Archives for March 2016
These Vices have an an extremely high clamping power and is very accurate and durable. The enclosed lead screw and sliding surfaces are hardened and ground.
Two versions available – 4″ and 6″ Jaw Width
The Vertex BSO dividing head comprises of head stock, tail stock, set 3 dividing plates and chuck back plate
Both the phosphor bronze worm and the spindle are hardened and ground.
Ratio between the work and the worm gear is 40:1. A 24 hole plate is also fitted for quick indexing of simple numbers.
The spindle is rigidly held in a taper roller bearing and the swivel head can be locked at any angle from -10-90′. Supplied complete with test certificate Centre height is 100 mm
We offer this unit with and without a 3 jaw chuck
IMPORTANT – OUR BSO DIVIDING HEADS HAVE A 1 1/8 X 12 TPI SPINDLE THREAD COMPATIBLE WITH MYFORD AS WELL AS A PLAIN CAST BACKPLATE IF YOU WANT TO ADAPT YOUR OWN CHUCK ETC
These power table feeders are easily fitted to many of today’s popular milling machines especiall Bridgeports etc . Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. . As units are 110v we also offer a quality transformer. If you are unsure please ask
Produced by Vertex these superb milling vices combine excellent precision with a high quality finish. The body and swivel base are made of grained high tensile castings. Built for heavy duty machining. The jaws are hardened & ground.
Available in 4/ 5 / 6″ Jaw widths
Vertex – superb quality engineering tools – These tables also have a relatively low height when in the horizontal mode allowing greater working capacity in the machine. They have a totally ground finish which provides high precision and smooth rotation – everything you would expect from VERTEX. The centre of the table is fitted to an inner conical Morse tapered sleeve.
The worm gear ratio is 90:1 i.e. one revolution of the hand wheel = 4′ of rotation of the table and the vernier scale is calibrated to 10 sec.
The hardened and ground worm gear incorporate a quick release system for manual indexing. Each Vertex rotary table is issued with a numbered test certificate. Available from Chronos in 6 , 8 , 10 & 12 ” Diameter