Horizontal/Vertical NC Tool Tightening Fixture No 50 From Chronos

•Operation is very simple and it’s very easy to tighten or untighten tool holder
•Multiple usage on tool holder taper BT,NT,SK. & CAT, It can be used horizontally and vertically, compact design for mounting on work table or tool cart.
•No need to make any adjustment
•Made from high-grade aluminium alloy material for maximum protection of tool holder

Horizontal/Vertical NC Tool Tightening Fixture No 40 (Ref: 41191102) From Chronos

•Operation is very simple and it’s very easy to tighten or untighten tool holder
•Multiple usage on tool holder taper BT,NT,SK. & CAT, It can be used horizontally and vertically, compact design for mounting on work table or tool cart.
•No need to make any adjustment
•Made from high-grade aluminium alloy material for maximum protection of tool holder

Horizontal/Vertical NC Tool Tightening Fixture No 30 (Ref: 41191101) From Chronos

•Operation is very simple and it’s very easy to tighten or untighten tool holder
•Multiple usage on tool holder taper BT,NT,SK. & CAT, It can be used horizontally and vertically, compact design for mounting on work table or tool cart.
•No need to make any adjustment
•Made from high-grade aluminium alloy material for maximum protection of tool holder

Sjobergs Elite 2000 Bench c/w Storage Module SM04- SPECIAL OFFER ! (Ref: 718151X)

Key Features:

-Designed and built by Swedish craftsmen
-European beech top
-Available as bench only or complete with storage module SM04
-Treated with a premium quality finishing oil
-Vices provide enormous clamping power
-Double row of dog holes
-Supplied with two vices and four steel bench dogs

THIS COMES COMPLETE WITH THE SJOBERGS 0042 STORAGE MODULE , JAW PROTECTORS , UNIVERSAL ANVIL AND HOLDFAST

EUROPEAN BENCH MAKING AT ITS FINEST!Sjobergs Elite cabinetmaker benches are designed and built by experienced Swedish craftsmen. Constructed in European beech; the top is 85mm thick with a 110mm apron, ready treated with a premium quality enriching finishing oil. The specially developed vices provide enormous clamping power across their 600mm (23.1/2″) width, as well as providing amazing clamping speed, accuracy and smoothness. A double row of 25mm (1″) round dogs work from both vices and across the full worktop area of 1,805 x 600mm. (Overall bench dimensions 1,945 x 740mm). The vices have an opening capacity of 145mm (5.3/4″). Supplied with top, trestle and four unbreakable round steel bench dogs which can also be used in the trestle legs. Please note: Available as bench only or complete with storage module SM04.

Sjobergs Hobby Plus 1340 Workbench Birch plus 0042 Storage Module- SPECIAL OFFER ! (Ref: 717541X)

Sjobergs of Sweden have been manufacturing top quality workbenches for over 80 years. Built to last, these benches are made from home grown Scandinavian timber. Designed for the serious hobby user, they are perfect as a second or auxiliary bench in any workshop. The trestles and under-frame are solid timber and only require a minimal amount of self assembly to become a rock solid friend. The tops are available in a tough red laminate or solid birch providing a traditional resilient work surface. The vices and top feature dog holes, allowing larger items to be securely clamped.Dimensions: 1470mm(L) x 500mm(W) x 820mm(H).

Key Features

Built to last
Made from high quality Scandinavian timber
Minimal self assembly
Hard wearing red laminate top
1470 x 500 x 820mm

THIS COMES COMPLETE WITH THE SJOBERGS 0042 STORAGE MODULE , JAW PROTECTORS , UNIVERSAL ANVIL AND HOLDFAST

NOTE – WE CAN ONLY SHIP THESE TO THE UK MAINLAND

Arbortech TurboPlane Blade – SPECIAL OFFER WHILE STOCKS LAST (Ref: 502570)

Key Features

TurboPlane wood shaping and carving blade
Attaches to 100mm(4″) and 115mm(4.1/2″) angle grinders
3 tungsten carbide cutters
Easily sharpened using a diamond file
100mm with a 22mm hole diameter
Rapid freehand wood sculpting, planing and trimming
Leaves a smooth finish requiring minimal sanding
Excellent control and balance
Outstanding for free-formed convex and concave shapes

A great addition to the very popular Arbortech range of products. Using this cutter is just like adding a rotary plane to your angle grinder. Already proving to be very popular with woodcarvers and sculptors it removes stock very quickly and leaves a great finish. Can be used on green or seasoned timber. The three durable tungsten carbide blades hold their edge well but can be easily sharpened using a diamond file when necessary.100mm diameter blade, attaches to 100mm(4″) and 115mm(4.1/2″) angle grinders.

Flexcut Hook Knife – Left & Right Handed SPECIAL OFFER !

Key Features:

-Blade is curved, similar to a gouge for working in hollows
-Right or Left handed
-Use by pulling the tool toward you

The hook knife blade is curved, similar to a gouge for working in hollows with ease and fast stock removal. The handedness (right or left) is designated by pulling the tool toward you.

Flexcut SlipStrop c/w Compound – SPECIAL OFFER ! (Ref: 717455X)

Key Features:

-For maintaining inside and outside of gouges and vee tools
-Timber moulding with areas of leather
-Supplied with bar of specially developed honing compound
-Mirror finish can be achieved quickly

Produced for honing and maintaining the edges on both the inside and outside of gouges and vee tools, the Flexcut SlipStrop consists of a complex moulding with two areas of leather and a bar of a specially developed honing compound. The compound is available separately for those wishing to use it on their existing strop. In use, the particular part of the moulding most suited to the chosen tool is rubbed crayon-like with compound and the tool stropped. A mirror finish is achieved quickly, and the resulting razor edge can be maintained by repeating the process many times before resharpening is required. Use for gouges and vee tools both inside and outside.

Flexcut Knife Strop – SPECIAL OFFER ! (Ref: 504666X)

Key Features

Flexcut leather knife strop with honing compound
Excellent for quickly restoring your edges
Can be used for other blades
Complete with Flexcut Gold Polishing Compound

Although Flexcut call this a knife strop, it can also be used for other edge tools just as effectively.If a blade has already been honed, it will benefit from stropping to polish the steel further and give an extra degree of sharpness. Regular stropping of a blade means less honing which saves time and effort.Supplied with a block of Flexcut Gold Polishing Compound for a razor edge.

Flexcut Starter Knife Set SPECIAL OFFER !! (Ref: 951172X)

Key Features:

-Excellent three knife starter set
-Contains: Cutting Knife, Detail Knife & Roughing Knife
-Honed and ready for use
-Flexcut Gold polishing compound included

Flexcut have put together the perfect package to get you started in carving with knives. These knives are made with the same edge-holding properties as their gouges and chisels and come honed and ready for use. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue. Set includes: Cutting Knife (KN12), Detail Knife (KN13) and Roughing Knife (KN14) and a block of polishing compound to maintain a razor edge.

Flexcut Starter Carving Set SK108 – 20 Piece- SPECIAL OFFER !! (Ref: 702084X)

ey Features:

-Starter Carving Set is our most complete carving set
-Everything you need for mallet, palm, or knife carving

Contains:

-SK100 ABS quick connect handle
-KN12 cutting knife
-SK103 quick connect power handle
-Flexcut SlipStrop and compound
-16 carving tools
-DVD version of Relief Carving in A Different Light
-Supplied in a wooden storage box

SK108 Starter Carving Set is our most complete carving set all in one box. It has everything you need, whether it be for mallet, palm, or knife carving. It contains the SK100 ABS Quick Connect Handle, KN12 Cutting Knife, SK103 Quick Connect Power Handle, Flexcut SlipStrop and Compound, 16 Carving Tools, Wooden Storage Box and DVD version of Relief Carving in A Different Light.The added SlipStrop Gold Compound and owners manual is the key to keeping them all sharp. There is even a place to store an optional adaptor for using these tools with a Bosch or Skil power carver.The 16 gouge profiles featured in this kit are not included in any other SK carving set.

Flexcut Palm Tool Travel Set – 5 Piece – – SPECIAL OFFER ! (Ref: 810481X)

Key Features:

-Excellent for carvers whilst travelling
-Palm handle
-Two sets available with four or ten interchangeable blades
-Pre-printed wooden blank
-Chisels can be used with Bosch Power Carver with 810480 Adaptor

These two sets are an excellent idea for the carver who wants to practice his or her craft whilst on holiday, travelling or just at odd moments throughout the day. The sets consist of a palm handle, and either four or ten interchangeable blades, a pre-printed wooden blank and full instructions, all packed in a good quality tool roll. As a bonus, with the purchase of the 810480 Adaptor, you can use the chisels with the Bosch and Skil Power Carvers.Four blade set includes: #3 x 3/8″(9mm), #6 x 5/16″(8mm), #9 x 1/16″(1.5mm) gouges, and a 70°x 1/4″(6mm) vee tool10 blade set includes: #3 x 3/8″(9mm), #3 x 5/8″(16mm), #5 x 9/16″(14mm), #6 x 5/16″(8mm), #9 x 1/16″(1.5mm), #11 x 1/8″(3mm), #11 x 1/4″(6mm) gouges, 45° x 1mm micro parting tool, 70° x 1/4″(6mm) vee tool and a #1 x 1/4″(6mm) chisel.

Flexcut Palm Tool Travel Set – 11 Piece – SPECIAL OFFER ! (Ref: 810482X)

Key Features:

-Excellent for carvers whilst travelling
-Palm handle
-Two sets available with four or ten interchangeable blades
-Pre-printed wooden blank
-Chisels can be used with Bosch Power Carver with 810480 Adaptor

These two sets are an excellent idea for the carver who wants to practice his or her craft whilst on holiday, travelling or just at odd moments throughout the day. The sets consist of a palm handle, and either four or ten interchangeable blades, a pre-printed wooden blank and full instructions, all packed in a good quality tool roll. As a bonus, with the purchase of the 810480 Adaptor, you can use the chisels with the Bosch and Skil Power Carvers.Four blade set includes: #3 x 3/8″(9mm), #6 x 5/16″(8mm), #9 x 1/16″(1.5mm) gouges, and a 70°x 1/4″(6mm) vee tool10 blade set includes: #3 x 3/8″(9mm), #3 x 5/8″(16mm), #5 x 9/16″(14mm), #6 x 5/16″(8mm), #9 x 1/16″(1.5mm), #11 x 1/8″(3mm), #11 x 1/4″(6mm) gouges, 45° x 1mm micro parting tool, 70° x 1/4″(6mm) vee tool and a #1 x 1/4″(6mm) chisel.

NEW ! Arbortech TURBOShaft (Ref: 101588) From Chronos !

Key Features

For freehand detail carving offers excellent control and safety
Fits to any standard angle grinder
Reaches into deep and narrow profiles, gets into places other tools can’t reach
Replaceable and re-sharpenable tungsten teeth
Planning action at the tip of the shaft
Use with guides or templates for accuracy

The TURBOShaft is a power carving attachment for use fitted to a 100mm (4″) or 115mm (4.1/2″) angle grinder. Designed to complement the Arbortech TURBO range or as a stand-alone tool. The TURBOShaft provides the means to carry out detailed freehand carving. It combines efficiency with exceptional control. The TURBOShaft has replaceable carbide teeth offering excellent performance and durability even in the hardest timbers. The adjustable depth gauge makes it easy to quickly set your depth of cut. The unique TURBOShaft is a versatile addition to any woodworker’s arsenal. It is particularly effective for deep and narrow profiles, detailed sculpting, template work and more.

Tormek T-4 Water Cooled Sharpening System with HTK-706 Hand Tool Kit AUTUMN OFFER ! (Ref: 717659X)

LIST PRICE £464.96 INC VAT – SUMMER OFFER PRICE £399.00 INC VAT !!

Key Features

Tormek T-4 Water Cooled Sharpening System with NVR Switch

Compact, high quality sharpening system
NVR switch, providing safety in the event of an interruption of power
200mm (8″) diameter stone
Stainless steel shaft
Sharpen your plane irons and chisels with a perfectly square edge
Ideal for sharpening hand tools, knives, scissors, woodturning and woodcarving tools
SP-650 Stone Grader and AngleMaster included
Compatible with a huge range of Tormek jigs
Strengthened housing for improved sharpening results
Solid zinc, precision machined top incorporating the handle
7 year warranty
Tormek HTK-706 Hand Tool Kit

Kit contains:

SVM-45 Short knife jig
SVM-140 Long thin knife jig
SVX-150 Scissor jig
SVS-32 Short tool jig
SVA-170 Axe grinding kit
SVM-00 Small Knife Holder
All contained in a quality storage box

Proxxon MSG Motorised Carver 702047- SPECIAL AUTUMN OFFER

For woodcarvers, model makers and joiners. With a die-cast aluminium gear head. For the carving of all types of wood. For the restoration of furniture and antiques. For lino cuts and precision paint removal. It is also possible to carve plaster. Special balanced, low noise 50W DC motor with extremely high life expectancy. Gear head made of die-cast aluminium. Main housing of glass fibre reinforced polyamide. Optional accessories include a set of five chisels (two gouges, Vee tool, chisel and curved tip chisel) and a profiled sharpening stone. The MSG is supplied in a carry case along with three high-grade bi-metal Japanese blades (gouge, Vee tool and chisel). Also available complete with the Flexcut SK109 adaptor which enables the fitting of any of the Flexcut SK range of individual carving tools.Supplied in a carry case along with three high-grade bi-metal Japanese blades (gouge, vee tool and chisel).

Length 230mm
Model MSG
Nett Weight 680g
Power 50W
Stroke Rate 10,000rpm

Clarke PSP125B 400W Puddle Pump With Auto Sensor (Ref: 7230694)

400W Puddle Pump with Auto sensor – This submersible pump is ideal for draining flooded cellars, sumps etc.

This is the perfect solution for clearing shallow bodies of water such as spillages because of its ability to pump as low as 1mm from the floor.

400W 230V motor
3 position auto sensor allows remaining water level to be set
Outlet: 11/2″ BSP with additional non-return valve
3 step outlet adaptor; 1″ BSP, 1″ hose,1 ½” hose
116l/min rated maximum flow rate
0m/7m Min/max head
Max depth 5m
Cable length 10m
Weight 4.2kg
Note: Suitable for use with clean water only

Clarke PSP105 Puddle Pump With Auto Sensor (Ref: 7230693)

250W Puddle Pump with Auto sensor – This submersible pump is ideal for draining flooded cellars, sumps etc.This is the perfect solution for clearing shallow bodies of water such as spillages because of its ability to pump as low as1mm from the floor.

250W 230V motor
3 position auto sensor allows remaining water level to be set
Outlet:1.5″ BSP with non-return valve.
3 step outlet adaptor; 1″ BSP, 1″hose,1 ½” hose
100l/min rated maximum flow rate
0m/6m Min/max head
Max depth 5m
Cable length 10m
Weight 4kg

Note: Suitable for use with clean water only

Clarke HIPPO5A 750W Submersible Pump With Float Switch (Ref: 7230536)

750W Submersible pump with float switch – This efficient submersible electric powered water pump is perfect for draining and transferring water in many different domestic situations. Examples of use include draining cellars and basements, flooded boats, pits, pools etc. It could also be used with the float switch disabled to drain blocked sinks or baths. Note: Suitable for use with clean water only

750W 230V motor
Auto start/stop float switch
Outlet:1¼” BSP with 3 step adaptor; 1¼” hose, 1” BSP, 1” hose,
208 l/min rated maximum flow rate
0m/8.5m Min/max head
Cable length 10m
Weight 5.3kg

Clarke CSV4A Submersible Pump With Float Switch (Ref: 7230604)

1300W Submersible pump with float switch – This powerful submersible electric powered water pump is perfect for draining and transferring water in many different situations. Examples of use include draining cellars and basements, ditches, footings etc.

Note: Suitable for use with clean water or dirty water.

1300W 230V motor
Float switch will automatically turn the motor off once the water level drops
Outlet: 2” BSP with 2 and 3 step adaptors; 2” hose, 11/2” BSP and 11/4” hose, 1” hose and 1” BSP
417 l/min rated maximum flow rate
0m/11m Min/max head
Max depth 7m
Cable length 10m

Clarke CPMCS1 Portable Metal Cutting Circular Saw (Ref: 6462360)

Robust metal cutting circular saw – For cutting of iron, steel and other ferrous metals

Filtered recirculated coolant
Includes vice to hold workpiece while cutting
0-45° cutting angle
Includes cutting length guide for repeated cuts.
Max cutting capacity: Round hollow section 65mm, Square hollow section 60mm, Square section 40mm

Clarke CES560 560kg Engine Stand (Ref: 7610123) From WWW.CLARKETOOLING.CO.UK

This foldable engine stand provides easy access to any part of the engine. Suitable for large engines up to 680kg in weight.

Fully adjustable mounting arms to hold different engine types
360 Degree swivel head with 8 pin increments for easy accessibility of all engine parts
2 wheels and 3 casters the 2 front swivel casters with brakes
Folds for easy storage

Clarke PSV7A 750W Submersible Pump With Folding Base (Ref: 7230696)

This powerful submersible pump is ideal for draining surface water including flooded cellars, sumps etc.

It can be used to remove both clean and dirty water. Using the fold down base allows water containing solid bodies up to 30mm in diameter to be pumped.

750W 230V motor
Adjustable position float switch automatically turns the pump off when water level drops
Outlet size 11/2” BSP with additional non-return valve and 4 step adaptor; 1” BSP/Hose, ¾” hose, ½” hose
217 l/min rated maximum flow rate
0m/8m min/max head
Max depth 7m
Cable length 10m

Clarke PSV5A Pump With Integrated Float Switch (Ref: 7236046) From WWW.CLARKETOOLING.CO.UK

750W Submersible Pump with integrated float switch.

This submersible pump is ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. It can be used to remove both clean and dirty water including particles up to 35mm dia. The integrated float switch will switch off the pump motor once the water level is reduced to a defined level. Being integrated within the pump housing it is usable in a more confined space than would be the case with conventional float switches.

750W 230V motor
Selectable manual or auto mode. In auto integrated float switch automatically turns the pump off when water level drops.
Outlet size 11/2″ BSP with elbow and 4 step adaptor; 1″ BSP/Hose, ¾” hose, ½” hose
217 l/min rated maximum flow rate
0m/8m min/max head
Max depth 7m
Cable length 10m
Weight 4.5kg