angle (25° to 54° in seven increments), standard (15° to 40° in six increments), and a third for back bevels. The registration jig slides onto the guide body, centering and squaring the blade using an integral fence. The clamping mechanism registers on the face of the blade and is designed to accept flat and tapered blades, as well as blades with irregular geometry. The Mk.II features a three-position eccentric roller allowing a micro-bevel to be honed quickly and accurately after only a simple turn of a knob. The 50mm wide roller is stable for even the narrowest of blades. The guide can easily accommodate chisels or blades from 6 to 72mm wide and up to 13mm thick including spokeshave blades.Sharpening stone not included

£52.00 £62.40

CLICK HERE TO ORDER

  Not Reviewed.  Be the first!

Veritas Dovetail Saw 230mm x 14tpi XMAS OFFER  (Ref: 210923X)

Veritas Dovetail Saw 230mm x 14tpi  XMAS OFFER Veritas Dovetail Saw 230mm x 14tpiThe saw’s spine is permanently moulded onto the back of the blade. It imparts just the right amount of weight to the blade to carry the saw effortlessly into the cut. The polished hardwood handle is shaped to fit the hand comfortably and not just to look pretty, which it also does. In fact the handle is very reminiscent of the rear tote on a bench plane and this theme is carried on in the steel rod and brass nut used to attach the handle onto the spine. A mortice and tenon joint between handle and back ensures a good solid and secure fixing between the two parts. The blade is Japanese high carbon steel, 230mm (9″) long by 40mm (1.1/2″) deep, with razor sharp 14tpi teeth filed with a 14° rake angle, the overall weight is 360g (12.7oz).

£41.50 £49.80

CLICK HERE TO ORDER

  Not Reviewed.  Be the first!

Veritas Small Crosscut Saw XMAS OFFER  (Ref: 211803X)

Veritas Small Crosscut Saw XMAS OFFER The saw has a 235mm (9.1/4″) long by 0.5mm thick high-carbon steel blade filed with 16 teeth per 25mm (16tpi). The teeth have 15° rake and bevel angles. The depth of cut is about 40mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. Overall length 360mm (14.1/4″)

£41.59 £49.91

CLICK HERE TO ORDER

  Not Reviewed.  Be the first!

Veritas Fine-Tooth Dovetail Saw XMAS OFFER  (Ref: 211804X)

Veritas Fine-Tooth Dovetail Saw XMAS OFFER For woodworkers who prefer a fine-tooth dovetail saw, Veritas produce a premium example with a 20 teeth per 25mm (20tpi blade) filed for rip cutting. It has a 235mm (9.1/4″) long by 0.5mm thick high-carbon steel blade. The teeth have a rake angle of 14°, and an included angle of 60°. The depth of cut is about 40mm (1.9/16″).The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. Overall length 360mm (14.1/4″)

£41.50 £49.80

CLICK HERE TO ORDER

  Not Reviewed.  Be the first!

VERITAS DOVETAIL SAW & SMALL CROSSCUT SAW 210923 / 210803  (Ref: 717450)

VERITAS DOVETAIL SAW & SMALL CROSSCUT SAW 210923 / 210803 SPECIAL OFFER VERITAS DOVETAIL SAW & SMALL CROSSCUT SAW 210923 / 210803 PACKAGE DEALVeritas Dovetail Saw 230mm x 14tpiThe saw’s spine is permanently moulded onto the back of the blade. It imparts just the right amount of weight to the blade to carry the saw effortlessly into the cut. The polished hardwood handle is shaped to fit the hand comfortably and not just to look pretty, which it also does. In fact the handle is very reminiscent of the rear tote on a bench plane and this theme is carried on in the steel rod and brass nut used to attach the handle onto the spine. A mortice and tenon joint between handle and back ensures a good solid and secure fixing between the two parts. The blade is Japanese high carbon steel, 230mm (9″) long by 40mm (1.1/2″) deep, with razor sharp 14tpi teeth filed with a 14° rake angle, the overall weight is 360g (12.7oz).Veritas Small Crosscut Saw

The saw has a 235mm (9.1/4″) long by 0.5mm thick high-carbon steel blade filed with 16 teeth per 25mm (16tpi). The teeth have 15° rake and bevel angles. The depth of cut is about 40mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. Overall length 360mm (14.1/4″)

£79.53 £95.44

CLICK HERE TO ORDER

  Not Reviewed.  Be the first!

VERITAS SMALL CROSSCUT SAW & FINE TOOTH DOVETAIL SAW 211803 / 211804  (Ref: 717451)

VERITAS SMALL CROSSCUT SAW & FINE TOOTH DOVETAIL SAW 211803 / 211804 SPECIAL OFFER VERITAS SMALL CROSSCUT SAW & FINE TOOTH DOVETAIL SAW 211803 / 211804Veritas Small Crosscut SawThe saw has a 235mm (9.1/4″) long by 0.5mm thick high-carbon steel blade filed with 16 teeth per 25mm (16tpi). The teeth have 15° rake and bevel angles. The depth of cut is about 40mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. Overall length 360mm (14.1/4″)
Veritas Fine-Tooth Dovetail Saw
For woodworkers who prefer a fine-tooth dovetail saw, Veritas produce a premium example with a 20 teeth per 25mm (20tpi blade) filed for rip cutting. It has a 235mm (9.1/4″) long by 0.5mm thick high-carbon steel blade. The teeth have a rake angle of 14°, and an included angle of 60°. The depth of cut is about 40mm (1.9/16″).The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. Overall length 360mm (14.1/4″)

£79.53 £95.44

CLICK HERE TO ORDER

VERITAS DOVETAIL SAW & FINE TOOTH SAW 210923 / 211804  (Ref: 717452)

VERITAS DOVETAIL SAW & FINE TOOTH SAW 210923 / 211804 SPECIAL OFFER VERITAS DOVETAIL SAW & FINE TOOTH SAW 210923 / 211804 PACKAGE Veritas Dovetail Saw 230mm x 14tpiThe saw’s spine is permanently moulded onto the back of the blade. It imparts just the right amount of weight to the blade to carry the saw effortlessly into the cut. The polished hardwood handle is shaped to fit the hand comfortably and not just to look pretty, which it also does. In fact the handle is very reminiscent of the rear tote on a bench plane and this theme is carried on in the steel rod and brass nut used to attach the handle onto the spine. A mortice and tenon joint between handle and back ensures a good solid and secure fixing between the two parts. The blade is Japanese high carbon steel, 230mm (9″) long by 40mm (1.1/2″) deep, with razor sharp 14tpi teeth filed with a 14° rake angle, the overall weight is 360g (12.7oz).Veritas Fine-Tooth Dovetail Saw For woodworkers who prefer a fine-tooth dovetail saw, Veritas produce a premium example with a 20 teeth per 25mm (20tpi blade) filed for rip cutting. It has a 235mm (9.1/4″) long by 0.5mm thick high-carbon steel blade. The teeth have a rake angle of 14°, and an included angle of 60°. The depth of cut is about 40mm (1.9/16″).The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. Overall length 360mm (14.1/4″)

£79.52 £95.42

CLICK HERE TO ORDER

VERITAS DOVETAIL SAW & FINE TOOTH SAW & CROSSCUT SAW2 10923 / 211804 / 211803  (Ref: 717453)

VERITAS DOVETAIL SAW & FINE TOOTH SAW & CROSSCUT SAW2 10923 / 211804 / 211803 SPECIAL OFFER VERITAS DOVETAIL SAW & FINE TOOTH SAW & CROSSCUT SAW210923 / 211804 / 211803 TRIPLE PACKAGE Veritas Dovetail Saw 230mm x 14tpiThe saw’s spine is permanently moulded onto the back of the blade. It imparts just the right amount of weight to the blade to carry the saw effortlessly into the cut. The polished hardwood handle is shaped to fit the hand comfortably and not just to look pretty, which it also does. In fact the handle is very reminiscent of the rear tote on a bench plane and this theme is carried on in the steel rod and brass nut used to attach the handle onto the spine. A mortice and tenon joint between handle and back ensures a good solid and secure fixing between the two parts. The blade is Japanese high carbon steel, 230mm (9″) long by 40mm (1.1/2″) deep, with razor sharp 14tpi teeth filed with a 14° rake angle, the overall weight is 360g (12.7oz).Veritas Fine-Tooth Dovetail Saw For woodworkers who prefer a fine-tooth dovetail saw, Veritas produce a premium example with a 20 teeth per 25mm (20tpi blade) filed for rip cutting. It has a 235mm (9.1/4″) long by 0.5mm thick high-carbon steel blade. The teeth have a rake angle of 14°, and an included angle of 60°. The depth of cut is about 40mm (1.9/16″).The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. Overall length 360mm (14.1/4″)Veritas Small Crosscut SawThe saw’s spine is permanently moulded onto the back of the blade. It imparts just the right amount of weight to the blade to carry the saw effortlessly into the cut. The polished hardwood handle is shaped to fit the hand comfortably and not just to look pretty, which it also does. In fact the handle is very reminiscent of the rear tote on a bench plane and this theme is carried on in the steel rod and brass nut used to attach the handle onto the spine. A mortice and tenon joint between handle and back ensures a good solid and secure fixing between the two parts. The blade is Japanese high carbon steel, 230mm (9″) long by 40mm (1.1/2″) deep, with razor sharp 14tpi teeth filed with a 14° rake angle, the overall weight is 360g (12.7oz).

£111.16 £133.39

CLICK HERE TO ORDER

Veritas Curved Base Spokeshave XMAS OFFER  (Ref: 701956X)

Veritas Curved Base Spokeshave XMAS OFFER Veritas spokeshaves have been designed for smooth, effective, chatter free shaping of chair spindles, panel edges, paddles and tool handles. The 3.2mm(1/8″) thick A2 steel blade, machined lever cap and blade bed achieve chatter free cutting in virtually all conditions. The ductile cast iron body is fitted with Bubinga handles, shaped for comfort and control. The toe serves as a thumb rest allowing the user to choke up on the body to attain exceptional control for fine work. Twin adjustment wheels quickly and accurately control cut depth and skew and shims let you adjust the mouth opening as needed.
The concave spokeshave is popular with chair and paddle makers, with a 45° bed angle and a sole radius of 33.3mm (1.5/16″), it is the first choice for a wide range of jobs from small spindles to large oars. Each spokeshave weighs about 450g (12 oz.), 267mm (10.1/2″) long overall. Veritas offer a kit which allows you to make custom handles for any of the three spokeshaves. The kit includes brass washers, hanger bolts, a mandrel for lathe mounting and assembly, plus detailed instructions.

£65.44 £78.53

 

Veritas Flat Base Spokeshave XMAS OFFER  (Ref: 701957X)

Veritas Flat Base Spokeshave XMAS OFFER Veritas spokeshaves have been designed for smooth, effective, chatter free shaping of chair spindles, panel edges, paddles and tool handles. The 3.2mm(1/8″) thick A2 steel blade, machined lever cap and blade bed achieve chatter free cutting in virtually all conditions. The ductile cast iron body is fitted with Bubinga handles, shaped for comfort and control. The toe serves as a thumb rest allowing the user to choke up on the body to attain exceptional control for fine work. Twin adjustment wheels quickly and accurately control cut depth and skew and shims let you adjust the mouth opening as needed. The flat and round spokeshaves are general workhorses, suited to practically every kind of woodworking. The round spokeshave has a 44.5mm(1.3/4″) radius. Each spokeshave weighs about 450g (12 oz.), 267mm(10.1/2″) long overall.

£62.00 £74.40

CLICK HERE TO ORDER

Veritas Concave Spokeshave XMAS OFFER  (Ref: 701959X)

Veritas Concave Spokeshave XMAS OFFER All three Veritas spokeshaves have been designed for smooth, effective, chatter free shaping of chair spindles, panel edges, paddles and tool handles. The 3.2mm(1/8″) thick A2 steel blade, machined lever cap and blade bed achieve chatter free cutting in virtually all conditions. The ductile cast iron body is fitted with Bubinga handles, shaped for comfort and control. The toe serves as a thumb rest allowing the user to choke up on the body to attain exceptional control for fine work. Twin adjustment wheels quickly and accurately control cut depth and skew and shims let you adjust the mouth opening as needed. The flat and round spokeshaves are general workhorses, suited to practically every kind of woodworking. The round spokeshave has a 44.5mm(1.3/4″) radius. The concave spokeshave is popular with chair and paddle makers, with a 45° bed angle and a sole radius of 33.3mm(1.5/16″), it is the first choice for a wide range of jobs from small spindles to large oars. Each spokeshave weighs about 450g (12 oz.), 267mm(10.1/2″) long overall.

£70.18 £84.22

CLICK HERE TO ORDER

1. Replacement Concave Blade 38mm (1.1/2″) (Ref: 701960)
  Not Reviewed.  Be the first!

VERITAS SPOKESHAVES SET OF 3 PACKAGE DEAL  (Ref: 717457)

VERITAS SPOKESHAVES SET OF 3 PACKAGE DEAL VERITAS SPOKESHAVES SET OF 3 PACKAGE DEAL
ALL THE ABOVE 3 SPOKESHAVESCURVED – FLAT & CONCAVE

£182.77 £219.32

CLICK HERE TO ORDER

Veritas Tools >  Veritas Xmas Special Offers

Veritas Xmas Special Offers
Buy online at www.quality-woodworking-tools.com with FREE mainland UK delivery for all woodworking tools

 

Recently Viewed

VERITAS SPOKESHAVES SET OF 3 PACKAGE DEALVERITAS SPOKESHAVES SET OF 3 PACKAGE DEAL Veritas Concave Spokeshave XMAS OFFERVeritas Concave Spokeshave XMAS OFFER Veritas Flat Base Spokeshave XMAS OFFERVeritas Flat Base Spokeshave XMAS OFFER Veritas Curved Base Spokeshave XMAS OFFER Veritas Curved Base Spokeshave XMAS OFFER

 

 

Veritas Tools Homepage
Veritas Checkout
0   0 View Basket
Veritas Tools UK Delivery
Christmas Offers
Free UK Delivery
 
 
 
 
VISIT OUR ENGINEERING SUPPLIES SHOWROOM
AT OUR NEW 10,000 SQ FT PREMISES
PLENTY OF FREE PARKING AND VERY
NEAR THE A5 AND M1 JUNCTION 11
Our opening times are
7.00AM – 4.00PM Mon – Fri
and
9.00AM – 12.00 noon on Saturdays.