New ! Good Quality Drill Chucks from Chronos !
Various sizes and fittings available
Threaded or Taper Mount
Also available with fitted morse taper / R8 shanks
NEW – FROM CHRONOS
Our BT40 ER Collet Chucks have a 5 micron run out accuracy & AT3 class taper.
Balanced Holder G6.3 with 15,000 RPM
AT3 class accuracy
Made from carburized alloy steel with case hardening and quench hardening heat,work surface hardnsll to HRC 53-57
“Taper accuracy AT3,ensure well contact with spindle cone for high speed running to protect the spindle.”
All parts are precision fully ground for accurate fit
Offer more rigidity and better accuracy
Concentricity and runout accuracy </=0.005mm in high rpm.
AVAILABLE TO SUIT ER 25 , ER32 & ER40 COLLETS
NEW ! 240 V MILLING MACHINE POWER FEED – STANDARD 3 PIN PLUG – NO TRANSFORMER REQUIRED
These power table feeders are easily fitted to many of today’s popular milling machines especially Bridgeports etc .
Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. .
Model R.P.M Max.R.P.M Max. Torque Voltage
SCT-AL510SX 0-200 200 650 in/lb 240v
Functions with low noise, large torque, & high speed, Easy convenient installation
and flexible operation,.
This power feed is designed to
install on the right side of a knee mill table to provide powered longitudinal movement of the table.
A. Limit Switch: Stops powered table movement
when either limit stop presses a plunger
on the switch.
B. Limit Stop: Activates the limit switch. Secure
these devices along the table to set the range
C. Rapid Movement Button: Moves the table
at the maximum speed in the direction selected.
D. Direction Lever: Starts, reverses, and stops
longitudinal table movement.
E. Speed Dial: Controls the speed that the table
moves—turn the dial clockwise to increase
F. Reset Button: When a current over 3.5
amps passes through the unit for more than
10 seconds, the internal circuit switch will cut
the power to the unit. I nvestigate and resolve
any problems, then use this button to reset
the internal circuit switch.
G. ON/OFF Switch: The master power switch
for the power feed.
H. Power Lamp: Lights when the power feed is
New From Chronos
Hydraulic machine vice with swivel base
3 Models Available – 100 mm , 125 ,, & 155 mm jaw width
· Solid structure for milling, drilling and grinding
· Vice body made of high quality casting which resists deflection or bending
· Hardened and ground guide surfaces
· Hardened and ground clamping jaws,
· Booster system, little effort, high pressing power when clamping
· Protected spindle which magnifies a small force into an enormous clamping force
· Large clamping range due to locking bolts with different hole spacings
· With swivel base, 360° turntable
New From SCT !
This week we have added the SCT range of HSS Dovetail Cutters .
Made from M2 HSS these 60 degree dovetail cutters come with a standard Clarkson threaded shank to suit Autolock , Posilock etc
Metric sizes from 13 mm to 38 mm Dia
Imperial sizes from 1/2 ” t0 1 1/2″