These Vices have an an extremely high clamping power and is very accurate and durable. The enclosed lead screw and sliding surfaces are hardened and ground.
Two versions available – 4″ and 6″ Jaw Width
The Vertex BSO dividing head comprises of head stock, tail stock, set 3 dividing plates and chuck back plate
Both the phosphor bronze worm and the spindle are hardened and ground.
Ratio between the work and the worm gear is 40:1. A 24 hole plate is also fitted for quick indexing of simple numbers.
The spindle is rigidly held in a taper roller bearing and the swivel head can be locked at any angle from -10-90′. Supplied complete with test certificate Centre height is 100 mm
We offer this unit with and without a 3 jaw chuck
IMPORTANT – OUR BSO DIVIDING HEADS HAVE A 1 1/8 X 12 TPI SPINDLE THREAD COMPATIBLE WITH MYFORD AS WELL AS A PLAIN CAST BACKPLATE IF YOU WANT TO ADAPT YOUR OWN CHUCK ETC
Quality Dasqua Product
Made of polished stainless steel
80 x 80 x 1 mm thick
Angles – 60 82 90 118 120 135 150 160 degrees
Supplied in a nice storage wallet
CLICK THE IMAGE FOR BIGGER PICTURES
ALL DASQUA PRODUCTS COME WITH A LIFETIME GUARANTEE
CHRONOS LIMITED, Unit 2 Southfields Road, Dunstable, LU6 3EJ TEL
(01582) 471900 FAX (01582) 471920
email – firstname.lastname@example.org
This unit combines the advantages of simple indexer with those of a worm-geared indexer. When mounted on a milling, boring or other machine tool it can carry out single-purpose indexing and indirect indexing using the worm-drive mechanism.
Disengaging the worm drive the 24-notch master plate permits 2,3,4,6,8,12 and 24 dividing in the same manner as the simple index.
When the chuck is removed the unit can be used as a horizontal and vertical type rotary table. The operating handle to rotary table gear reduction ratio is 1:90.
CLICK HERE TO ORDER
JUST ARRIVED IN STOCK – CLICK HERE TO ORDER
We now have these great new Rotary Chucks from Vertex. Two sizes – 160 mm and 200 mm
3 jaw version available special order – please email email@example.com
1. 4 JAWS CHUCK IS DESIGNED WITH A SWIVEL BASE FOR MULTI FUNCTIONAL PURPOSES
2. IT’S SIMPLE & RAPID OPERATION CAN BE SET UP ON THE MILLING MACHINE’S TABLE.
3. 360 DEGREE VERNIER SCALE: SMOOTH SWIVEL MOTION & EASY CLAMPING.
4. SUITABLE FOR MILLING & DRILLING MACHINE ETC
200 mm VSR8 160 MM VSR6
Footprint- 305 mm Footprint- 245 mm
Overall Height 159 mm Overall Height 139 mm
Chuck Diameter- 200 mm Chuck Diameter- 160 mm
Bore Through Chuck – 65 mm Bore Through Chuck – 45 mm
Mounting Lugs – 18 mm Wide Mounting Lugs – 14 mm Wide