Ideal for use with any standard bench grinder, the grinding attachment provides quick and precise sharpening of 3-19mm (1/8-3/4″) HSS twist drill bits with a 75mm minimum length.
Features an angle gauge with pre-sets at 41° (Countersink), 49°, 59°, 68° and 88°.
Also features a rotating neck which aids grinding both sides of the drill bit.
Perfect for use in any workshop or garage.
Sealey Tools – Best Prices and free UK mainland Delivery From The Mechanics Toolshop !
January 24, 2018 By Chronos -
The Mechanics Toolshop is the most competitive online shop for Sealey tools. Sealey is one of the largest tool and equipment suppliers in the UK and is recognised as a leading brand by professionals, mechanics and enthusiasts alike. We offer range of over 9,500 Sealey Tools, including Garage & Workshop, Bodyshop, Agricultural, Janitorial, Engineering and Vehicle Service Tools. New and innovative Sealey tools are being constantly added, never compromising on quality to achieve value for money.
SCT Drill Chucks from Chronos for your Mill , Lathe or Drilling Machine
December 29, 2017 By Chronos -
Great quality drill chucks suitable for use with you lathe , milling machine or drilling machine, Various fitting available
100 MM 4 JAW INDEPENDENT ENGINEERING LATHE CHUCKS FROM CHRONOS
December 29, 2017 By Chronos -
Popular 100 mm diameter lathe chuck – Recess type rear mount – allowing you to fit to your own backplate
Digital Readout For Sieg C2 C3 SC2 Clarke CL300 Mini Lathes From Chronos
December 29, 2017 By Chronos -
New for Sieg and similar variable speed mini lathes ! – easy to fit Digital Readout Kit
Clamp Type Knurling Tool for Mini Lathes ! New from Chronos
December 22, 2017 By Chronos -
12mm Clamp Type Knurling Tool
NEW ! – IDEAL FOR CLARKE CL300 , SIEG AND MOST OTHER SMALL MINI LATHES
This 12mm Clamp Type Knurling Tool fits any 12mm lathe tool post and is positioned so the knurling clamp above and below the centre of the work- Much better than pushing against the work !
The self-centring mechanism for a nice even finish
Knurling Wheel Diameter: 26mm.
Maximum Knurling Diameter: 25mm.
Fitted with Medium Diamond Pattern Knurls
ALSGS Power Feed Attachment For Milling Machines X Axis 240 V From Chronos
December 22, 2017 By Chronos -
These power table feeders are easily fitted to many of today’s popular milling machines especiall y Bridgeports etc .
Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. .
New 60 Degree Dovetail Cutters for Milling Machines From Chronos
June 22, 2017 By Chronos -
Made from M2 HSS these 60 degree dovetail cutters come with a standard Clarkson threaded shank to suit Autolock , Posilock etc
Metric sizes from 13 mm to 38 mm Dia
Imperial sizes from 1/2 ” t0 1 1/2″
Model Engineering Supplies from Chronos Ltd
May 31, 2017 By Chronos -
Chronos sell engineering tools & model engineering supplies around the world via a speedy mail order service. 20,000+ engineering and woodworking products. We feature Myford Lathe compatible accessories, Clarke lathes, Unimat lathe accessories, milling machines and Vertex rotary tables and machine tool accessories. You can use our online Engineering Chat facility if you need any help, or call 01582 471900 or email – sales@chronos.ltd.uk . DELIVERY IS FREE to most UK mainland addresses
Multi Function Digital Readout Box 3 Axis DRO For Lathe / Milling
May 24, 2017 By Chronos -
Three Axis Model – (milling/boring/lathe/grinding/electronic spark machine) X & Y Axis
New from Chronos !
Completely sealed from dust , coolant & swarf
Includes 107 page manual , Pivoting Mounting Bracket and Standard Three Pin UK Plug
MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) FROM CHRONOS
April 7, 2017 By Chronos -
MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) This is a scaled down version of the well known Piston Type Toolpost Systems ALL STEEL This NEW Mini Piston Type Quick Change Toolpost set provides instant tool changeover from one operation to another. It is fully hardened and ground and the working […]
Clarke Barrel II 8kW Cast Iron Wood Burning Stove (Ref: 6910101) From Chronos
October 11, 2016 By Chronos -
Clarke Barrel II 8kW Cast Iron Wood Burning Stove (Ref: 6910101) This compact and stylish wood burning stove brings warmth and ambience to any room. With a heat output of 8kW and 77.2% energy efficient it is economical and ideal for heating smaller rooms where space…Read more Heat Output (wood burning): 8kW Efficiency: 77.2% Outlet […]
Soba 4 pc Threading , Boring , Parting , Lathe Turning Kit Small (Ref: 130001)
September 27, 2016 By Chronos -
Brand new from Glanze – perfect for your small lathe
PP-U3 Cutter & Tool Grinder From Chronos
June 9, 2016 By Chronos -
Description
1. Used for grinding of HSS and carbide engraving/carving cutters with single and multiple flutes in various shapes.
2. With accessories provided the cutter grinder can be set up to grind end mills, drill bits and turning tools.
3. Grinding wheel size 100 X 50 X 20mm
4. Halogen Light 12V
5. Includes 5C Collets 4 – 6 – 8 -10 & 12 mm – Others available
The Latest Range of Clarke Heavy Duty Boltless Shelving From Clarketooling
February 12, 2016 By Chronos -
THE BRAND NEW RANGE OF CLARKE HEAVY DUTY BOLTLESS SHELVING HAS JUST BEEN ADDED TO OUR CLARKE TOOLING WEBSITE
Clarke Digicar 600 Electronic Battery Charger/Starter (Ref: 6261200) From Clarketooling
February 12, 2016 By Chronos -
The Digicar 600 is a new generation fully automatic, microprocessor controlled professional battery charger. It also provides a boost function that is designed to safely jump start modern vehicles without damaging sensitive electronics such as found in ABS, airbag sensors, ignition and audio systems. For charging AGM, Gel, Calcium and Lead acid batteries Settable charge […]
Clarke Digicar 900 Electronic Battery Charger/Starter (Ref: 6261205) from Clarke Tooling
February 12, 2016 By Chronos -
The Digicar 900 is a new generation fully automatic, microprocessor controlled professional battery charger. It also provides a boost function that is designed to safely jump start modern vehicles without damaging sensitive electronics such as found in ABS, airbag sensors, ignition and audio systems. For charging AGM, Gel, Calcium and Lead acid batteries Wheels and […]
Clarke CTJ10GLS 10 Tonne Heavy Duty Trolley Jack (Ref: 7623095) From Clarketooling
February 12, 2016 By Chronos -
The Clarke CTJ10GLS Heavy Duty Trolley Jack benefits from an extra-long reach, large 148mm diameter saddle and 10 Tonne capacity for easy lifting and a secure hold. Saddle min/max: 160/560mm Extra-long reach 1.5metre chassis Handle mounted twist release valve Handle and foot operated lifting function Control rod on handle allows it to be locked in […]
Clarke CTJ5GLS 5 Tonne Heavy Duty Commercial Trolley Jack (Ref: 7623090) From Clarketooling
February 12, 2016 By Chronos -
This Clarke heavy duty trolley jack features an extra-long reach 1.4 metre chassis and large 128mm saddle. This trolley jack also benefits from a control rod on the handle which allows it to be locked. Saddle min/max: 150/560mm Extra-long reach 1.4metre chassis Handle mounted twist release valve Handle and foot operated lifting function Control rod […]
New Glanze Indexable Parting / Grooving Tools from Chronos
December 15, 2015 By Chronos -
New from Glanze !. These Grooving and Parting Tools are supplied with Double Ended 2mm wide insert (DGN2N )
Clarke BC100C Battery Charger & Engine Starter (Ref: 6210106)
December 4, 2015 By Chronos -
Clarke battery chargers have been keeping people and their vehicles on the move for over 30 years. The BC100Cis a robust machine for both home and occasional commercial use. It includes a multi position charge regulator, a powerful boost facility and reverse polarity protection. Altogether, this model represents the ultimate in terms of performance and […]
3″ / 75 MM TILTING ROTARY TABLE SPECIAL OFFER !!
October 21, 2015 By Chronos -
This is the very latest 3″/75mm Tilting Rotary Table
Unlike inferior copies it has 4 T-slots for fixing work
Table tilts upto 90 degrees and can be used anywere in between and locked. The tilting actions is graduated
The base is 100 x 95 mm with 2 x 10mm mounting holes which are 80 mm apart
Overall height when not tilted is 55 mm
The table is graduated 0-360 degrees in 5 degree divisions
The handle is graduated 0-10 degrees in 5 minute divisions
Clarke PSP125B 400W Puddle Pump With Auto Sensor (Ref: 7230694)
September 20, 2015 By Chronos -
400W Puddle Pump with Auto sensor – This submersible pump is ideal for draining flooded cellars, sumps etc.
This is the perfect solution for clearing shallow bodies of water such as spillages because of its ability to pump as low as 1mm from the floor.
400W 230V motor
3 position auto sensor allows remaining water level to be set
Outlet: 11/2″ BSP with additional non-return valve
3 step outlet adaptor; 1″ BSP, 1″ hose,1 ½” hose
116l/min rated maximum flow rate
0m/7m Min/max head
Max depth 5m
Cable length 10m
Weight 4.2kg
Note: Suitable for use with clean water only
Clarke PSP105 Puddle Pump With Auto Sensor (Ref: 7230693)
September 20, 2015 By Chronos -
250W Puddle Pump with Auto sensor – This submersible pump is ideal for draining flooded cellars, sumps etc.This is the perfect solution for clearing shallow bodies of water such as spillages because of its ability to pump as low as1mm from the floor.
250W 230V motor
3 position auto sensor allows remaining water level to be set
Outlet:1.5″ BSP with non-return valve.
3 step outlet adaptor; 1″ BSP, 1″hose,1 ½” hose
100l/min rated maximum flow rate
0m/6m Min/max head
Max depth 5m
Cable length 10m
Weight 4kg
Note: Suitable for use with clean water only
Clarke HIPPO5A 750W Submersible Pump With Float Switch (Ref: 7230536)
September 20, 2015 By Chronos -
750W Submersible pump with float switch – This efficient submersible electric powered water pump is perfect for draining and transferring water in many different domestic situations. Examples of use include draining cellars and basements, flooded boats, pits, pools etc. It could also be used with the float switch disabled to drain blocked sinks or baths. Note: Suitable for use with clean water only
750W 230V motor
Auto start/stop float switch
Outlet:1¼” BSP with 3 step adaptor; 1¼” hose, 1” BSP, 1” hose,
208 l/min rated maximum flow rate
0m/8.5m Min/max head
Cable length 10m
Weight 5.3kg
Clarke CSV4A Submersible Pump With Float Switch (Ref: 7230604)
September 20, 2015 By Chronos -
1300W Submersible pump with float switch – This powerful submersible electric powered water pump is perfect for draining and transferring water in many different situations. Examples of use include draining cellars and basements, ditches, footings etc.
Note: Suitable for use with clean water or dirty water.
1300W 230V motor
Float switch will automatically turn the motor off once the water level drops
Outlet: 2” BSP with 2 and 3 step adaptors; 2” hose, 11/2” BSP and 11/4” hose, 1” hose and 1” BSP
417 l/min rated maximum flow rate
0m/11m Min/max head
Max depth 7m
Cable length 10m
Clarke CPMCS1 Portable Metal Cutting Circular Saw (Ref: 6462360)
September 20, 2015 By Chronos -
Robust metal cutting circular saw – For cutting of iron, steel and other ferrous metals
Filtered recirculated coolant
Includes vice to hold workpiece while cutting
0-45° cutting angle
Includes cutting length guide for repeated cuts.
Max cutting capacity: Round hollow section 65mm, Square hollow section 60mm, Square section 40mm
Clarke CES560 560kg Engine Stand (Ref: 7610123) From WWW.CLARKETOOLING.CO.UK
September 20, 2015 By Chronos -
This foldable engine stand provides easy access to any part of the engine. Suitable for large engines up to 680kg in weight.
Fully adjustable mounting arms to hold different engine types
360 Degree swivel head with 8 pin increments for easy accessibility of all engine parts
2 wheels and 3 casters the 2 front swivel casters with brakes
Folds for easy storage
Clarke PSV7A 750W Submersible Pump With Folding Base (Ref: 7230696)
September 20, 2015 By Chronos -
This powerful submersible pump is ideal for draining surface water including flooded cellars, sumps etc.
It can be used to remove both clean and dirty water. Using the fold down base allows water containing solid bodies up to 30mm in diameter to be pumped.
750W 230V motor
Adjustable position float switch automatically turns the pump off when water level drops
Outlet size 11/2” BSP with additional non-return valve and 4 step adaptor; 1” BSP/Hose, ¾” hose, ½” hose
217 l/min rated maximum flow rate
0m/8m min/max head
Max depth 7m
Cable length 10m
Clarke PSV5A Pump With Integrated Float Switch (Ref: 7236046) From WWW.CLARKETOOLING.CO.UK
September 20, 2015 By Chronos -
750W Submersible Pump with integrated float switch.
This submersible pump is ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. It can be used to remove both clean and dirty water including particles up to 35mm dia. The integrated float switch will switch off the pump motor once the water level is reduced to a defined level. Being integrated within the pump housing it is usable in a more confined space than would be the case with conventional float switches.
750W 230V motor
Selectable manual or auto mode. In auto integrated float switch automatically turns the pump off when water level drops.
Outlet size 11/2″ BSP with elbow and 4 step adaptor; 1″ BSP/Hose, ¾” hose, ½” hose
217 l/min rated maximum flow rate
0m/8m min/max head
Max depth 7m
Cable length 10m
Weight 4.5kg
Proxxon PM 40 Precision Steel Milling Vice 474981- SPECIAL OFFER ! (Ref: 24260X) For Model Engineering
June 10, 2015 By Chronos -
Precision steel vice PM 40. Milled from steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for filigree and accurate working with the MICRO miller MF 70 or the MICRO compound table KT 70. Sliding blocks and fixing screws included. Comes in a wooden box
NEW FROM CHRONOS Dasqua Universal Cutter Point Angle Gauge (Ref: 10011005)
November 12, 2014 By Chronos -
Quality Dasqua Product Made of polished stainless steel 80 x 80 x 1 mm thick Angles – 60 82 90 118 120 135 150 160 degrees Supplied in a nice storage wallet CLICK THE IMAGE FOR BIGGER PICTURES ALL DASQUA PRODUCTS COME WITH A LIFETIME GUARANTEE CLICK HERE TO ORDER CHRONOS LIMITED, Unit 2 Southfields […]
NEW FROM CHRONOS DASQUA DIGITAL ENGINEERS PROTRACTORS
November 12, 2014 By Chronos -
FEATURES High accuracy and secure reading is achieved by contactless sensor technology combined with an electronic angular analysis and digital display. . Can be zeroed in any position. 3 SIZES AVAILABLE ! Arc and arm are made of stainless steel All measuring edges are lapped The moveable measuring arm is firmly clamped with the knurled […]
Chronos ER32 Collet Set with 80mm Diameter Chuck
July 5, 2014 By Chronos -
NEW- ER 32 COLLET SETS COMPLETE WITH CHUCK FOR YOUR LATHE This set consists of a 80 mm Diameter ER32 Collet Chuck complete with clamping nut , spanner and 6 ER32 Collets in the following sizes 5-6 7-8 9-10 11-12 15-16 19-20 mm The Chuck is of the recess mount type- the recess being 55 […]
Chronos ER32 Collet Set with 100 MM Diameter Chuck
July 5, 2014 By Chronos -
NEW- ER 32 COLLET SETS COMPLETE WITH CHUCK FOR YOUR LATHE This set consists of a 100 mm Diameter ER32 Collet Chuck complete with clamping nut , spanner and 6 ER32 Collets in the following sizes 5-6 7-8 9-10 11-12 15-16 19-20 mm The Chuck is of the recess mount type- the recess being 72 […]
Chronos ER32 Collet Set with 125 MM Diameter Chuck
July 5, 2014 By Chronos -
NEW- ER 32 COLLET SETS COMPLETE WITH CHUCK FOR YOUR LATHE This set consists of a 125 mm Diameter ER32 Collet Chuck complete with clamping nut , spanner and 6 ER32 Collets in the following sizes 5-6 7-8 9-10 11-12 15-16 19-20 mm The Chuck is of the recess mount type- the recess being 95 […]
Precision Revolving Live Centres from Chronos
February 13, 2014 By Chronos -
Latest Model from Soba !- 2 & 3 Mt available This precision live centre is manufactured from high quality carbon steel to the highest standards , using precision bearings , seals and grease . The revolving centre , body & shank are hardened 30-40 HRC . Points are hardened up to 60 HRC . […]
The Repton RT1 Radius Turner (Ball Turning Attachment) from Chronos
November 8, 2013 By Chronos -
SORRY NO LONGER AVAILABLE The RT1 revolutionizes the process for turning concave or convex radii for the manual lathe market. The RT1 is unique in the way that it is mounted to the tool holder of the lathe and unlike most ball turners does not need the removal of the tool holder to mount. It is possible to swap […]
Metal Turning on the Lathe – David Clark: a New Book from Chronos
October 16, 2013 By Chronos -
Metal Turning on the Lathe by David A. Clark (Ref: CRO200) Just in at WWW.CHRONOS.LTD.UKSBN: 9781847975232 PUBLISHED: 26/09/2013 PAGES: 112 BINDING: Hardback PPC SIZE: 260×215 mm INSIDE: 239 colour illustrations The lathe is an essential tool for all but the most basic of workshops. It enables the engineer to produce turned components to a high […]
CNC Milling in the Workshop by Marcus Bowman – Book from Chronos
October 16, 2013 By Chronos -
CNC Milling in the Workshop Hardback (Ref: CRO10) A practical approach to using the CNC mill, aimed at everyone with a workshop, particularly modelmakers and horologists. CNC (computer numerical control) milling machines are now available to even the smallest of workshops, allowing designers to be more ambitious and machinists to be more confident of the production of parts, greatly […]
DRAPER REDLINE 8 DRAWER ROLLER CABINET & CHEST (Ref: 31000)
July 19, 2013 By Chronos -
REDLINE 8 DRAWER ROLL CAB SUPPLIED DIRECT TO US FROM DRAPER TOOLS BE QUICK- ONLY 12 OF THESE IN STOCK Main features: This set is built with thick guaged steel to support your whole tool kit. This item is also supplied with ball bearing runners as displayed in our images. This has a 12 month DRAPER […]
Clarke Power Tools
July 5, 2013 By Chronos -
Clarke Power Tools – Buy online at our bespoke Clarke Tools website (call us or click LIVE CHAT for help with Clarke Power Tools) Clarke Drill Accessories Clarke Clarke Hole Saws, Augers & Forstner Bit Sets Clarke Router Bits, Cutting & Grinding Discs, Diamond Blades & Wire Brushes. Clarke Drill Bits, Screwdriver […]
Draper Kapro Levels Range www.rapid-tools.co.uk
May 19, 2013 By Chronos -
Chronos are now able to offer fantastic prices on Draper Kapro Levels . Just visit our dedicated Draper Tools website at www.rapid-tools.co.uk
Chronos Special Offers on Boxed Sets of ER Collets
May 14, 2013 By Chronos -
We have just taken delivery of a consignment of High Precision Er Collets at some amazing prices ! Theses are brand new boxed sets and available in ER11 , ER16 , ER20 , ER25 , ER32 & ER40. Specifications 1.Runout:0. 005mm-0.015mm 2.Precision 0.005mm /0.008mm 3.Made of special material steel:65Mn 4.Hardness :HRC 44-48 CLICK […]
Draper & Clarke Mig Welders from Chronos
May 1, 2013 By Chronos -
We are pleased to announce that we can supply the excellent range of Mig Welders from the very well know UK suppliers Draper Tools & Clarke International . Due to our increased buying power we can now offer these products at some fantastic prices and with FREE delivery UK mainland . CLICK HERE FOR […]
Draper 140A 230V Gas/Gasless Turbo MIG Welder MWD150AT from Chronos
February 26, 2013 By Chronos -
LIST PRICE £319.30 PLUS VAT – OUR PRICE ONLY £181.00 PLUS VAT – ONLY A FEW OF THESE !!! Uses both solid or filler wire with a flux core. During the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool, making it ideal for use […]
101 pc Hand Riveter Kit with Dial Head (Ref: 70010002)
November 6, 2012 By Chronos -
LATEST MODEL – ONE HEAD FITS ALL SIZES – NO NEED TO CHANGE HEADS- JUST ROTATE TO THE SIZE YOU NEED • Drop forged steel handle • Aluminum alloy body with steel insert • High-grade steel alloy jaws • Minimum squeezing force yields maximum setting power • Return spring for easy loading and ejecting • […]
Hand Nut Riveter Kit M5 – M12 (Ref: 70010004)
November 5, 2012 By Chronos -
This kit is the latest new design and works with rivet nuts in size M5, M6, M8, M10 and M12 *Can be used on aluminium ,steel and stainless steel. *unique hidden spring design makes the handle spring back to original position automatically. *Hand screw design for loading and unloading the nuts *Ergonomic handle design for user’s comfort *Compact […]
NEW – SPIRAL DRILL SHARPENER FROM CHRONOS
November 5, 2012 By Chronos -
Spiral Drill Sharpener (Ref: 51152005) NEW – JUST ARRIVED ! Gives blunt drill bits a razor sharp cutting edge. Suitable for sharpening HSSdrill bits 9/64 – 25/64 (3.5-10mm). Quick and easy to use. Sharpener fits to all drills with a 43mm dia collar and a ½ drill chuck fitted Built-in drill bit guide ensures sharpening at correct angle Supplied with replacement grinding stone CLICK HERE TO ORDER
Milling Machines
December 8, 2011 By Chronos -
A milling machine is a machine tool used to machine solid materials. Horizontal milling machines and vertical milling machines range in size from small, bench-mounted devices to larger models. Unlike a drill press, which holds the workpiece stationary as the drill moves to penetrate the material, milling machines also move the workpiece radially against the […]
