Permagrit Rotary Ball FINE Grit 10mm
Permagrit Rotary Ball FINE Grit 10mm (SKU: RF8-10mm)
Small Rotary
Small Rotary Ball, , shaping, keying and lightening.
Shaft / arbor 3.1 mm (1/8″)
Overall length 33.5mm
Gritted length 10mm
Widest point 10mm
(all measurements are approximate)
These rotaeries enable the user to cut thin, and fragile materials, leaving the best finish. Also, use them to debur rough cut or sawn edges.
Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools.
They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging.
Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc.
Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal)
Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low – Medium.
SAFETY:- Always wear protective goggles when using Rotary Tools.
IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
Available in Fine or Coarse
£11.25.
Small Rotary
Small Rotary Ball, , shaping, keying and lightening.
Shaft / arbor 3.1 mm (1/8″)
Overall length 33.5mm
Gritted length 10mm
Widest point 10mm
(all measurements are approximate)
These rotaeries enable the user to cut thin, and fragile materials, leaving the best finish. Also, use them to debur rough cut or sawn edges.
Our Rotaries have an integral arbor, enabling them to be used in reversible drive tools.
They allow the user to cut a wide range of materials quickly and cleanly leaving an excellent finish. All rotaries are ideal for routing, shaping and removing materials without tearing or clogging.
Use on all Woods, Glass Fibre, Carbon Fibre, PCB, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics etc.
Excellent on Perspex, Plexiglass, Lexon, use below 10,000 RPM and they will not melt, crack or chip them. (not recommended for use on metal)
Note Rotaries should be fully inserted in to the chuck and tightened before using. Maximum RPM 20,000 Low – Medium.
SAFETY:- Always wear protective goggles when using Rotary Tools.
IMPORTANT:- Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.
Available in Fine or Coarse
Permagrit Rotary Ball FINE Grit 10mm
- Livechat is available if you would like any help with this product. Just mention “Permagrit Rotary Ball FINE Grit 10mm” in the chat.
- Call Chronos on (01582) 471900 for more info.
- Email Chronos at sales@chronos.ltd.uk
Weekly Newsletter
For advanced information on new products, regular special offers, discount codes and information regarding one-off clearance sales. We will not inundate you with junk mail or share your email address with anyone else.
