Laser Model Engineers BA Spanner & Socket Set 17pc (Ref: 7132)

BA spanner and socket set the set. 11 17pc

Additional Information
BA Socket and Spanner set
6 x Mini Double open ended spanners 0BA x 2BA, 1BA x 3BA, 4BA x 6BA, 5BA x 7BA, 8BA x 10BA, 9BA x 11BA
11 x 1/4″D BA Sockets: OBA, 1BA, 2BA, 3BA, 4BA, 5BA, 6BA, 7BA, 8BA, 9BA, 10BA

Sealey Drill Bit Sharpener Grinding Attachment (Ref: SMS01)

Ideal for use with any standard bench grinder, the grinding attachment provides quick and precise sharpening of 3-19mm (1/8-3/4″) HSS twist drill bits with a 75mm minimum length.
Features an angle gauge with pre-sets at 41° (Countersink), 49°, 59°, 68° and 88°.
Also features a rotating neck which aids grinding both sides of the drill bit.
Perfect for use in any workshop or garage.

Sealey Tools – Best Prices and free UK mainland Delivery From The Mechanics Toolshop !

The Mechanics Toolshop is the most competitive online shop for Sealey tools. Sealey is one of the largest tool and equipment suppliers in the UK and is recognised as a leading brand by professionals, mechanics and enthusiasts alike. We offer range of over 9,500 Sealey Tools, including Garage & Workshop, Bodyshop, Agricultural, Janitorial, Engineering and Vehicle Service Tools. New and innovative Sealey tools are being constantly added, never compromising on quality to achieve value for money.

SCT Granite Surface Plates from Chronos

Grade ’00’ workshop granite plate
Good temperature stability
Resistant to corrosion
Nonmagnetic
Distortion free
Excellent surface for accurate marking out

Clamp Type Knurling Tool for Mini Lathes ! New from Chronos

12mm Clamp Type Knurling Tool
NEW ! – IDEAL FOR CLARKE CL300 , SIEG AND MOST OTHER SMALL MINI LATHES

This 12mm Clamp Type Knurling Tool fits any 12mm lathe tool post and is positioned so the knurling clamp above and below the centre of the work- Much better than pushing against the work !

The self-centring mechanism for a nice even finish

Knurling Wheel Diameter: 26mm.
Maximum Knurling Diameter: 25mm.
Fitted with Medium Diamond Pattern Knurls

ALSGS Power Feed Attachment For Milling Machines X Axis 240 V From Chronos

These power table feeders are easily fitted to many of today’s popular milling machines especiall y Bridgeports etc .
Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. .

Hydraulic Power Milling Machine Vices With Swivel Base

Hydraulic machine vices with swivel base

Features:

· Solid structure for milling, drilling and grinding
· Vice body made of high quality casting which resists deflection or bending
· Hardened and ground guide surfaces
· Hardened and ground clamping jaws,
· Booster system, little effort, high pressing power when clamping
· Protected spindle which magnifies a small force into an enormous clamping force
· Large clamping range due to locking bolts with different hole spacings
· With swivel base, 360° turnable

Dasqua Pin Gauge Set 91 pcs 1 – 10 mm x 0.1 mm From Chronos

DASQUA PRECISION WORKSHOP TOOLS – GUARANTEED FOR LIFE

• Idea for checking hole size, location, gage slots, distance between holes,
• go & no-go gaging, setting other gages and micrometers.
• Strictly made in accordance with DIN2269
• High quality steel,hardened and tempered.
• Each gauge has been inspected.
• Packed in fitted case.
Each Gauge also individually packaged

6211-4205 91 pcs 1-10mm with 0.1mm step

Model Engineering Supplies from Chronos Ltd

Chronos sell engineering tools & model engineering supplies around the world via a speedy mail order service. 20,000+ engineering and woodworking products. We feature Myford Lathe compatible accessories, Clarke lathes, Unimat lathe accessories, milling machines and Vertex rotary tables and machine tool accessories. You can use our online Engineering Chat facility if you need any help, or call 01582 471900 or email – sales@chronos.ltd.uk . DELIVERY IS FREE to most UK mainland addresses

Angelo Digital Angle Finder / Spirit Level (Ref: 30321001) From Chronos

Easy to measure all kinds of angle and draw lines.
Conversion between absolute measurement and relative measurement.
Display always reads upright,no matter which way it is turned.
Easy calibration and Zero setting.
Analogue quadrant showing for easy reading.
High accuracy vial for measuring horizontal level easily.
Lock the moving blade at any angle.

Dasqua Digital Angle Gauge with Flip Out Display (Ref: 84000000)

With flip-out tilting display.
•Ultra-precise magnetic gauge sets the angle of saw blades,jointer fences,bandsaw tables and drill press tables.
•Measures both absolute level and relative bevel with reading that are always visible.
•V-groove in base for round objects like pipe and drill bits.
•Specifications:
Range: +/- 180 degrees
Reading: 0.1 degrees
Accuracy: +/- 0.1 degrees
Repeatability : +/- 0.1 degrees
Size: 2.2″ x 2.3″ x 1.3″

DASQUA THREE POINTS INSIDE MICROMETERS FROM CHRONOS

• Strictly made in accordance with DIN863
• Carbide measuring face
• Satin chrome-plated scales and operating parts
• Self-aligning and self-centering
• Ratchet stop provides uniform measuring pressure and assures highest reading accuracy
• No-removeable anvils.
• Supplied with extension and adjust setting ring(optional)
• With setting ring gage.

DASQUA DIAL BORE GAUGES FROM CHRONOS

DASQUA PRECISION WORKSHOP TOOLS – GUARANTEED FOR LIFE PRECISION DIAL BORE GAGE • For close tolerance measurement of holes, taper and roundness. • Carbide anvils; supply with fixed or inserting anvils. • Extensions and washers for fine adjustment in sizes to select a specific range. • Ergonomic design with non-slip insulating grip. SIX MODELS AVAILABLE …

DASQUA DIAL BORE GAUGES FROM CHRONOS Read More »

MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) FROM CHRONOS

MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) This is a scaled down version of the well known Piston Type Toolpost Systems ALL STEEL This NEW Mini Piston Type Quick Change Toolpost set provides instant tool changeover from one operation to another. It is fully hardened and ground and the working …

MINI QUICK CHANGE TOOL POST AND HOLDER SET – PISTON TYPE (Ref: 40053101) FROM CHRONOS Read More »

Dasqua 100 KG Magnetic Base with Mechanical 3-D Jointed Arm (Ref: 73120015) From Chronos

Dasqua 100 KG Magnetic Base with Mechanical 3-D Jointed Arm (Ref: 73120015) Ball joints enable quick and easy positioning Continuously adjustable clamping force with high stability All pivots are controlled by one tightening knob Mechanical 3-D jointed arms with central locking All three joints are clamped in a single action V grooved base for easy mounting …

Dasqua 100 KG Magnetic Base with Mechanical 3-D Jointed Arm (Ref: 73120015) From Chronos Read More »

Dasqua Universal Bevel Protractor with Fine Adjustment (Ref: 10312005) From Chronos

• Clear graduations and numbering of the scale disc 4×90°. • Vernier and scale disc are on a common plane thus guaranteeing error-free,parallax-free reading. • With magnifying glass for easier and faster reading. • Measuring disc anti-glare chrome-plated. • With additional angle plate. • The adjustment of the base plate is 4×90°. • Hardened measuring …

Dasqua Universal Bevel Protractor with Fine Adjustment (Ref: 10312005) From Chronos Read More »

Dasqua Telescopic Bore Gauge Set 8-150 mm Long Reach (Ref: 5911001) From Chronos

TELESCOPING GAUGE SET New from Dasqua- Guaranteed for Life ! LONG REACH 12 “ • Great tool for easy and accurate measurements the true sizes of holes, slots. • Satin chrome finished. • Rigid handle with self-centering feature. • Constant spring tension for uniform feel. • Contact plunger automatically self-center at all times and in …

Dasqua Telescopic Bore Gauge Set 8-150 mm Long Reach (Ref: 5911001) From Chronos Read More »

PP-U3 Cutter & Tool Grinder From Chronos

Description
1. Used for grinding of HSS and carbide engraving/carving cutters with single and multiple flutes in various shapes.
2. With accessories provided the cutter grinder can be set up to grind end mills, drill bits and turning tools.
3. Grinding wheel size 100 X 50 X 20mm
4. Halogen Light 12V
5. Includes 5C Collets 4 – 6 – 8 -10 & 12 mm – Others available

Vertex VA4 & VA6 Milling Machine Vices from Chronos

These Vices have an  an extremely high clamping power and is very accurate and durable. The enclosed lead screw and sliding surfaces are hardened and ground. Two versions available – 4″ and 6″ Jaw Width  

Vertex K Type Milling Machine Vices From Chronos

Produced by Vertex these superb milling vices combine excellent precision with a high quality finish. The body and swivel base are made of grained high tensile castings. Built for heavy duty machining. The jaws are hardened & ground. Available in 4/ 5 / 6″ Jaw widths 

3″ / 75 MM TILTING ROTARY TABLE SPECIAL OFFER !!

This is the very latest 3″/75mm Tilting Rotary Table
Unlike inferior copies it has 4 T-slots for fixing work
Table tilts upto 90 degrees and can be used anywere in between and locked. The tilting actions is graduated
The base is 100 x 95 mm with 2 x 10mm mounting holes which are 80 mm apart
Overall height when not tilted is 55 mm
The table is graduated 0-360 degrees in 5 degree divisions
The handle is graduated 0-10 degrees in 5 minute divisions

Clarke CPMCS1 Portable Metal Cutting Circular Saw (Ref: 6462360)

Robust metal cutting circular saw – For cutting of iron, steel and other ferrous metals

Filtered recirculated coolant
Includes vice to hold workpiece while cutting
0-45° cutting angle
Includes cutting length guide for repeated cuts.
Max cutting capacity: Round hollow section 65mm, Square hollow section 60mm, Square section 40mm

Chronos Connecto Product Range from Albion Alloys

3D shapes made from tube – cubes, rectangles, pyramids etc. ideal for education/ architecture projects. Available for use with tubes ranging from 0.4mm to 1.4mm in 0.1mm increments. Product code is a guide as to which size tube it is to be used with – i.e. use Connecto AAC09 with MBT09

Proxxon 3 Piece Tungsten Milling Cutter Set- SPECIAL OFFER !! (Ref: 27116X)

These double flute cutters are made of solid tungsten, clockwise cutting. The fishtail profile ensures cutting to the centre, allowing boring too. Usable on cast iron, hardened cast iron, steel, cast steel, brass, aluminium, and even glass, plastics and carbon fibre. One each of shaft dia. 1.0 – 2.0 and 3.0 mm. Supplied in a wooden box with sliding lid.

Proxxon Dividing Head for MF70 & TBM220 474592 – SPECIAL OFFER (Ref: 24264X)

This Dividing Head can be used to drill off-set holes and to mill off-set slots, rectangles, hex shapes, etc. A scale on the housing enables high accuracy divisions. It includes a chuck with reversible jaws, which is able to clamp 1.5 – 32mm internally and 12 – 65mm externally. The 11mm bore allows the passage of longer workpieces when it is used in the horizontal position. It features fixing holes for horizontal & vertical assembly. Suitable for use with the Proxxon MICRO Miller MF 70 and Compound Table KT 70. Size 72 x 64 x 38mm, supplied in wooden box with sliding lid.