BA spanner and socket set the set. 11 17pc
Additional Information
BA Socket and Spanner set
6 x Mini Double open ended spanners 0BA x 2BA, 1BA x 3BA, 4BA x 6BA, 5BA x 7BA, 8BA x 10BA, 9BA x 11BA
11 x 1/4″D BA Sockets: OBA, 1BA, 2BA, 3BA, 4BA, 5BA, 6BA, 7BA, 8BA, 9BA, 10BA
DASQUA PRECISION WORKSHOP TOOLS – GUARANTEED FOR LIFE
Height 50mm,with graduation 0.01mm
For setting tools to zero determining the reference point of the machine spindle
Ideal for use with any standard bench grinder, the grinding attachment provides quick and precise sharpening of 3-19mm (1/8-3/4″) HSS twist drill bits with a 75mm minimum length.
Features an angle gauge with pre-sets at 41° (Countersink), 49°, 59°, 68° and 88°.
Also features a rotating neck which aids grinding both sides of the drill bit.
Perfect for use in any workshop or garage.
New- A 9″ Diameter Faceplate to suit your Boxford Lathe
New ! From Chronos – A 9″ Diameter Faceplate for your Myford ML7 Lathe
Grade ’00’ workshop granite plate
Good temperature stability
Resistant to corrosion
Nonmagnetic
Distortion free
Excellent surface for accurate marking out
Great quality drill chucks suitable for use with you lathe , milling machine or drilling machine, Various fitting available
Popular 100 mm diameter lathe chuck – Recess type rear mount – allowing you to fit to your own backplate
New for Sieg and similar variable speed mini lathes ! – easy to fit Digital Readout Kit
12mm Clamp Type Knurling Tool
NEW ! – IDEAL FOR CLARKE CL300 , SIEG AND MOST OTHER SMALL MINI LATHES
This 12mm Clamp Type Knurling Tool fits any 12mm lathe tool post and is positioned so the knurling clamp above and below the centre of the work- Much better than pushing against the work !
The self-centring mechanism for a nice even finish
Knurling Wheel Diameter: 26mm.
Maximum Knurling Diameter: 25mm.
Fitted with Medium Diamond Pattern Knurls
These power table feeders are easily fitted to many of today’s popular milling machines especiall y Bridgeports etc .
Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. .
Hydraulic machine vices with swivel base
Features:
· Solid structure for milling, drilling and grinding
· Vice body made of high quality casting which resists deflection or bending
· Hardened and ground guide surfaces
· Hardened and ground clamping jaws,
· Booster system, little effort, high pressing power when clamping
· Protected spindle which magnifies a small force into an enormous clamping force
· Large clamping range due to locking bolts with different hole spacings
· With swivel base, 360° turnable
DASQUA PRECISION WORKSHOP TOOLS – GUARANTEED FOR LIFE
• Idea for checking hole size, location, gage slots, distance between holes,
• go & no-go gaging, setting other gages and micrometers.
• Strictly made in accordance with DIN2269
• High quality steel,hardened and tempered.
• Each gauge has been inspected.
• Packed in fitted case.
Each Gauge also individually packaged
6211-4205 91 pcs 1-10mm with 0.1mm step
Set of 6 Quality HSS Wood Turning Chisels (Ref: SCT20026S01)
6pcs high quality Hss turning tool set
Features:
Hardened blades with brass ferrules.Primary color Ash handles. Packed in wooden storage box.
Hardness: 58-62HRC
Set of 3 Indexable Endmills with APKT Carbide Inserts
1/2 ” Diameter Shanks
3/8″ 1/2 ” 5/8″
Great Quality Set in an Aluminium Storage Case
Chronos sell engineering tools & model engineering supplies around the world via a speedy mail order service. 20,000+ engineering and woodworking products. We feature Myford Lathe compatible accessories, Clarke lathes, Unimat lathe accessories, milling machines and Vertex rotary tables and machine tool accessories. You can use our online Engineering Chat facility if you need any help, or call 01582 471900 or email – sales@chronos.ltd.uk . DELIVERY IS FREE to most UK mainland addresses
Two Axis Model – (milling/boring/lathe) X & Y Axis
New from Chronos !
Completely sealed from dust , coolant & swarf
Includes 107 page manual , Pivoting Mounting Bracket and Standard Three Pin UK Plug
Three Axis Model – (milling/boring/lathe/grinding/electronic spark machine) X & Y Axis
New from Chronos !
Completely sealed from dust , coolant & swarf
Includes 107 page manual , Pivoting Mounting Bracket and Standard Three Pin UK Plug
Easy to measure all kinds of angle and draw lines.
Conversion between absolute measurement and relative measurement.
Display always reads upright,no matter which way it is turned.
Easy calibration and Zero setting.
Analogue quadrant showing for easy reading.
High accuracy vial for measuring horizontal level easily.
Lock the moving blade at any angle.
NEW FROM THE DASQUA RANGE OF PREMIUM MEASURING TOOLS
TEST INDICATOR WITH TWICE RANGE
The only one with twice range in industry
NEW FROM CHRONOS – DASQUA PRECISION WORKSHOP TOOLS – GUARANTEED FOR LIFE
TEST INDICATOR KIT WITH UNIVERSAL HOLDER
Extremly well made , accuarte item , Compact design.
Very versatile
Tabel size: 200 x 100mm
X-travel: 135 mm, Y-travel:70mm
Many Applications ! – Drive shaft alignment and wheel alignment ,Aircraft flat calibration , Setup of ,precision machines ,Road or rail-track layout ,Satellite or aerial alignment
THESE NEW DIGITAL CALIPERS HAVE A UNIQUE FLIP UP DISPLAY THAT ENABLES YOU TO USE THE CALIPER EITHER LEFT OR RIGHT HAND
• Strictly made in accordance with DIN13.
• The ground first thread pitch removes coarse swarf in the component
and prevents premature fracture of the first thread pitch.
With flip-out tilting display.
•Ultra-precise magnetic gauge sets the angle of saw blades,jointer fences,bandsaw tables and drill press tables.
•Measures both absolute level and relative bevel with reading that are always visible.
•V-groove in base for round objects like pipe and drill bits.
•Specifications:
Range: +/- 180 degrees
Reading: 0.1 degrees
Accuracy: +/- 0.1 degrees
Repeatability : +/- 0.1 degrees
Size: 2.2″ x 2.3″ x 1.3″
Strictly made in accordance with DIN862.
•IP67 protection against water,oil,dust or any other liquid.
•Large easy-to-read display.
•Silky smooth movement throughout.
•Hardened,ground and lapped measuring surfaces.
•Four-way measuring for outside,inside,depth and step
• Strictly made in accordance with DIN863
• Carbide measuring face
• Satin chrome-plated scales and operating parts
• Self-aligning and self-centering
• Ratchet stop provides uniform measuring pressure and assures highest reading accuracy
• No-removeable anvils.
• Supplied with extension and adjust setting ring(optional)
• With setting ring gage.
• Made of stainless steel,polished. • Used for drills with tip angle 118°, up to 50mm. • Hardened,ground and lapped. • Long working life-time.
DASQUA PRECISION WORKSHOP TOOLS – GUARANTEED FOR LIFE • Use this indicator to quickly center work pieces or fixtures on your boring and milling set-up. • Determining the centres of bores and shafts. • Sturdy metal housing suitable for all workshops. • Internal or External centering. • Operates at any angle from vertical to horizontal …
Dasqua Co-Axial Centering Indicator Gauge (Ref: 57121100) Read More »
NEW FROM DASQU A RANGE OF HIGH QUALITY CALIPERS AND DIVIDERS IN VARIOUS SIZES STURDY DESIGN WITH LONG ARMS , MADE OF TOOL STEEL POINTS AND MEASURING FACES GROUND & HARDENED SOLID SPINDLE WITH ADJUSTING NUT FOR QUICK AND FINE ADJUSTMENT ANNULAR SPRING PROVIDES CONSTANT SPRING TENSION CLICK THE IMAGE FOR A LARGER PICTURE
DASQUA PRECISION WORKSHOP TOOLS – GUARANTEED FOR LIFE RELIABLE HIGH PRECISION EXCELLENT SURFACE AND STABILITY HIGH DURABILITY GREAT FOR INDUSTRIAL USE MICROMETER IS NOT INCLUDED
MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) This is a scaled down version of the well known Piston Type Toolpost Systems ALL STEEL This NEW Mini Piston Type Quick Change Toolpost set provides instant tool changeover from one operation to another. It is fully hardened and ground and the working …
MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) FROM CHRONOS Read More »
Dasqua 100 KG Magnetic Base with Mechanical 3-D Jointed Arm (Ref: 73120015) Ball joints enable quick and easy positioning Continuously adjustable clamping force with high stability All pivots are controlled by one tightening knob Mechanical 3-D jointed arms with central locking All three joints are clamped in a single action V grooved base for easy mounting …
Dasqua 100 KG Magnetic Base with Mechanical 3-D Jointed Arm (Ref: 73120015) From Chronos Read More »
TELESCOPING GAUGE SET New from Dasqua- Guaranteed for Life ! LONG REACH 12 “ • Great tool for easy and accurate measurements the true sizes of holes, slots. • Satin chrome finished. • Rigid handle with self-centering feature. • Constant spring tension for uniform feel. • Contact plunger automatically self-center at all times and in …
Dasqua Telescopic Bore Gauge Set 8-150 mm Long Reach (Ref: 5911001) From Chronos Read More »
Description
1. Used for grinding of HSS and carbide engraving/carving cutters with single and multiple flutes in various shapes.
2. With accessories provided the cutter grinder can be set up to grind end mills, drill bits and turning tools.
3. Grinding wheel size 100 X 50 X 20mm
4. Halogen Light 12V
5. Includes 5C Collets 4 – 6 – 8 -10 & 12 mm – Others available
For use with drilling machines etc. . These tapping attachments utilise closing jaws therefore no collet is required. The special clutch device permits smooth drive as well as reverse. It also has a pre-set depth control to minimise tap breakage. The cushioned drive prevents thread distortion and cross threading. Covers the range 6 – 14 …
These Vices have an an extremely high clamping power and is very accurate and durable. The enclosed lead screw and sliding surfaces are hardened and ground. Two versions available – 4″ and 6″ Jaw Width
New from Glanze !. These Grooving and Parting Tools are supplied with Double Ended 2mm wide insert (DGN2N )
FANTASTIC OFFER- PRICE INCLUDES THE ROTARY TABLE , SET OF 3 DIV PLATES TAILSTOCK, AND A CLAMPING KIT
This is the very latest 3″/75mm Tilting Rotary Table
Unlike inferior copies it has 4 T-slots for fixing work
Table tilts upto 90 degrees and can be used anywere in between and locked. The tilting actions is graduated
The base is 100 x 95 mm with 2 x 10mm mounting holes which are 80 mm apart
Overall height when not tilted is 55 mm
The table is graduated 0-360 degrees in 5 degree divisions
The handle is graduated 0-10 degrees in 5 minute divisions
Key Features
Used for engraving nameplates, jewellery and other objects
Four reduction ratios
Maximum of 14 characters
Template letters and tools included
Detailed instruction manual supplied
•Operation is very simple and it’s very easy to tighten or untighten tool holder
•Multiple usage on tool holder taper BT,NT,SK. & CAT, It can be used horizontally and vertically, compact design for mounting on work table or tool cart.
•No need to make any adjustment
•Made from high-grade aluminium alloy material for maximum protection of tool holder
•Operation is very simple and it’s very easy to tighten or untighten tool holder
•Multiple usage on tool holder taper BT,NT,SK. & CAT, It can be used horizontally and vertically, compact design for mounting on work table or tool cart.
•No need to make any adjustment
•Made from high-grade aluminium alloy material for maximum protection of tool holder
•Operation is very simple and it’s very easy to tighten or untighten tool holder
•Multiple usage on tool holder taper BT,NT,SK. & CAT, It can be used horizontally and vertically, compact design for mounting on work table or tool cart.
•No need to make any adjustment
•Made from high-grade aluminium alloy material for maximum protection of tool holder
Robust metal cutting circular saw – For cutting of iron, steel and other ferrous metals
Filtered recirculated coolant
Includes vice to hold workpiece while cutting
0-45° cutting angle
Includes cutting length guide for repeated cuts.
Max cutting capacity: Round hollow section 65mm, Square hollow section 60mm, Square section 40mm
These double flute cutters are made of solid tungsten, clockwise cutting. The fishtail profile ensures cutting to the centre, allowing boring too. Usable on cast iron, hardened cast iron, steel, cast steel, brass, aluminium, and even glass, plastics and carbon fibre. One each of shaft dia. 1.0 – 2.0 and 3.0 mm. Supplied in a wooden box with sliding lid.
This Dividing Head can be used to drill off-set holes and to mill off-set slots, rectangles, hex shapes, etc. A scale on the housing enables high accuracy divisions. It includes a chuck with reversible jaws, which is able to clamp 1.5 – 32mm internally and 12 – 65mm externally. The 11mm bore allows the passage of longer workpieces when it is used in the horizontal position. It features fixing holes for horizontal & vertical assembly. Suitable for use with the Proxxon MICRO Miller MF 70 and Compound Table KT 70. Size 72 x 64 x 38mm, supplied in wooden box with sliding lid.
Precision steel vice PM 40. Milled from steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for filigree and accurate working with the MICRO miller MF 70 or the MICRO compound table KT 70. Sliding blocks and fixing screws included. Comes in a wooden box
Sievert Tools – Best Online Prices From Chronos !