100/38RC Hose Reducer 100mm to 38mm (4″ to 1.5″)
100/38RC Hose Reducer 100mm to 38mm (4″ to 1.5″) (SKU: 100/38RC)
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.
The table shows the outside diameter, OD, and the inside diameter, ID, for each end of the connector.
It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted.Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a minimum. A 100mm hose clamp should be used to fasten the hose the reducer.
| OD | ID | |
| From | 100mm | 93mm |
| To | 38mm | 31mm |
Listed with ExportYourStore.com
£9.00.
In stock
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.
The table shows the outside diameter, OD, and the inside diameter, ID, for each end of the connector.
It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted.Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a minimum. A 100mm hose clamp should be used to fasten the hose the reducer.
| OD | ID | |
| From | 100mm | 93mm |
| To | 38mm | 31mm |
Listed with ExportYourStore.com
100/38RC Hose Reducer 100mm to 38mm (4″ to 1.5″)
- Livechat is available if you would like any help with this product. Just mention “100/38RC Hose Reducer 100mm to 38mm (4″ to 1.5″)” in the chat.
- Call Chronos on (01582) 471900 for more info.
- Email Chronos at sales@chronos.ltd.uk
Weekly Newsletter
For advanced information on new products, regular special offers, discount codes and information regarding one-off clearance sales. We will not inundate you with junk mail or share your email address with anyone else.
