Works with the Micro-Pocket™ Drill Guide to create a 25% smaller pocket hole
For use with the Kreg Jig® K3, K4, K4MS, and the Foreman Pocket-Hole Machine (Item# DB210)
Works great in almost every application where you’d use standard Kreg® pocket holes
Especially good for 1/2″ (12mm) thick material and narrow stock, down to 1″ (25mm) wide
Faster, easier drill strokes because the bit removes less material
19/64″ (7mm) diameter, 0.170″ (4mm) diameter pilot tip
One-piece, industrial high-speed steel
Description
This unique bit works with the Micro-Pocket™ Drill Guide to create a 25% smaller pocket hole (15/16″-long). Micro-Pocket™ holes work great in virtually every application where you’d use standard pocket holes, and are especially good for 1/2″ (12mm) thick material and narrow stock, down to 1″ (25mm) wide. Because the bit removes less material, drill strokes are faster and easier.
For Use With:
Compatible with the Kreg Jig® K3, K4, K4MS, and K5, when being used with the Micro-Pocket™ Drill Guide. Also compatible with the Foreman Pocket-Hole Machine (Item# DB210).