New ! Good Quality Drill Chucks from Chronos !
Various sizes and fittings available
Threaded or Taper Mount
Also available with fitted morse taper / R8 shanks
NEW ! 240 V MILLING MACHINE POWER FEED – STANDARD 3 PIN PLUG – NO TRANSFORMER REQUIRED
These power table feeders are easily fitted to many of today’s popular milling machines especially Bridgeports etc .
Both left and right directional feed are possible and the units incorporate an overload cut out and reset control. The limit switches are fully adjustable to control the feed travel. .
Model R.P.M Max.R.P.M Max. Torque Voltage
SCT-AL510SX 0-200 200 650 in/lb 240v
Functions with low noise, large torque, & high speed, Easy convenient installation
and flexible operation,.
This power feed is designed to
install on the right side of a knee mill table to provide powered longitudinal movement of the table.
A. Limit Switch: Stops powered table movement
when either limit stop presses a plunger
on the switch.
B. Limit Stop: Activates the limit switch. Secure
these devices along the table to set the range
C. Rapid Movement Button: Moves the table
at the maximum speed in the direction selected.
D. Direction Lever: Starts, reverses, and stops
longitudinal table movement.
E. Speed Dial: Controls the speed that the table
moves—turn the dial clockwise to increase
F. Reset Button: When a current over 3.5
amps passes through the unit for more than
10 seconds, the internal circuit switch will cut
the power to the unit. I nvestigate and resolve
any problems, then use this button to reset
the internal circuit switch.
G. ON/OFF Switch: The master power switch
for the power feed.
H. Power Lamp: Lights when the power feed is
New From Chronos
Hydraulic machine vice with swivel base
3 Models Available – 100 mm , 125 ,, & 155 mm jaw width
· Solid structure for milling, drilling and grinding
· Vice body made of high quality casting which resists deflection or bending
· Hardened and ground guide surfaces
· Hardened and ground clamping jaws,
· Booster system, little effort, high pressing power when clamping
· Protected spindle which magnifies a small force into an enormous clamping force
· Large clamping range due to locking bolts with different hole spacings
· With swivel base, 360° turntable
SCT 3″/75 mm Tilting Drill Press Vice (Ref: SCT40080001)
QK-D series tilting vices can be tilted to any position from 0~90 °
Use in your drilling machine for machining inclinable surfaces
Made by high quality Solid cast-iron
Base facilitates an endless combination of mounting options
Perfect for those difficult drill press applications
CLICK THE IMAGE ON THE LEFT FOR A BIGGER PICTURE
JAW WIDTH JAW DEPTH JAW OPENDING
3″(75mm) 1-3/8″(35mm) 3″(76mm)
BASE- 160 MM X 160 MM
HEIGHT WHEN NOT TILTED – 110 MM
4 MOUNTING SLOTS EITHER SIDE – 135 MM CENTRE TO CENTRE
2 ACROSS THE OTHER SIDE 150 MM CENTRE TO CENTRE
V JAW FOR ROUND MATERIAL
WEIGHT 5.5 KG
4″/100 mm Model also available
New From SCT !
This week we have added the SCT range of HSS Dovetail Cutters .
Made from M2 HSS these 60 degree dovetail cutters come with a standard Clarkson threaded shank to suit Autolock , Posilock etc
Metric sizes from 13 mm to 38 mm Dia
Imperial sizes from 1/2 ” t0 1 1/2″