New ! Good Quality Drill Chucks from Chronos !
Various sizes and fittings available
Threaded or Taper Mount
Also available with fitted morse taper / R8 shanks
NEW ! 240 V MILLING MACHINE POWER FEED – STANDARD 3 PIN PLUG – NO TRANSFORMER REQUIRED
These power table feeders are easily fitted to many of today’s popular milling machines especially Bridgeports etc .
Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. .
Model R.P.M Max.R.P.M Max. Torque Voltage
SCT-AL510SX 0-200 200 650 in/lb 240v
Functions with low noise, large torque, & high speed, Easy convenient installation
and flexible operation,.
This power feed is designed to
install on the right side of a knee mill table to provide powered longitudinal movement of the table.
A. Limit Switch: Stops powered table movement
when either limit stop presses a plunger
on the switch.
B. Limit Stop: Activates the limit switch. Secure
these devices along the table to set the range
C. Rapid Movement Button: Moves the table
at the maximum speed in the direction selected.
D. Direction Lever: Starts, reverses, and stops
longitudinal table movement.
E. Speed Dial: Controls the speed that the table
moves—turn the dial clockwise to increase
F. Reset Button: When a current over 3.5
amps passes through the unit for more than
10 seconds, the internal circuit switch will cut
the power to the unit. I nvestigate and resolve
any problems, then use this button to reset
the internal circuit switch.
G. ON/OFF Switch: The master power switch
for the power feed.
H. Power Lamp: Lights when the power feed is
Chronos sell engineering tools & model engineering supplies around the world via a speedy mail order service. 20,000+ engineering and woodworking products. We feature Myford Lathe compatible accessories, Clarke lathes, Unimat lathe accessories, milling machines and Vertex rotary tables and machine tool accessories. You can use our online Engineering Chat facility if you need any help, or call 01582 471900 or email firstname.lastname@example.org – . DELIVERY IS FREE to most UK mainland addresses
NEXT DAY DELIVERY is also available.
We are always adding to our extensive range and have many new products every week for your lathe , milling machine and general workshop requirements
Join our newsletter and we will email you of new items and any current special offers
We also stock an extensive range of raw materials – mild steel , silver steel , brass , copper , aluminium , copper etc as wel as engineering books , and DVD’s
NEW ! DESIGNED FOR USE WITH YOUR EXISTING GLASS OPTICAL SCALES – WE WILL SOON ALSO BE STOCKING THE SCALES IN A RANGE OF SIZES
Three Axis Model – (milling/boring/lathe/grinding/electronic spark machine) X & Y Axis
Completely sealed from dust , coolant & swarf
Includes 107 page manual , Pivoting Mounting Bracket and Standard Three Pin UK Plug
1) Zeroing Data Recovery
2) Power-down memory
3) linear compensation;
4) Input Coordinate
5) display Inch / metric.
6) Encoder selection
7) Resolution setting
8) Counting Direction Selection
9) ABS/INC Coordinate
10) 200 sets SDM Coordinate
11) Ref Ruler Storage Function
13) non-linear compensation
14) Sleeping Function
15) 1/2 Function
• Power dissipation: 15W
• Working temperature – 10 – 60 C
• Storage temperature -30 – 70 C
• Coordinate Display 1 AXIS , 2 AXIS, 3 AXIS
• Display: 8 bit display with signed
• Input frequency: • Operating keyboard: light touch buttons
• CE CERTIFICATE, ROHS REPORT, IP REPORT
• Linear scale grating space:0.04mm,0.02mm,0.01mm,power supply is +5V. The diifference between two and four TTL putput signal is 90°